x-ui.sh

#!/bin/bash

red='\033[0;31m'
green='\033[0;32m'
blue='\033[0;34m'
yellow='\033[0;33m'
plain='\033[0m'

#Add some basic function here
function LOGD() {
    echo -e "${yellow}[DEG] $* ${plain}"
}

function LOGE() {
    echo -e "${red}[ERR] $* ${plain}"
}

function LOGI() {
    echo -e "${green}[INF] $* ${plain}"
}

is_ipv4_address() {
    local ip=$1
    [[ $ip =~ ^([0-9]{1,3}\.){3}[0-9]{1,3}$ ]] || return 1

    local octet
    IFS='.' read -r -a octets <<<"$ip"
    for octet in "${octets[@]}"; do
        if ((octet < 0 || octet > 255)); then
            return 1
        fi
    done

    return 0
}

is_ipv6_address() {
    local ip=$1
    [[ $ip == *:* ]] || return 1
    [[ $ip =~ ^[0-9A-Fa-f:]+$ ]]
}

is_ip_address() {
    local host=$1
    is_ipv4_address "$host" || is_ipv6_address "$host"
}

format_host_for_url() {
    local host=$1
    if is_ipv6_address "$host"; then
        printf '[%s]' "$host"
    else
        printf '%s' "$host"
    fi
}

# check root
[[ $EUID -ne 0 ]] && LOGE "ERROR: You must be root to run this script! \n" && exit 1

# Check OS and set release variable
if [[ -f /etc/os-release ]]; then
    source /etc/os-release
    release=$ID
elif [[ -f /usr/lib/os-release ]]; then
    source /usr/lib/os-release
    release=$ID
else
    echo "Failed to check the system OS, please contact the author!" >&2
    exit 1
fi

echo "The OS release is: $release"

check_glibc_version() {
    glibc_version=$(ldd --version | head -n1 | awk '{print $NF}')

    required_version="2.32"
    if [[ "$(printf '%s\n' "$required_version" "$glibc_version" | sort -V | head -n1)" != "$required_version" ]]; then
        echo -e "${red}GLIBC version $glibc_version is too old! Required: 2.32 or higher${plain}"
        echo "Please upgrade to a newer version of your operating system to get a higher GLIBC version."
        exit 1
    fi
    echo "GLIBC version: $glibc_version (meets requirement of 2.32+)"
}
check_glibc_version

os_version=""
os_version=$(grep "^VERSION_ID" /etc/os-release | cut -d '=' -f2 | tr -d '"' | tr -d '.')

# Declare Variables
log_folder="${XUI_LOG_FOLDER:=/var/log}"
iplimit_log_path="${log_folder}/3xipl.log"
iplimit_banned_log_path="${log_folder}/3xipl-banned.log"

confirm() {
    if [[ $# > 1 ]]; then
        echo && read -p "$1 [Default $2]: " temp
        if [[ "${temp}" == "" ]]; then
            temp=$2
        fi
    else
        read -p "$1 [y/n]: " temp
    fi
    if [[ "${temp}" == "y" || "${temp}" == "Y" ]]; then
        return 0
    else
        return 1
    fi
}

confirm_restart() {
    confirm "Restart the panel, Attention: Restarting the panel will also restart xray" "y"
    if [[ $? == 0 ]]; then
        restart
    else
        show_menu
    fi
}

before_show_menu() {
    echo && echo -n -e "${yellow}Press enter to return to the main menu: ${plain}" && read temp
    show_menu
}

install() {
    bash <(curl -Ls https://raw.githubusercontent.com/AghayeCoder/tx-ui/main/install.sh)
    if [[ $? == 0 ]]; then
        if [[ $# == 0 ]]; then
            start
        else
            start 0
        fi
    fi
}

update() {
    confirm "This function will forcefully reinstall the latest version, and the data will not be lost. Do you want to continue?" "y"
    if [[ $? != 0 ]]; then
        LOGE "Cancelled"
        if [[ $# == 0 ]]; then
            before_show_menu
        fi
        return 0
    fi
    bash <(curl -Ls https://raw.githubusercontent.com/AghayeCoder/tx-ui/main/install.sh)
    if [[ $? == 0 ]]; then
        LOGI "Update is complete, Panel has automatically restarted "
        before_show_menu
    fi
}

update_menu() {
    echo -e "${yellow}Updating Menu${plain}"
    confirm "This function will update the menu to the latest changes." "y"
    if [[ $? != 0 ]]; then
        LOGE "Cancelled"
        if [[ $# == 0 ]]; then
            before_show_menu
        fi
        return 0
    fi

    wget --no-check-certificate -O /usr/bin/x-ui https://raw.githubusercontent.com/AghayeCoder/tx-ui/main/x-ui.sh
    chmod +x /usr/local/x-ui/x-ui.sh
    chmod +x /usr/bin/x-ui

    if [[ $? == 0 ]]; then
        echo -e "${green}Update successful. The panel has automatically restarted.${plain}"
        before_show_menu
    else
        echo -e "${red}Failed to update the menu.${plain}"
        return 1
    fi
}

legacy_version() {
    echo "Enter the panel version (like 0.2):"
    read tag_version

    if [ -z "$tag_version" ]; then
        echo "Panel version cannot be empty. Exiting."
        exit 1
    fi
    # Use the entered panel version in the download link
    install_command="bash <(curl -Ls "https://raw.githubusercontent.com/AghayeCoder/tx-ui/v$tag_version/install.sh") v$tag_version"

    echo "Downloading and installing panel version $tag_version..."
    eval $install_command
}

# Function to handle the deletion of the script file
delete_script() {
    rm "$0" # Remove the script file itself
    exit 1
}

uninstall() {
    confirm "Are you sure you want to uninstall the panel? xray will also uninstalled!" "n"
    if [[ $? != 0 ]]; then
        if [[ $# == 0 ]]; then
            show_menu
        fi
        return 0
    fi
    systemctl stop x-ui
    systemctl disable x-ui
    rm /etc/systemd/system/x-ui.service -f
    systemctl daemon-reload
    systemctl reset-failed
    rm /etc/x-ui/ -rf
    rm /usr/local/x-ui/ -rf

    echo ""
    echo -e "Uninstalled Successfully.\n"
    echo "If you need to install this panel again, you can use below command:"
    echo -e "${green}bash <(curl -Ls https://raw.githubusercontent.com/AghayeCoder/tx-ui/master/install.sh)${plain}"
    echo ""
    # Trap the SIGTERM signal
    trap delete_script SIGTERM
    delete_script
}

reset_user() {
    confirm "Are you sure to reset the username and password of the panel?" "n"
    if [[ $? != 0 ]]; then
        if [[ $# == 0 ]]; then
            show_menu
        fi
        return 0
    fi
    read -rp "Please set the login username [default is a random username]: " config_account
    [[ -z $config_account ]] && config_account=$(date +%s%N | md5sum | cut -c 1-8)
    read -rp "Please set the login password [default is a random password]: " config_password
    [[ -z $config_password ]] && config_password=$(date +%s%N | md5sum | cut -c 1-8)
    /usr/local/x-ui/x-ui setting -username ${config_account} -password ${config_password} >/dev/null 2>&1
    /usr/local/x-ui/x-ui setting -remove_secret >/dev/null 2>&1
    echo -e "Panel login username has been reset to: ${green} ${config_account} ${plain}"
    echo -e "Panel login password has been reset to: ${green} ${config_password} ${plain}"
    echo -e "${yellow} Panel login secret token disabled ${plain}"
    echo -e "${green} Please use the new login username and password to access the X-UI panel. Also remember them! ${plain}"
    confirm_restart
}

gen_random_string() {
    local length="$1"
    local random_string=$(LC_ALL=C tr -dc 'a-zA-Z0-9' </dev/urandom | fold -w "$length" | head -n 1)
    echo "$random_string"
}

reset_webbasepath() {
    echo -e "${yellow}Resetting Web Base Path${plain}"

    read -rp "Are you sure you want to reset the web base path? (y/n): " confirm
    if [[ $confirm != "y" && $confirm != "Y" ]]; then
        echo -e "${yellow}Operation canceled.${plain}"
        return
    fi

    config_webBasePath=$(gen_random_string 10)

