ChangeLog

2026-04-20  Mintsuki  <mintsuki@protonmail.com>

    *** Release 11.4.1 ***

    Noteworthy changes compared to the previous release, 11.4.0:

    Bug fixes:
        - Fix an issue with the limlz compressor/decompressor that could cause
          spurious failures ("limine integrity error") on the legacy x86 BIOS
          port.
        - Portability fixes for the `limlzpack` build-time tool (mainly fixing
          it on big-endian build systems).
        - Miscellaneous bug fixes.

2026-04-19  Mintsuki  <mintsuki@protonmail.com>

    *** Release 11.4.0 ***

    Noteworthy changes compared to the previous release, 11.3.1:

    New features:
        - Revamped BIOS early-stage decompressor, replacing gzip (tinf) with a
          simpler, smaller, faster, and more auditable compressor/decompressor
          using a fixed-width LZ77 encoding purpose-tailored for x86 code mixed
          with data by Kamila Szewczyk.
        - Implement timeout and entry control of the Boot Loader Interface
          (BLI).
        - Make `graphics: no` functional on UEFI ports as well.

    Bug fixes:
        - Revert the "Call Apple set_os protocol on UEFI" change from 11.3.1 as
          that seems to have been causing issues relating to input devices on
          certain other Apple systems, pending investigation and usefulness
          assessment.
        - Many assorted bug fixes and improvements.

2026-04-09  Mintsuki  <mintsuki@protonmail.com>

    *** Release 11.3.1 ***

    (Note: 11.3.0 was skipped due to GHA migration issues)

    Noteworthy changes compared to the previous release, 11.2.1:

    New features:
        - Implement "TSC Frequency" feature of the Limine boot protocol.
        - Add PIT-based TSC calibration for BIOS.
        - Do not clear framebuffer in quiet mode.

    Bug fixes:
        - Make "Keep IOMMU" Limine boot protocol feature x86-64-only.
        - Do not clear framebuffer on modeset as Flanterm immediately repaints
          it, wasting time.
        - Allow menu recovery on overflow panics in the multiboot protocols.
        - Significantly improve TSC calibration accuracy.

    Miscellaneous:
        - Do not force-start uninitialised GOP outputs if a framebuffer is
          already available, for compatibility with quirky firmwares (Apple
          Macs).
        - Call Apple set_os protocol on UEFI to try to keep iGPU alive on
          dual-GPU Apple Macs.
        - Migrated to GitHub alongside with several subprojects.
        - Build limine.exe using i486 MinGW from osdev0/mingw-binary-builds
          in binary builds for better compatibility.

2026-04-04  Mintsuki  <mintsuki@protonmail.com>

    *** Release 11.2.1 ***

    Noteworthy changes compared to the previous release, 11.2.0:

    Bug fixes:
        - Revert Secure Boot enforcement policy for configuration file hash
          and other file hashes. This broke semantic versioning, so the fair
          thing to do is to revert it and move on to 12.x afterwards.
        - Add workaround for VMware optical drive detection on BIOS.

2026-04-02  Mintsuki  <mintsuki@protonmail.com>

    *** Release 11.2.0 ***

    Noteworthy changes compared to the previous release, 11.1.0:

    New features:
        - Enforce hash verification of loaded files when UEFI Secure Boot is
          active. When Secure Boot is detected, Limine requires an enrolled
          config checksum, BLAKE2B hashes on security-critical file paths,
          disables the config editor, and forces hash_mismatch_panic to yes.
        - Linux boot protocol: Load and concatenate all modules on non-x86, not
          just the first.
        - ISO 9660: Handle Rock Ridge NM continuation entries.

    Bug fixes:
        - Use -malign-double for IA-32 UEFI builds to match UEFI specification
          struct alignment.
        - Fix unique sector pool being clobbered by find_unique_sectors().
        - Revert GOP workaround that called SetMode() on every handle to avoid
          clearing the screen where unnecessary/ugly.
        - Do not call ClearScreen() on EFI fallback terminal init for the same
          reason.
        - Miscellaneous fixes for low severity bugs found with static analysis.

    Miscellaneous:
        - Re-enable decompressor bounds checks, CRC32, and length validation.
        - Mix hardware entropy on non-x86 via RNDR instruction and EFI RNG
          protocol and add support for aarch64 hardware RNG.
        - Prefer 64-bit rdrand/rdseed on x86-64 over 32-bit. Fixes potential
          issues on certain unpatched Zen 5 systems.

2026-03-25  Mintsuki  <mintsuki@protonmail.com>

    *** Release 11.1.0 ***

    Noteworthy changes compared to the previous release, 11.0.0:

    New features:
        - Walk back previous breaking change where base revisions 0 through 3
          were dropped on x86.
        - Walk back previous breaking change where base revisions < 6 were
          dropped on loongarch64 and riscv64 (it remains in effect on aarch64).