    # Apply the new web base path setting
    /usr/local/x-ui/x-ui setting -webBasePath "${config_webBasePath}" >/dev/null 2>&1
    
    echo -e "Web base path has been reset to: ${green}${config_webBasePath}${plain}"
    echo -e "${green}Please use the new web base path to access the panel.${plain}"
    restart
}

reset_config() {
    confirm "Are you sure you want to reset all panel settings, Account data will not be lost, Username and password will not change" "n"
    if [[ $? != 0 ]]; then
        if [[ $# == 0 ]]; then
            show_menu
        fi
        return 0
    fi
    /usr/local/x-ui/x-ui setting -reset
    echo -e "All panel settings have been reset to default."
    restart
}

check_config() {
    local info=$(/usr/local/x-ui/x-ui setting -show true)
    if [[ $? != 0 ]]; then
        LOGE "get current settings error, please check logs"
        show_menu
        return
    fi
    LOGI "${info}"

    local existing_webBasePath=$(echo "$info" | grep -Eo 'webBasePath: .+' | awk '{print $2}')
    local existing_port=$(echo "$info" | grep -Eo 'port: .+' | awk '{print $2}')
    local existing_cert=$(/usr/local/x-ui/x-ui setting -getCert true | grep -Eo 'cert: .+' | awk '{print $2}')
    local server_ip=$(curl -s https://api.ipify.org)

    if [[ -n "$existing_cert" ]]; then
        local cert_host=$(basename "$(dirname "$existing_cert")")
        local formatted_cert_host=$(format_host_for_url "$cert_host")

        if [[ -n "$cert_host" ]]; then
            echo -e "${green}Access URL: https://${formatted_cert_host}:${existing_port}${existing_webBasePath}${plain}"
        else
            echo -e "${green}Access URL: https://${server_ip}:${existing_port}${existing_webBasePath}${plain}"
        fi
    else
        echo -e "${green}Access URL: http://${server_ip}:${existing_port}${existing_webBasePath}${plain}"
    fi
}

set_port() {
    echo && echo -n -e "Enter port number[1-65535]: " && read port
    if [[ -z "${port}" ]]; then
        LOGD "Cancelled"
        before_show_menu
    else
        /usr/local/x-ui/x-ui setting -port ${port}
        echo -e "The port is set, Please restart the panel now, and use the new port ${green}${port}${plain} to access web panel"
        confirm_restart
    fi
}

start() {
    check_status
    if [[ $? == 0 ]]; then
        echo ""
        LOGI "Panel is running, No need to start again, If you need to restart, please select restart"
    else
        systemctl start x-ui
        sleep 2
        check_status
        if [[ $? == 0 ]]; then
            LOGI "x-ui Started Successfully"
        else
            LOGE "panel Failed to start, Probably because it takes longer than two seconds to start, Please check the log information later"
        fi
    fi

    if [[ $# == 0 ]]; then
        before_show_menu
    fi
}

stop() {
    check_status
    if [[ $? == 1 ]]; then
        echo ""
        LOGI "Panel stopped, No need to stop again!"
    else
        systemctl stop x-ui
        sleep 2
        check_status
        if [[ $? == 1 ]]; then
            LOGI "x-ui and xray stopped successfully"
        else
            LOGE "Panel stop failed, Probably because the stop time exceeds two seconds, Please check the log information later"
        fi
    fi

    if [[ $# == 0 ]]; then
        before_show_menu
    fi
}

restart() {
    systemctl restart x-ui
    sleep 2
    check_status
    if [[ $? == 0 ]]; then
        LOGI "x-ui and xray Restarted successfully"
    else
        LOGE "Panel restart failed, Probably because it takes longer than two seconds to start, Please check the log information later"
    fi
    if [[ $# == 0 ]]; then
        before_show_menu
    fi
}

status() {
    systemctl status x-ui -l
    if [[ $# == 0 ]]; then
        before_show_menu
    fi
}

enable() {
    systemctl enable x-ui
    if [[ $? == 0 ]]; then
        LOGI "x-ui Set to boot automatically on startup successfully"
    else
        LOGE "x-ui Failed to set Autostart"
    fi

    if [[ $# == 0 ]]; then
        before_show_menu
    fi
}

disable() {
    systemctl disable x-ui
    if [[ $? == 0 ]]; then
        LOGI "x-ui Autostart Cancelled successfully"
    else
        LOGE "x-ui Failed to cancel autostart"
    fi

    if [[ $# == 0 ]]; then
        before_show_menu
    fi
}

show_log() {
    echo -e "${green}\t1.${plain} Debug Log"
    echo -e "${green}\t2.${plain} Clear All logs"
    echo -e "${green}\t0.${plain} Back to Main Menu"
    read -p "Choose an option: " choice

    case "$choice" in
    0)
        show_menu
        ;;
    1)
        journalctl -u x-ui -e --no-pager -f -p debug
        if [[ $# == 0 ]]; then
        before_show_menu
        fi
        ;;
    2)
        sudo journalctl --rotate
        sudo journalctl --vacuum-time=1s
        echo "All Logs cleared."
        restart
        ;;
    *)
        echo -e "${red}Invalid option. Please select a valid number.${plain}\n"
        show_log
        ;;
    esac
}

show_banlog() {
    local system_log="/var/log/fail2ban.log"
    
    echo -e "${green}Checking ban logs...${plain}\n"
    
    if ! systemctl is-active --quiet fail2ban; then
        echo -e "${red}Fail2ban service is not running!${plain}\n"
        return 1
    fi

    if [[ -f "$system_log" ]]; then
        echo -e "${green}Recent system ban activities from fail2ban.log:${plain}"
        grep "3x-ipl" "$system_log" | grep -E "Ban|Unban" | tail -n 10 || echo -e "${yellow}No recent system ban activities found${plain}"
        echo ""
    fi

    if [[ -f "${iplimit_banned_log_path}" ]]; then
        echo -e "${green}3X-IPL ban log entries:${plain}"
        if [[ -s "${iplimit_banned_log_path}" ]]; then
            grep -v "INIT" "${iplimit_banned_log_path}" | tail -n 10 || echo -e "${yellow}No ban entries found${plain}"
        else
            echo -e "${yellow}Ban log file is empty${plain}"
        fi
    else
        echo -e "${red}Ban log file not found at: ${iplimit_banned_log_path}${plain}"
    fi

    echo -e "\n${green}Current jail status:${plain}"
    fail2ban-client status 3x-ipl || echo -e "${yellow}Unable to get jail status${plain}"
}

bbr_menu() {
    echo -e "${green}\t1.${plain} Enable BBR"
    echo -e "${green}\t2.${plain} Disable BBR"
    echo -e "${green}\t0.${plain} Back to Main Menu"
    read -p "Choose an option: " choice
    case "$choice" in
    0)
        show_menu
        ;;
    1)
        enable_bbr
        bbr_menu
        ;;
    2)
        disable_bbr
        bbr_menu
        ;;
    *) 
        echo -e "${red}Invalid option. Please select a valid number.${plain}\n"
        bbr_menu
        ;;
    esac
}

disable_bbr() {

    if ! grep -q "net.core.default_qdisc=fq" /etc/sysctl.conf || ! grep -q "net.ipv4.tcp_congestion_control=bbr" /etc/sysctl.conf; then
        echo -e "${yellow}BBR is not currently enabled.${plain}"
        before_show_menu
    fi

    # Replace BBR with CUBIC configurations
    sed -i 's/net.core.default_qdisc=fq/net.core.default_qdisc=pfifo_fast/' /etc/sysctl.conf
    sed -i 's/net.ipv4.tcp_congestion_control=bbr/net.ipv4.tcp_congestion_control=cubic/' /etc/sysctl.conf

    # Apply changes
    sysctl -p

    # Verify that BBR is replaced with CUBIC
    if [[ $(sysctl net.ipv4.tcp_congestion_control | awk '{print $3}') == "cubic" ]]; then
        echo -e "${green}BBR has been replaced with CUBIC successfully.${plain}"
    else
        echo -e "${red}Failed to replace BBR with CUBIC. Please check your system configuration.${plain}"
    fi
}

enable_bbr() {
    if grep -q "net.core.default_qdisc=fq" /etc/sysctl.conf && grep -q "net.ipv4.tcp_congestion_control=bbr" /etc/sysctl.conf; then
        echo -e "${green}BBR is already enabled!${plain}"
        before_show_menu
    fi

    # Check the OS and install necessary packages
    case "${release}" in
    ubuntu | debian | armbian)
        apt-get update && apt-get install -y ca-certificates
        ;;
    centos | rhel | almalinux | rocky | ol)
        yum -y update && yum install -y ca-certificates
        ;;
    fedora | amzn)
        dnf -y update && dnf install -y ca-certificates
        ;;
    arch | manjaro | parch)
        pacman -Sy --noconfirm ca-certificates
        ;;
    opensuse* | suse)
        zypper refresh && zypper install -y ca-certificates
        ;;
    alpine)
        apk update && apk add ca-certificates
        ;;
    gentoo)
        emerge --sync && emerge --ask --quiet ca-certificates
        ;;
    void)
        xbps-install -S && xbps-install -y ca-certificates
        ;;
    solus)
        eopkg update && eopkg install -y ca-certificates
        ;;
    *)
        echo -e "${red}Unsupported operating system. Please install ca-certificates manually.${plain}\n"
        exit 1
        ;;
    esac

    # Enable BBR
    echo "net.core.default_qdisc=fq" | tee -a /etc/sysctl.conf
    echo "net.ipv4.tcp_congestion_control=bbr" | tee -a /etc/sysctl.conf

    # Apply changes
    sysctl -p

    # Verify that BBR is enabled
    if [[ $(sysctl net.ipv4.tcp_congestion_control | awk '{print $3}') == "bbr" ]]; then
        echo -e "${green}BBR has been enabled successfully.${plain}"
    else
        echo -e "${red}Failed to enable BBR. Please check your system configuration.${plain}"
    fi
}

update_shell() {
    wget -O /usr/bin/x-ui -N --no-check-certificate https://github.com/AghayeCoder/tx-ui/raw/main/x-ui.sh
    if [[ $? != 0 ]]; then
        echo ""
        LOGE "Failed to download script, Please check whether the machine can connect Github"
        before_show_menu
    else
        chmod +x /usr/bin/x-ui
        LOGI "Upgrade script succeeded, Please rerun the script" 
        before_show_menu
    fi
}

# 0: running, 1: not running, 2: not installed
check_status() {
    if [[ ! -f /etc/systemd/system/x-ui.service ]]; then
        return 2
    fi
    temp=$(systemctl status x-ui | grep Active | awk '{print $3}' | cut -d "(" -f2 | cut -d ")" -f1)
    if [[ "${temp}" == "running" ]]; then
        return 0
    else
        return 1
    fi
}

check_enabled() {
    temp=$(systemctl is-enabled x-ui)
    if [[ "${temp}" == "enabled" ]]; then
        return 0
    else
        return 1
    fi
}

check_uninstall() {
    check_status
    if [[ $? != 2 ]]; then
        echo ""
        LOGE "Panel installed, Please do not reinstall"
        if [[ $# == 0 ]]; then
            before_show_menu
        fi
        return 1
    else
        return 0
    fi
}

check_install() {
    check_status
    if [[ $? == 2 ]]; then
        echo ""
        LOGE "Please install the panel first"
        if [[ $# == 0 ]]; then
            before_show_menu
        fi
        return 1
    else
        return 0
    fi
}

show_status() {
    check_status
    case $? in
    0)
        echo -e "Panel state: ${green}Running${plain}"
        show_enable_status
        ;;
    1)
        echo -e "Panel state: ${yellow}Not Running${plain}"
        show_enable_status
        ;;
    2)
        echo -e "Panel state: ${red}Not Installed${plain}"
        ;;
    esac
    show_xray_status
}

show_enable_status() {
    check_enabled
    if [[ $? == 0 ]]; then
        echo -e "Start automatically: ${green}Yes${plain}"
    else
        echo -e "Start automatically: ${red}No${plain}"
    fi
}

check_xray_status() {
    count=$(ps -ef | grep "xray-linux" | grep -v "grep" | wc -l)
    if [[ count -ne 0 ]]; then
        return 0
    else
        return 1
    fi
}

show_xray_status() {
    check_xray_status
    if [[ $? == 0 ]]; then
        echo -e "xray state: ${green}Running${plain}"
    else
        echo -e "xray state: ${red}Not Running${plain}"
    fi
}

firewall_menu() {
    echo -e "${green}\t1.${plain} ${green}Install${plain} Firewall"
    echo -e "${green}\t2.${plain} Port List [numbered]"
    echo -e "${green}\t3.${plain} ${green}Open${plain} Ports"
    echo -e "${green}\t4.${plain} ${red}Delete${plain} Ports from List"
    echo -e "${green}\t5.${plain} ${green}Enable${plain} Firewall"
    echo -e "${green}\t6.${plain} ${red}Disable${plain} Firewall"
    echo -e "${green}\t7.${plain} Firewall Status"
    echo -e "${green}\t0.${plain} Back to Main Menu"
    read -p "Choose an option: " choice
    case "$choice" in
    0)
        show_menu
        ;;
    1)
        install_firewall
        firewall_menu
        ;;
    2)
        ufw status numbered
        firewall_menu
        ;;
    3)
        open_ports
        firewall_menu
        ;;
    4)
        delete_ports
        firewall_menu
        ;;
    5)
        ufw enable
        firewall_menu
        ;;
    6)
        ufw disable
        firewall_menu
        ;;
    7)
        ufw status verbose
        firewall_menu
        ;;
    *) 
        echo -e "${red}Invalid option. Please select a valid number.${plain}\n"
        firewall_menu
        ;;
    esac
}

install_firewall() {
    if ! command -v ufw &>/dev/null; then
        echo "ufw firewall is not installed. Installing now..."
        apt-get update
        apt-get install -y ufw
    else
        echo "ufw firewall is already installed"
    fi

    # Check if the firewall is inactive
    if ufw status | grep -q "Status: active"; then
        echo "Firewall is already active"
    else
        echo "Activating firewall..."
        # Open the necessary ports
        ufw allow ssh
        ufw allow http
        ufw allow https
        ufw allow 2053/tcp #webPort
        ufw allow 2096/tcp #subport

        # Enable the firewall
        ufw --force enable
    fi
}

open_ports() {
    # Prompt the user to enter the ports they want to open
    read -p "Enter the ports you want to open (e.g. 80,443,2053 or range 400-500): " ports

    # Check if the input is valid
    if ! [[ $ports =~ ^([0-9]+|[0-9]+-[0-9]+)(,([0-9]+|[0-9]+-[0-9]+))*$ ]]; then
        echo "Error: Invalid input. Please enter a comma-separated list of ports or a range of ports (e.g. 80,443,2053 or 400-500)." >&2
        exit 1
    fi

    # Open the specified ports using ufw
    IFS=',' read -ra PORT_LIST <<<"$ports"
    for port in "${PORT_LIST[@]}"; do
        if [[ $port == *-* ]]; then
            # Split the range into start and end ports
            start_port=$(echo $port | cut -d'-' -f1)
            end_port=$(echo $port | cut -d'-' -f2)
            # Open the port range
            ufw allow $start_port:$end_port/tcp
            ufw allow $start_port:$end_port/udp
        else
            # Open the single port
            ufw allow "$port"
        fi
    done

    # Confirm that the ports are opened
    echo "Opened the specified ports:"
    for port in "${PORT_LIST[@]}"; do
        if [[ $port == *-* ]]; then
            start_port=$(echo $port | cut -d'-' -f1)
            end_port=$(echo $port | cut -d'-' -f2)
            # Check if the port range has been successfully opened
            (ufw status | grep -q "$start_port:$end_port") && echo "$start_port-$end_port"
        else
            # Check if the individual port has been successfully opened
            (ufw status | grep -q "$port") && echo "$port"
        fi
    done
}

delete_ports() {
    # Display current rules with numbers
    echo "Current UFW rules:"
    ufw status numbered

    # Ask the user how they want to delete rules
    echo "Do you want to delete rules by:"
    echo "1) Rule numbers"
    echo "2) Ports"
    read -p "Enter your choice (1 or 2): " choice

    if [[ $choice -eq 1 ]]; then
        # Deleting by rule numbers
        read -p "Enter the rule numbers you want to delete (1, 2, etc.): " rule_numbers

        # Validate the input
        if ! [[ $rule_numbers =~ ^([0-9]+)(,[0-9]+)*$ ]]; then
            echo "Error: Invalid input. Please enter a comma-separated list of rule numbers." >&2
            exit 1
        fi

        # Split numbers into an array
        IFS=',' read -ra RULE_NUMBERS <<<"$rule_numbers"
        for rule_number in "${RULE_NUMBERS[@]}"; do
            # Delete the rule by number
            ufw delete "$rule_number" || echo "Failed to delete rule number $rule_number"
        done

        echo "Selected rules have been deleted."

    elif [[ $choice -eq 2 ]]; then
        # Deleting by ports
        read -p "Enter the ports you want to delete (e.g. 80,443,2053 or range 400-500): " ports