    Miscellaneous:
        - Improve Limine protocol page tables layout to better coalesce
          contiguous 4KiB entries into 2MiB/1GiB pages.

2026-03-23  Mintsuki  <mintsuki@protonmail.com>

    *** Release 11.0.0 ***

    Noteworthy changes compared to the previous release, 10.8.5:

    Breaking changes:
        - Dropped support for base revisions 0, 1, 2, and 3 of the Limine boot
          protocol for x86.
        - Dropped support for all base revisions except 6 of the Limine boot
          protocol for aarch64, loongarch64, and riscv64.

    New features:
        - Implement support for base revision 6 of the Limine boot protocol
          (see specification for details).
        - Added support for multiprocessor startup for the loongarch64 version
          of the Limine boot protocol.
        - Add a new feature to the Limine boot protocol,
          `flanterm_fb_init_params`, that passes information to the booted
          executable about the text terminal, as used by the bootloader, in a
          Flanterm-compatible format.
        - Add a new boot protocol, "efi_boot_entry", which allows rebooting
          into other EFI boot menu entries by name.
        - Support using a formatted path as the value for the `default_entry`
          configuration option.

    Bug fixes:
        - Miscellaneous fixes relating to the Linux boot protocol on non-x86
          ports.
        - Improve feature to remember last booted entry by internally using the
          same path format as `default_entry`.

    Miscellaneous:
        - LoongArch64 is no longer in an "experimental" state, but rather fully
          supported.
        - Updated the Flanterm library to 3.0.2.

2026-03-12  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.8.5 ***

    Noteworthy changes compared to the previous release, 10.8.4:

    Bug fixes:
        - Update the Flanterm library for a hotfix to a regression introduced
          in Flanterm 3.0.1 that would also cause misrenderings of the boot
          menu's text colour for selected entries.

2026-03-11  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.8.4 ***

    Noteworthy changes compared to the previous release, 10.8.3:

    Bug fixes:
        - Update the Flanterm library to 3.0.1 to fix a regression that would
          cause misrenderings of the boot menu's text colour for selected
          entries.

2026-03-07  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.8.3 ***

    Noteworthy changes compared to the previous release, 10.8.2:

    Bug fixes:
        - Preserve LAPIC register state across x2APIC-to-xAPIC transition.
        - SMP: Widen bsp_lapic_id to uint32_t to avoid x2APIC ID truncation.
        - Linux boot protocol: Validate RISC-V kernel header before trusting
          image_size for allocation.
        - Host tool: Replace GCC/Clang __builtin overflow checks with portable
          C99 helpers.
        - Host tool: Fix ENDSWAP width mismatch in GPT-to-MBR partition entry
          conversion on big-endian hosts.
        - BIOS HDD Stage 1: Fix 64-bit LBA calculation and carry propagation in
          disk read loop.
        - BIOS HDD Stage 1: Fix stack imbalance on int 13h/AH=48h failure.
        - Add NULL terminator check in config_get_entry header line scan.
        - Guard editor window_size decrement to prevent underflow on long line
          wrapping.

2026-02-26   Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.8.2 ***

    Noteworthy changes compared to the previous release, 10.8.1:

    Bug fixes:
        - Revert broken/pointless legacy PIC reinitialisation logic on flush
          that accidentally made it into 10.8.1.

2026-02-26  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.8.1 ***

    Noteworthy changes compared to the previous release, 10.8.0:

    Bug fixes:
        - Fix VT-d disable order to TE, IRE, QIE.
        - Fix VT-d polling loop read order and remove polling timeout.
        - SMP: Add xAPIC ICR delivery status checks to INIT-SIPI-SIPI sequence.
        - Amend certain APIC-related issues of Limine boot protocol and
          implement the corrected behaviour.

2026-02-22  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.8.0 ***

    Noteworthy changes compared to the previous release, 10.7.0:

    New features:
        - Limine boot protocol: Implement base revision 5.
        - Limine boot protocol: Implement x86-64 Keep IOMMU feature.

    Bug fixes:
        - Fix font autoscaling not resetting per display in multi-display
          configurations.
        - Fix undefined behaviour in memmove() due to direct pointer
          comparisons.
        - Skip GOP and VBE modes with invalid pitch values.
        - GOP: Work around firmware reporting incorrect pitch via QueryMode()
          by fetching from gop->Mode->Info after SetMode().
        - GOP: Ensure SetMode() is called at least once per handle to work
          around firmware not initialising state without that.
        - Fall back to EFI/BIOS console instead of panicking on small
          terminals.

    Miscellaneous:
        - Disable Intel VT-d and AMD-Vi IOMMUs before kernel entry by default
          for the Limine, multiboot1, and multiboot2 protocols.
        - Try to gracefully disable x2APIC before handoff for the Limine
          (unless kernel asks for it), multiboot1, and multiboot2 protocols.
        - Replace cycle-based delay() with wall time calibrated stall().
        - Prefer physical memory allocations below 4 GiB on x86.
        - Align ACPI table memory map entries to page size where safe.
        - Undo several overzealous limits and bounds checks added in prior
          releases.
        - Updated limine-protocol subproject to latest revision.