        # Validate the input
        if ! [[ $ports =~ ^([0-9]+|[0-9]+-[0-9]+)(,([0-9]+|[0-9]+-[0-9]+))*$ ]]; then
            echo "Error: Invalid input. Please enter a comma-separated list of ports or a range of ports (e.g. 80,443,2053 or 400-500)." >&2
            exit 1
        fi

        # Split ports into an array
        IFS=',' read -ra PORT_LIST <<<"$ports"
        for port in "${PORT_LIST[@]}"; do
            if [[ $port == *-* ]]; then
                # Split the port range
                start_port=$(echo $port | cut -d'-' -f1)
                end_port=$(echo $port | cut -d'-' -f2)
                # Delete the port range
                ufw delete allow $start_port:$end_port/tcp
                ufw delete allow $start_port:$end_port/udp
            else
                # Delete a single port
                ufw delete allow "$port"
            fi
        done

        # Confirmation of deletion
        echo "Deleted the specified ports:"
        for port in "${PORT_LIST[@]}"; do
            if [[ $port == *-* ]]; then
                start_port=$(echo $port | cut -d'-' -f1)
                end_port=$(echo $port | cut -d'-' -f2)
                # Check if the port range has been deleted
                (ufw status | grep -q "$start_port:$end_port") || echo "$start_port-$end_port"
            else
                # Check if the individual port has been deleted
                (ufw status | grep -q "$port") || echo "$port"
            fi
        done
    else
        echo "${red}Error:${plain} Invalid choice. Please enter 1 or 2." >&2
        exit 1
    fi
}


update_geo() {
    echo -e "${green}\t1.${plain} Loyalsoldier (geoip.dat, geosite.dat)"
    echo -e "${green}\t2.${plain} chocolate4u (geoip_IR.dat, geosite_IR.dat)"
    echo -e "${green}\t3.${plain} runetfreedom (geoip_RU.dat, geosite_RU.dat)"
    echo -e "${green}\t0.${plain} Back to Main Menu"
    read -p "Choose an option: " choice

    cd /usr/local/x-ui/bin

    case "$choice" in
    0)
        show_menu
        ;;
    1)
        systemctl stop x-ui
        rm -f geoip.dat geosite.dat
        wget -N https://github.com/Loyalsoldier/v2ray-rules-dat/releases/latest/download/geoip.dat
        wget -N https://github.com/Loyalsoldier/v2ray-rules-dat/releases/latest/download/geosite.dat
        echo -e "${green}Loyalsoldier datasets have been updated successfully!${plain}"
        restart
        ;;
    2)
        systemctl stop x-ui
        rm -f geoip_IR.dat geosite_IR.dat
        wget -O geoip_IR.dat -N https://github.com/chocolate4u/Iran-v2ray-rules/releases/latest/download/geoip.dat
        wget -O geosite_IR.dat -N https://github.com/chocolate4u/Iran-v2ray-rules/releases/latest/download/geosite.dat
        echo -e "${green}chocolate4u datasets have been updated successfully!${plain}"
        restart
        ;;
    3)
        systemctl stop x-ui
        rm -f geoip_RU.dat geosite_RU.dat
        wget -O geoip_RU.dat -N https://github.com/runetfreedom/russia-v2ray-rules-dat/releases/latest/download/geoip.dat
        wget -O geosite_RU.dat -N https://github.com/runetfreedom/russia-v2ray-rules-dat/releases/latest/download/geosite.dat
        echo -e "${green}runetfreedom datasets have been updated successfully!${plain}"
        restart
        ;;
    *)
        echo -e "${red}Invalid option. Please select a valid number.${plain}\n"
        update_geo
        ;;
    esac

    before_show_menu
}

install_acme() {
    # Check if acme.sh is already installed
    if command -v ~/.acme.sh/acme.sh &>/dev/null; then
        LOGI "acme.sh is already installed."
        return 0
    fi

    LOGI "Installing acme.sh..."
    cd ~ || return 1 # Ensure you can change to the home directory

    curl -s https://get.acme.sh | sh
    if [ $? -ne 0 ]; then
        LOGE "Installation of acme.sh failed."
        return 1
    else
        LOGI "Installation of acme.sh succeeded."
    fi

    return 0
}

ssl_cert_issue_main() {
    echo -e "${green}\t1.${plain} Get SSL"
    echo -e "${green}\t2.${plain} Revoke"
    echo -e "${green}\t3.${plain} Force Renew"
    echo -e "${green}\t4.${plain} Show Existing Domains"
    echo -e "${green}\t5.${plain} Set Cert paths for the panel"
    echo -e "${green}\t0.${plain} Back to Main Menu"

    read -p "Choose an option: " choice
    case "$choice" in
    0)
        show_menu
        ;;
    1)
        ssl_cert_issue
        ssl_cert_issue_main
        ;;
    2)
        local domains=$(find /root/cert/ -mindepth 1 -maxdepth 1 -type d -exec basename {} \;)
        if [ -z "$domains" ]; then
            echo "No certificates found to revoke."
        else
            echo "Existing domains:"
            echo "$domains"
            read -p "Please enter a domain from the list to revoke the certificate: " domain
            if echo "$domains" | grep -qw "$domain"; then
                ~/.acme.sh/acme.sh --revoke -d ${domain}
                LOGI "Certificate revoked for domain: $domain"
            else
                echo "Invalid domain entered."
            fi
        fi
        ssl_cert_issue_main
        ;;
    3)
        local domains=$(find /root/cert/ -mindepth 1 -maxdepth 1 -type d -exec basename {} \;)
        if [ -z "$domains" ]; then
            echo "No certificates found to renew."
        else
            echo "Existing domains:"
            echo "$domains"
            read -p "Please enter a domain from the list to renew the SSL certificate: " domain
            if echo "$domains" | grep -qw "$domain"; then
                ~/.acme.sh/acme.sh --renew -d ${domain} --force
                LOGI "Certificate forcefully renewed for domain: $domain"
            else
                echo "Invalid domain entered."
            fi
        fi
        ssl_cert_issue_main
        ;;
    4)
        local domains=$(find /root/cert/ -mindepth 1 -maxdepth 1 -type d -exec basename {} \;)
        if [ -z "$domains" ]; then
            echo "No certificates found."
        else
            echo "Existing domains and their paths:"
            for domain in $domains; do
                local cert_path="/root/cert/${domain}/fullchain.pem"
                local key_path="/root/cert/${domain}/privkey.pem"
                if [[ -f "${cert_path}" && -f "${key_path}" ]]; then
                    echo -e "Domain: ${domain}"
                    echo -e "\tCertificate Path: ${cert_path}"
                    echo -e "\tPrivate Key Path: ${key_path}"
                else
                    echo -e "Domain: ${domain} - Certificate or Key missing."
                fi
            done
        fi
        ssl_cert_issue_main
        ;;
    5)
        local domains=$(find /root/cert/ -mindepth 1 -maxdepth 1 -type d -exec basename {} \;)
        if [ -z "$domains" ]; then
            echo "No certificates found."
        else
            echo "Available domains:"
            echo "$domains"
            read -p "Please choose a domain to set the panel paths: " domain

            if echo "$domains" | grep -qw "$domain"; then
                local webCertFile="/root/cert/${domain}/fullchain.pem"
                local webKeyFile="/root/cert/${domain}/privkey.pem"

                if [[ -f "${webCertFile}" && -f "${webKeyFile}" ]]; then
                    /usr/local/x-ui/x-ui cert -webCert "$webCertFile" -webCertKey "$webKeyFile"
                    echo "Panel paths set for domain: $domain"
                    echo "  - Certificate File: $webCertFile"
                    echo "  - Private Key File: $webKeyFile"
                    restart
                else
                    echo "Certificate or private key not found for domain: $domain."
                fi
            else
                echo "Invalid domain entered."
            fi
        fi
        ssl_cert_issue_main
        ;;

    *)
        echo -e "${red}Invalid option. Please select a valid number.${plain}\n"
        ssl_cert_issue_main
        ;;
    esac
}

ssl_cert_issue() {
    local existing_webBasePath=$(/usr/local/x-ui/x-ui setting -show true | grep -Eo 'webBasePath: .+' | awk '{print $2}')
    local existing_port=$(/usr/local/x-ui/x-ui setting -show true | grep -Eo 'port: .+' | awk '{print $2}')
    # check for acme.sh first
    if ! command -v ~/.acme.sh/acme.sh &>/dev/null; then
        echo "acme.sh could not be found. we will install it"
        install_acme
        if [ $? -ne 0 ]; then
            LOGE "install acme failed, please check logs"
            exit 1
        fi
    fi

    # install socat second
    case "${release}" in
        ubuntu | debian | armbian)
            apt update && apt install -y socat
            ;;
        centos | rhel | almalinux | rocky | ol)
            yum -y update && yum install -y socat
            ;;
        fedora | amzn)
            dnf -y update && dnf install -y socat
            ;;
        arch | manjaro | parch)
            pacman -Sy --noconfirm socat
            ;;
        opensuse* | suse)
            zypper refresh && zypper install -y socat
            ;;
        alpine)
            apk update && apk add socat
            ;;
        gentoo)
            emerge --sync && emerge --ask --quiet socat
            ;;
        void)
            xbps-install -S && xbps-install -y socat
            ;;
        solus)
            eopkg update && eopkg install -y socat
            ;;
        *)
            echo -e "${red}Unsupported operating system. Please install socat manually.${plain}\n"
            exit 1
            ;;
    esac
    if [ $? -ne 0 ]; then
        LOGE "install socat failed, please check logs"
        exit 1
    else
        LOGI "install socat succeed..."
    fi

    # get the certificate target here, and we need to verify it
    local domain=""
    read -p "Please enter your domain name or IP address: " domain
    if [[ -z "$domain" ]]; then
        LOGE "Domain/IP cannot be empty."
        exit 1
    fi
    local target_type="domain"
    if is_ip_address "$domain"; then
        target_type="ip"
    fi
    LOGD "Your certificate target is: ${domain}, checking it as an ${target_type}..."

    # check if there already exists a certificate
    local currentCert=$(~/.acme.sh/acme.sh --list | awk 'NR > 1 {print $1}' | grep -Fx -- "${domain}")
    if [[ -n "${currentCert}" ]]; then
        local certInfo=$(~/.acme.sh/acme.sh --list)
        LOGE "System already has a certificate for this domain/IP. Cannot issue again. Current certificate details:"
        LOGI "$certInfo"
        exit 1
    else
        LOGI "Your domain/IP is ready for issuing certificates now..."
    fi

    # create a directory for the certificate
    certPath="/root/cert/${domain}"
    if [ ! -d "$certPath" ]; then
        mkdir -p "$certPath"
    else
        rm -rf "$certPath"
        mkdir -p "$certPath"
    fi

    # get the port number for the standalone server
    local WebPort=80
    read -p "Please choose which port to use (default is 80): " WebPort
    if [[ ${WebPort} -gt 65535 || ${WebPort} -lt 1 ]]; then
        LOGE "Your input ${WebPort} is invalid, will use default port 80."
        WebPort=80
    fi
    LOGI "Will use port: ${WebPort} to issue certificates. Please make sure this port is open."

    # issue the certificate
    ~/.acme.sh/acme.sh --set-default-ca --server letsencrypt
    if is_ip_address "$domain"; then
        LOGI "Issuing an IP certificate with acme.sh short-lived profile..."
        ~/.acme.sh/acme.sh --issue -d ${domain} --standalone --server letsencrypt --certificate-profile shortlived --days 6 --httpport ${WebPort} --force
    else
        LOGI "Issuing a domain certificate with acme.sh standalone mode..."
        ~/.acme.sh/acme.sh --issue -d ${domain} --listen-v6 --standalone --httpport ${WebPort}
    fi
    if [ $? -ne 0 ]; then
        LOGE "Issuing certificate failed, please check logs."
        rm -rf ~/.acme.sh/${domain}
        exit 1
    else
        LOGE "Issuing certificate succeeded, installing certificates..."
    fi

    # install the certificate
    ~/.acme.sh/acme.sh --installcert -d ${domain} \
        --key-file /root/cert/${domain}/privkey.pem \
        --fullchain-file /root/cert/${domain}/fullchain.pem

    if [ $? -ne 0 ]; then
        LOGE "Installing certificate failed, exiting."
        rm -rf ~/.acme.sh/${domain}
        exit 1
    else
        LOGI "Installing certificate succeeded, enabling auto renew..."
    fi

    # enable auto-renew
    ~/.acme.sh/acme.sh --upgrade --auto-upgrade
    if [ $? -ne 0 ]; then
        LOGE "Auto renew failed, certificate details:"
        ls -lah cert/*
        chmod 755 $certPath/*
        exit 1
    else
        LOGI "Auto renew succeeded, certificate details:"
        ls -lah cert/*
        chmod 755 $certPath/*
    fi

    # Prompt user to set panel paths after successful certificate installation
    read -p "Would you like to set this certificate for the panel? (y/n): " setPanel
    if [[ "$setPanel" == "y" || "$setPanel" == "Y" ]]; then
        local webCertFile="/root/cert/${domain}/fullchain.pem"
        local webKeyFile="/root/cert/${domain}/privkey.pem"

        if [[ -f "$webCertFile" && -f "$webKeyFile" ]]; then
            /usr/local/x-ui/x-ui cert -webCert "$webCertFile" -webCertKey "$webKeyFile"
            LOGI "Panel paths set for domain/IP: $domain"
            LOGI "  - Certificate File: $webCertFile"
            LOGI "  - Private Key File: $webKeyFile"
            local formatted_domain=$(format_host_for_url "$domain")
            echo -e "${green}Access URL: https://${formatted_domain}:${existing_port}${existing_webBasePath}${plain}"
            restart
        else
            LOGE "Error: Certificate or private key file not found for domain/IP: $domain."
        fi
    else
        LOGI "Skipping panel path setting."
    fi
}

ssl_cert_issue_CF() {
    local existing_webBasePath=$(/usr/local/x-ui/x-ui setting -show true | grep -Eo 'webBasePath: .+' | awk '{print $2}')
    local existing_port=$(/usr/local/x-ui/x-ui setting -show true | grep -Eo 'port: .+' | awk '{print $2}')
    LOGI "****** Instructions for Use ******"
    LOGI "Follow the steps below to complete the process:"
    LOGI "1. Cloudflare Registered E-mail."
    LOGI "2. Cloudflare Global API Key."
    LOGI "3. The Domain Name."
    LOGI "4. Once the certificate is issued, you will be prompted to set the certificate for the panel (optional)."
    LOGI "5. The script also supports automatic renewal of the SSL certificate after installation."

    confirm "Do you confirm the information and wish to proceed? [y/n]" "y"

    if [ $? -eq 0 ]; then
        # Check for acme.sh first
        if ! command -v ~/.acme.sh/acme.sh &>/dev/null; then
            echo "acme.sh could not be found. We will install it."
            install_acme
            if [ $? -ne 0 ]; then
                LOGE "Install acme failed, please check logs."
                exit 1
            fi
        fi

        CF_Domain=""
        certPath="/root/cert-CF"
        if [ ! -d "$certPath" ]; then
            mkdir -p $certPath
        else
            rm -rf $certPath
            mkdir -p $certPath
        fi

        LOGD "Please set a domain name:"
        read -p "Input your domain here: " CF_Domain
        LOGD "Your domain name is set to: ${CF_Domain}"

        # Set up Cloudflare API details
        CF_GlobalKey=""
        CF_AccountEmail=""
        LOGD "Please set the API key:"
        read -p "Input your key here: " CF_GlobalKey
        LOGD "Your API key is: ${CF_GlobalKey}"

        LOGD "Please set up registered email:"
        read -p "Input your email here: " CF_AccountEmail
        LOGD "Your registered email address is: ${CF_AccountEmail}"

        # Set the default CA to Let's Encrypt
        ~/.acme.sh/acme.sh --set-default-ca --server letsencrypt
        if [ $? -ne 0 ]; then
            LOGE "Default CA, Let'sEncrypt fail, script exiting..."
            exit 1
        fi

        export CF_Key="${CF_GlobalKey}"
        export CF_Email="${CF_AccountEmail}"

        # Issue the certificate using Cloudflare DNS
        ~/.acme.sh/acme.sh --issue --dns dns_cf -d ${CF_Domain} -d *.${CF_Domain} --log
        if [ $? -ne 0 ]; then
            LOGE "Certificate issuance failed, script exiting..."
            exit 1
        else
            LOGI "Certificate issued successfully, Installing..."
        fi

        # Install the certificate
        mkdir -p ${certPath}/${CF_Domain}
        if [ $? -ne 0 ]; then
            LOGE "Failed to create directory: ${certPath}/${CF_Domain}"
            exit 1
        fi

        ~/.acme.sh/acme.sh --installcert -d ${CF_Domain} -d *.${CF_Domain} \
            --fullchain-file ${certPath}/${CF_Domain}/fullchain.pem \
            --key-file ${certPath}/${CF_Domain}/privkey.pem

        if [ $? -ne 0 ]; then
            LOGE "Certificate installation failed, script exiting..."
            exit 1
        else
            LOGI "Certificate installed successfully, Turning on automatic updates..."
        fi

        # Enable auto-update
        ~/.acme.sh/acme.sh --upgrade --auto-upgrade
        if [ $? -ne 0 ]; then
            LOGE "Auto update setup failed, script exiting..."
            exit 1
        else
            LOGI "The certificate is installed and auto-renewal is turned on. Specific information is as follows:"
            ls -lah ${certPath}/${CF_Domain}
            chmod 755 ${certPath}/${CF_Domain}
        fi

        # Prompt user to set panel paths after successful certificate installation
        read -p "Would you like to set this certificate for the panel? (y/n): " setPanel
        if [[ "$setPanel" == "y" || "$setPanel" == "Y" ]]; then
            local webCertFile="${certPath}/${CF_Domain}/fullchain.pem"
            local webKeyFile="${certPath}/${CF_Domain}/privkey.pem"

            if [[ -f "$webCertFile" && -f "$webKeyFile" ]]; then
                /usr/local/x-ui/x-ui cert -webCert "$webCertFile" -webCertKey "$webKeyFile"
                LOGI "Panel paths set for domain: $CF_Domain"
                LOGI "  - Certificate File: $webCertFile"
                LOGI "  - Private Key File: $webKeyFile"
                echo -e "${green}Access URL: https://${CF_Domain}:${existing_port}${existing_webBasePath}${plain}"
                restart
            else
                LOGE "Error: Certificate or private key file not found for domain: $CF_Domain."
            fi
        else
            LOGI "Skipping panel path setting."
        fi
    else
        show_menu
    fi
}

run_speedtest() {
    # Check if Speedtest is already installed
    if ! command -v speedtest &>/dev/null; then
        # If not installed, determine installation method
        if command -v snap &>/dev/null; then
            # Use snap to install Speedtest
            echo "Installing Speedtest using snap..."
            snap install speedtest
        else
            # Fallback to using package managers
            local pkg_manager=""
            local speedtest_install_script=""

            if command -v dnf &>/dev/null; then
                pkg_manager="dnf"
                speedtest_install_script="https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.rpm.sh"
            elif command -v yum &>/dev/null; then
                pkg_manager="yum"
                speedtest_install_script="https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.rpm.sh"
            elif command -v apt-get &>/dev/null; then
                pkg_manager="apt-get"
                speedtest_install_script="https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.deb.sh"
            elif command -v apt &>/dev/null; then
                pkg_manager="apt"
                speedtest_install_script="https://packagecloud.io/install/repositories/ookla/speedtest-cli/script.deb.sh"
            fi

            if [[ -z $pkg_manager ]]; then
                echo "Error: Package manager not found. You may need to install Speedtest manually."
                return 1
            else
                echo "Installing Speedtest using $pkg_manager..."
                curl -s $speedtest_install_script | bash
                $pkg_manager install -y speedtest
            fi
        fi
    fi

    speedtest
}

create_iplimit_jails() {
    # Use default bantime if not passed => 30 minutes
    local bantime="${1:-30}"

    # Uncomment 'allowipv6 = auto' in fail2ban.conf
    sed -i 's/#allowipv6 = auto/allowipv6 = auto/g' /etc/fail2ban/fail2ban.conf

    # On Debian 12+ fail2ban's default backend should be changed to systemd
    if [[  "${release}" == "debian" && ${os_version} -ge 12 ]]; then
        sed -i '0,/action =/s/backend = auto/backend = systemd/' /etc/fail2ban/jail.conf
    fi

    cat << EOF > /etc/fail2ban/jail.d/3x-ipl.conf
[3x-ipl]
enabled=true
backend=auto
filter=3x-ipl
action=3x-ipl
logpath=${iplimit_log_path}
maxretry=2
findtime=32
bantime=${bantime}m
EOF

    cat << EOF > /etc/fail2ban/filter.d/3x-ipl.conf
[Definition]
datepattern = ^%%Y/%%m/%%d %%H:%%M:%%S
failregex   = \[LIMIT_IP\]\s*Email\s*=\s*<F-USER>.+</F-USER>\s*\|\|\s*SRC\s*=\s*<ADDR>
ignoreregex =
EOF

    cat << EOF > /etc/fail2ban/action.d/3x-ipl.conf
[INCLUDES]
before = iptables-allports.conf

[Definition]
actionstart = <iptables> -N f2b-<name>
              <iptables> -A f2b-<name> -j <returntype>
              <iptables> -I <chain> -p <protocol> -j f2b-<name>

actionstop = <iptables> -D <chain> -p <protocol> -j f2b-<name>
             <actionflush>
             <iptables> -X f2b-<name>

actioncheck = <iptables> -n -L <chain> | grep -q 'f2b-<name>[ \t]'

actionban = <iptables> -I f2b-<name> 1 -s <ip> -j <blocktype>
            echo "\$(date +"%%Y/%%m/%%d %%H:%%M:%%S")   BAN   [Email] = <F-USER> [IP] = <ip> banned for <bantime> seconds." >> ${iplimit_banned_log_path}

actionunban = <iptables> -D f2b-<name> -s <ip> -j <blocktype>
              echo "\$(date +"%%Y/%%m/%%d %%H:%%M:%%S")   UNBAN   [Email] = <F-USER> [IP] = <ip> unbanned." >> ${iplimit_banned_log_path}

[Init]
name = default
protocol = tcp
chain = INPUT
EOF

    echo -e "${green}Ip Limit jail files created with a bantime of ${bantime} minutes.${plain}"
}

iplimit_remove_conflicts() {
    local jail_files=(
        /etc/fail2ban/jail.conf
        /etc/fail2ban/jail.local
    )

    for file in "${jail_files[@]}"; do
        # Check for [3x-ipl] config in jail file then remove it
        if test -f "${file}" && grep -qw '3x-ipl' ${file}; then
            sed -i "/\[3x-ipl\]/,/^$/d" ${file}
            echo -e "${yellow}Removing conflicts of [3x-ipl] in jail (${file})!${plain}\n"
        fi
    done
}

ip_validation() {
    ipv6_regex="^(([0-9a-fA-F]{1,4}:){7,7}[0-9a-fA-F]{1,4}|([0-9a-fA-F]{1,4}:){1,7}:|([0-9a-fA-F]{1,4}:){1,6}:[0-9a-fA-F]{1,4}|([0-9a-fA-F]{1,4}:){1,5}(:[0-9a-fA-F]{1,4}){1,2}|([0-9a-fA-F]{1,4}:){1,4}(:[0-9a-fA-F]{1,4}){1,3}|([0-9a-fA-F]{1,4}:){1,3}(:[0-9a-fA-F]{1,4}){1,4}|([0-9a-fA-F]{1,4}:){1,2}(:[0-9a-fA-F]{1,4}){1,5}|[0-9a-fA-F]{1,4}:((:[0-9a-fA-F]{1,4}){1,6})|:((:[0-9a-fA-F]{1,4}){1,7}|:)|fe80:(:[0-9a-fA-F]{0,4}){0,4}%[0-9a-zA-Z]{1,}|::(ffff(:0{1,4}){0,1}:){0,1}((25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9])\.){3,3}(25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9])|([0-9a-fA-F]{1,4}:){1,4}:((25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9])\.){3,3}(25[0-5]|(2[0-4]|1{0,1}[0-9]){0,1}[0-9]))$"
    ipv4_regex="^((25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[1-9][0-9]?|0)\.){3}(25[0-5]|2[0-4][0-9]|1[0-9][0-9]|[1-9][0-9]?|0)$"
}

iplimit_main() {
    echo -e "\n${green}\t1.${plain} Install Fail2ban and configure IP Limit"
    echo -e "${green}\t2.${plain} Change Ban Duration"
    echo -e "${green}\t3.${plain} Unban Everyone"
    echo -e "${green}\t4.${plain} Ban Logs"
    echo -e "${green}\t5.${plain} Ban an IP Address"
    echo -e "${green}\t6.${plain} Unban an IP Address"
    echo -e "${green}\t7.${plain} Real-Time Logs"
    echo -e "${green}\t8.${plain} Service Status"
    echo -e "${green}\t9.${plain} Service Restart"
    echo -e "${green}\t10.${plain} Uninstall Fail2ban and IP Limit"
    echo -e "${green}\t0.${plain} Back to Main Menu"
    read -p "Choose an option: " choice
    case "$choice" in
    0)
        show_menu
        ;;
    1)
        confirm "Proceed with installation of Fail2ban & IP Limit?" "y"
        if [[ $? == 0 ]]; then
            install_iplimit
        else
            iplimit_main
        fi
        ;;
    2)
        read -rp "Please enter new Ban Duration in Minutes [default 30]: " NUM
        if [[ $NUM =~ ^[0-9]+$ ]]; then
            create_iplimit_jails ${NUM}
            systemctl restart fail2ban
        else
            echo -e "${red}${NUM} is not a number! Please, try again.${plain}"
        fi
        iplimit_main
        ;;
    3)
        confirm "Proceed with Unbanning everyone from IP Limit jail?" "y"
        if [[ $? == 0 ]]; then
            fail2ban-client reload --restart --unban 3x-ipl
            truncate -s 0 "${iplimit_banned_log_path}"
            echo -e "${green}All users Unbanned successfully.${plain}"
            iplimit_main
        else
            echo -e "${yellow}Cancelled.${plain}"
        fi
        iplimit_main
        ;;
    4)
        show_banlog
        iplimit_main
        ;;
    5)
        read -rp "Enter the IP address you want to ban: " ban_ip
        ip_validation
        if [[ $ban_ip =~ $ipv4_regex || $ban_ip =~ $ipv6_regex ]]; then
            fail2ban-client set 3x-ipl banip "$ban_ip"
            echo -e "${green}IP Address ${ban_ip} has been banned successfully.${plain}"
        else
            echo -e "${red}Invalid IP address format! Please try again.${plain}"
        fi
        iplimit_main
        ;;
    6)
        read -rp "Enter the IP address you want to unban: " unban_ip
        ip_validation
        if [[ $unban_ip =~ $ipv4_regex || $unban_ip =~ $ipv6_regex ]]; then
            fail2ban-client set 3x-ipl unbanip "$unban_ip"
            echo -e "${green}IP Address ${unban_ip} has been unbanned successfully.${plain}"
        else
            echo -e "${red}Invalid IP address format! Please try again.${plain}"
        fi
        iplimit_main
        ;;
    7)
        tail -f /var/log/fail2ban.log
        iplimit_main
        ;;
    8)
        service fail2ban status
        iplimit_main
        ;;
    9)
        systemctl restart fail2ban
        iplimit_main
        ;;
    10)
        remove_iplimit
        iplimit_main
        ;;
    *)
        echo -e "${red}Invalid option. Please select a valid number.${plain}\n"
        iplimit_main
        ;;
    esac
}

install_iplimit() {
    if ! command -v fail2ban-client &>/dev/null; then
        echo -e "${green}Fail2ban is not installed. Installing now...!${plain}\n"
        case "${release}" in
            ubuntu | debian | armbian)
                apt update && apt install -y fail2ban
                ;;
            centos | rhel | almalinux | rocky | ol)
                yum update -y && yum install epel-release -y
                yum install -y fail2ban
                ;;
            fedora | amzn)
                dnf -y update && dnf install -y fail2ban
                ;;
            arch | manjaro | parch)
                pacman -Syu --noconfirm fail2ban
                ;;
            opensuse* | suse)
                zypper refresh && zypper install -y fail2ban
                ;;
            alpine)
                apk update && apk add fail2ban
                ;;
            gentoo)
                emerge --sync && emerge --ask --quiet fail2ban
                ;;
            void)
                xbps-install -S && xbps-install -y fail2ban
                ;;
            solus)
                eopkg update && eopkg install -y fail2ban
                ;;
            *)
                echo -e "${red}Unsupported operating system. Please install fail2ban manually.${plain}\n"
                exit 1
                ;;
        esac
        if ! command -v fail2ban-client &>/dev/null; then
            echo -e "${red}Fail2ban installation failed.${plain}\n"
            exit 1
        fi
        echo -e "${green}Fail2ban installed successfully!${plain}\n"
    else
        echo -e "${yellow}Fail2ban is already installed.${plain}\n"
    fi

    echo -e "${green}Configuring IP Limit...${plain}\n"

    # make sure there's no conflict for jail files
    iplimit_remove_conflicts

    # Check if log file exists
    if ! test -f "${iplimit_banned_log_path}"; then
        touch ${iplimit_banned_log_path}
    fi

    # Check if service log file exists so fail2ban won't return error
    if ! test -f "${iplimit_log_path}"; then
        touch ${iplimit_log_path}
    fi

    # Create the iplimit jail files
    # we didn't pass the bantime here to use the default value
    create_iplimit_jails

    # Launching fail2ban
    if ! systemctl is-active --quiet fail2ban; then
        systemctl start fail2ban
        systemctl enable fail2ban
    else
        systemctl restart fail2ban
    fi
    systemctl enable fail2ban

    echo -e "${green}IP Limit installed and configured successfully!${plain}\n"
    before_show_menu
}

remove_iplimit() {
    echo -e "${green}\t1.${plain} Only remove IP Limit configurations"
    echo -e "${green}\t2.${plain} Uninstall Fail2ban and IP Limit"
    echo -e "${green}\t0.${plain} Back to Main Menu"
    read -p "Choose an option: " num
    case "$num" in
        1)
            rm -f /etc/fail2ban/filter.d/3x-ipl.conf
            rm -f /etc/fail2ban/action.d/3x-ipl.conf
            rm -f /etc/fail2ban/jail.d/3x-ipl.conf
            systemctl restart fail2ban
            echo -e "${green}IP Limit removed successfully!${plain}\n"
            before_show_menu
            ;;
        2)
            rm -rf /etc/fail2ban
            systemctl stop fail2ban
            case "${release}" in
                ubuntu | debian | armbian)
                    apt-get remove -y fail2ban
                    apt-get purge -y fail2ban
                    apt-get autoremove -y
                    ;;
                centos | rhel | almalinux | rocky | ol)
                    yum remove -y fail2ban
                    yum autoremove -y
                    ;;
                fedora | amzn)
                    dnf remove -y fail2ban
                    dnf autoremove -y
                    ;;
                arch | manjaro | parch)
                    pacman -Rns --noconfirm fail2ban
                    ;;
                opensuse* | suse)
                    zypper remove -y fail2ban
                    ;;
                alpine)
                    apk del fail2ban
                    ;;
                gentoo)
                    emerge --deselect fail2ban
                    ;;
                void)
                    xbps-remove -y fail2ban
                    ;;
                solus)
                    eopkg remove -y fail2ban
                    ;;
                *)
                    echo -e "${red}Unsupported operating system. Please uninstall Fail2ban manually.${plain}\n"
                    exit 1
                    ;;
            esac
            echo -e "${green}Fail2ban and IP Limit removed successfully!${plain}\n"
            before_show_menu
            ;;
        0)
            show_menu
            ;;
        *)
            echo -e "${red}Invalid option. Please select a valid number.${plain}\n"
            remove_iplimit
            ;;
    esac
}

SSH_port_forwarding() {
    local server_ip=$(curl -s https://api.ipify.org)
    local existing_webBasePath=$(/usr/local/x-ui/x-ui setting -show true | grep -Eo 'webBasePath: .+' | awk '{print $2}')
    local existing_port=$(/usr/local/x-ui/x-ui setting -show true | grep -Eo 'port: .+' | awk '{print $2}')
    local existing_listenIP=$(/usr/local/x-ui/x-ui setting -getListen true | grep -Eo 'listenIP: .+' | awk '{print $2}')
    local existing_cert=$(/usr/local/x-ui/x-ui setting -getCert true | grep -Eo 'cert: .+' | awk '{print $2}')
    local existing_key=$(/usr/local/x-ui/x-ui setting -getCert true | grep -Eo 'key: .+' | awk '{print $2}')

    local config_listenIP=""
    local listen_choice=""

    if [[ -n "$existing_cert" && -n "$existing_key" ]]; then
        echo -e "${green}Panel is secure with SSL.${plain}"
        before_show_menu
    fi
    if [[ -z "$existing_cert" && -z "$existing_key" && (-z "$existing_listenIP" || "$existing_listenIP" == "0.0.0.0") ]]; then
        echo -e "\n${red}Warning: No Cert and Key found! The panel is not secure.${plain}"
        echo "Please obtain a certificate or set up SSH port forwarding."
    fi

    if [[ -n "$existing_listenIP" && "$existing_listenIP" != "0.0.0.0" && (-z "$existing_cert" && -z "$existing_key") ]]; then
        echo -e "\n${green}Current SSH Port Forwarding Configuration:${plain}"
        echo -e "Standard SSH command:"
        echo -e "${yellow}ssh -L 2222:${existing_listenIP}:${existing_port} root@${server_ip}${plain}"
        echo -e "\nIf using SSH key:"
        echo -e "${yellow}ssh -i <sshkeypath> -L 2222:${existing_listenIP}:${existing_port} root@${server_ip}${plain}"
        echo -e "\nAfter connecting, access the panel at:"
        echo -e "${yellow}http://localhost:2222${existing_webBasePath}${plain}"
    fi

    echo -e "\nChoose an option:"
    echo -e "${green}1.${plain} Set listen IP"
    echo -e "${green}2.${plain} Clear listen IP"
    echo -e "${green}0.${plain} Back to Main Menu"
    read -p "Choose an option: " num

    case "$num" in
    1)
        if [[ -z "$existing_listenIP" || "$existing_listenIP" == "0.0.0.0" ]]; then
            echo -e "\nNo listenIP configured. Choose an option:"
            echo -e "1. Use default IP (127.0.0.1)"
            echo -e "2. Set a custom IP"
            read -p "Select an option (1 or 2): " listen_choice

            config_listenIP="127.0.0.1"
            [[ "$listen_choice" == "2" ]] && read -p "Enter custom IP to listen on: " config_listenIP

            /usr/local/x-ui/x-ui setting -listenIP "${config_listenIP}" >/dev/null 2>&1
            echo -e "${green}listen IP has been set to ${config_listenIP}.${plain}"
            echo -e "\n${green}SSH Port Forwarding Configuration:${plain}"
            echo -e "Standard SSH command:"
            echo -e "${yellow}ssh -L 2222:${config_listenIP}:${existing_port} root@${server_ip}${plain}"
            echo -e "\nIf using SSH key:"
            echo -e "${yellow}ssh -i <sshkeypath> -L 2222:${config_listenIP}:${existing_port} root@${server_ip}${plain}"
            echo -e "\nAfter connecting, access the panel at:"
            echo -e "${yellow}http://localhost:2222${existing_webBasePath}${plain}"
            restart
        else
            config_listenIP="${existing_listenIP}"
            echo -e "${green}Current listen IP is already set to ${config_listenIP}.${plain}"
        fi
        ;;
    2)
        /usr/local/x-ui/x-ui setting -listenIP 0.0.0.0 >/dev/null 2>&1
        echo -e "${green}Listen IP has been cleared.${plain}"
        restart
        ;;
    0)
        show_menu
        ;;
    *)
        echo -e "${red}Invalid option. Please select a valid number.${plain}\n"
        SSH_port_forwarding
        ;;
    esac
}

show_usage() {
    echo -e "┌───────────────────────────────────────────────────────┐
│  ${blue}x-ui control menu usages (subcommands):${plain}              │
│                                                       │
│  ${blue}x-ui${plain}              - Admin Management Script          │
│  ${blue}x-ui start${plain}        - Start                            │
│  ${blue}x-ui stop${plain}         - Stop                             │
│  ${blue}x-ui restart${plain}      - Restart                          │
│  ${blue}x-ui status${plain}       - Current Status                   │
│  ${blue}x-ui settings${plain}     - Current Settings                 │
│  ${blue}x-ui enable${plain}       - Enable Autostart on OS Startup   │
│  ${blue}x-ui disable${plain}      - Disable Autostart on OS Startup  │
│  ${blue}x-ui log${plain}          - Check logs                       │
│  ${blue}x-ui banlog${plain}       - Check Fail2ban ban logs          │
│  ${blue}x-ui update${plain}       - Update                           │
│  ${blue}x-ui legacy${plain}       - legacy version                   │
│  ${blue}x-ui install${plain}      - Install                          │
│  ${blue}x-ui uninstall${plain}    - Uninstall                        │
└───────────────────────────────────────────────────────┘"
}

show_menu() {
    echo -e "
╔────────────────────────────────────────────────╗
│   ${green}TX-UI Panel Management Script${plain}                │
│   ${green}0.${plain} Exit Script                               │
│────────────────────────────────────────────────│
│   ${green}1.${plain} Install                                   │
│   ${green}2.${plain} Update                                    │
│   ${green}3.${plain} Update Menu                               │
│   ${green}4.${plain} Legacy Version                            │
│   ${green}5.${plain} Uninstall                                 │
│────────────────────────────────────────────────│
│   ${green}6.${plain} Reset Username & Password & Secret Token  │
│   ${green}7.${plain} Reset Web Base Path                       │
│   ${green}8.${plain} Reset Settings                            │
│   ${green}9.${plain} Change Port                               │
│  ${green}10.${plain} View Current Settings                     │
│────────────────────────────────────────────────│
│  ${green}11.${plain} Start                                     │
│  ${green}12.${plain} Stop                                      │
│  ${green}13.${plain} Restart                                   │
│  ${green}14.${plain} Check Status                              │
│  ${green}15.${plain} Logs Management                           │
│────────────────────────────────────────────────│
│  ${green}16.${plain} Enable Autostart                          │
│  ${green}17.${plain} Disable Autostart                         │
│────────────────────────────────────────────────│
│  ${green}18.${plain} SSL Certificate Management                │
│  ${green}19.${plain} Cloudflare SSL Certificate                │
│  ${green}20.${plain} IP Limit Management                       │
│  ${green}21.${plain} Firewall Management                       │
│  ${green}22.${plain} SSH Port Forwarding Management            │
│────────────────────────────────────────────────│
│  ${green}23.${plain} Enable BBR                                │
│  ${green}24.${plain} Update Geo Files                          │
│  ${green}25.${plain} Speedtest by Ookla                        │
│  ${green}26.${plain} Theme Management                          │
╚────────────────────────────────────────────────╝
"
    show_status
    echo && read -p "Please enter your selection [0-25]: " num

    case "${num}" in
    0)
        exit 0
        ;;
    1)
        check_uninstall && install
        ;;
    2)
        check_install && update
        ;;
    3)
        check_install && update_menu
        ;;
    4)
        check_install && legacy_version
        ;;
    5)
        check_install && uninstall
        ;;
    6)
        check_install && reset_user
        ;;
    7)
        check_install && reset_webbasepath
        ;;
    8)
        check_install && reset_config
        ;;
    9)
        check_install && set_port
        ;;
    10)
        check_install && check_config
        ;;
    11)
        check_install && start
        ;;
    12)
        check_install && stop
        ;;
    13)
        check_install && restart
        ;;
    14)
        check_install && status
        ;;
    15)
        check_install && show_log
        ;;
    16)
        check_install && enable
        ;;
    17)
        check_install && disable
        ;;
    18)
        ssl_cert_issue_main
        ;;
    19)
        ssl_cert_issue_CF
        ;;
    20)
        iplimit_main
        ;;
    21)
        firewall_menu
        ;;
    22)
        SSH_port_forwarding
        ;;
    23)
        bbr_menu
        ;;
    24)
        update_geo
        ;;
    25)
        run_speedtest
        ;;
    26)
        bash <(curl -Ls https://raw.githubusercontent.com/AghayeCoder/tx-themehub/master/install.sh)
        ;;
    *)
        LOGE "Please enter the correct number [0-25]"
        ;;
    esac
}

if [[ $# > 0 ]]; then
    case $1 in
    "start")
        check_install 0 && start 0
        ;;
    "stop")
        check_install 0 && stop 0
        ;;
    "restart")
        check_install 0 && restart 0
        ;;
    "status")
        check_install 0 && status 0
        ;;
    "settings")
        check_install 0 && check_config 0
        ;;
    "enable")
        check_install 0 && enable 0
        ;;
    "disable")
        check_install 0 && disable 0
        ;;
    "log")
        check_install 0 && show_log 0
        ;;
    "banlog")
        check_install 0 && show_banlog 0
        ;;
    "update")
        check_install 0 && update 0
        ;;
    "legacy")
        check_install 0 && legacy_version 0
        ;;
    "install")
        check_uninstall 0 && install 0
        ;;
    "uninstall")
        check_install 0 && uninstall 0
        ;;
    *) show_usage ;;
    esac
else
    show_menu
fi