2026-02-10  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.7.0 ***

    Noteworthy changes compared to the previous release, 10.6.6:

    New features:
        - Multiboot2: Implement relocatable preference=2 (prefer highest
          address).
        - Multiboot2: Accept LOAD_BASE_ADDR and NETWORK info request tags.
        - Multiboot2: Accept EFI system table and image handle info requests.

    Bug fixes:
        - Extensive hardening of the ELF and PE loaders with thorough bounds,
          overflow, and alignment validation.
        - Extensive hardening of the Multiboot and Multiboot2 protocol
          implementations with thorough validation of header fields, tag sizes,
          and relocation parameters.
        - Linux boot protocol: Honour kernel_alignment field from the x86 boot
          protocol header for kernel load address alignment, and init_size for
          allocation sizing. Use image_size from the kernel header for non-x86
          allocation.
        - Fix several bugs in the physical memory manager's overlap detection,
          sanitiser logic, and memory info reporting.
        - SMP: Fix x86 AP temp stack pointer to pass top of allocation instead
          of base. Fix several bugs in the AArch64 SMP trampoline and AP
          enumeration paths. Skip APs with unrecognised PSCI method instead of
          panicking.
        - Host tool: Fix signature search algorithm to correctly handle partial
          prefix overlaps. Bounds-check GPT partition entry offset arithmetic
          for overflow. Guard secondary GPT nuke against alternate_lba
          underflow.
        - ACPI: Fall back to RSDT when XSDT is above 4 GiB on 32-bit.
        - VMM: Preserve WC/FB cache attribute in x86 page table flags during
          page splits.

    Miscellaneous:
        - SMP: Send two SIPIs per Intel SDM recommendation for AP startup.
        - Use rdtime.d and CPUCFG for LoongArch64 performance timing.
        - Use rdtime and time_base_frequency for RISC-V performance timing.
        - Updated Flanterm subproject to latest revision.
        - Miscellaneous bug fixes and improvements.

2026-02-05  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.6.6 ***

    Noteworthy changes compared to the previous release, 10.6.5:

    Bug fixes:
        - Re-add a mistakenly removed check for EFI volume responsiveness. Lack
          of this check would indirectly cause hangs due to EFI volumes being
          indexed despite their non-responsiveness.

    Miscellaneous:
        - Replace suboptimal code to handle reads close to the end of a volume.

2026-02-04  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.6.5 ***

    Noteworthy changes compared to the previous release, 10.6.4:

    Bug fixes:
        - Work around PicoEFI structure definition issue related to padding
          that would cause volume_by_device_path() to always fail for
          non-optical media.
        - Fix issue that would cause unique sector detection on systems with 3+
          collisions to fail and misreport unique sectors.
        - Add extra layer of verification for unique sector matches to minimise
          the chance of volume mismatches.

    Miscellaneous:
        - RISC-V: Implement Flanterm refresh path for SoCs not exposing Zicbom
          in the device tree or ACPI (often the case with U-boot).
        - Use volume_by_device_path() as primary disk_volume_from_efi_handle()
          detection method.
        - Lazily discover unique sectors only when the fallback requiring this
          procedure is actually used.

2026-02-02  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.6.4 ***

    Noteworthy changes compared to the previous release, 10.6.3:

    Bug fixes:
        - Strip out all code relying on disk writes from the codebase. This
          gets rid of the (remote) possibility of disk corruption and the (even
          more remote) possibility of firmware/flash corruption. This also
          sorts out an issue on Apple Silicon where m1n1/U-boot appears to
          leave the NVMe controller in an inconsistent state after write
          operations are attempted.

2026-01-14  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.6.3 ***

    Noteworthy changes compared to the previous release, 10.6.2:

    Bug fixes:
        - Fix an issue with the `limine` host tool where the files read by or
          created by the `bios-install` command with the
          `--uninstall-data-file=` flag were prefixed by `=` due to an
          off-by-one error.
        - Fix an issue with the `limine` host tool where the `--quiet` and
          `--reset` flags could cause the next flag to be ignored due to an
          off-by-one error.
        - Fix an issue with the `limine` host tool that would allow a user to
          provide a GPT BIOS boot partition to the `bios-install` command that
          was 1 greater than the maximum number of partitions due to an
          off-by-one error.
        - Fix internal module path corruption in the Limine boot protocol code,
          caused by a static buffer reuse bug.
        - Add timeout for A20 address line initialisation in the keyboard
          controller code path. Lack of this could cause hangs on certain older
          "legacy-free" PCs.
        - Fix a couple of minor memory leaks.
        - Undo several overzealous "bug fixes" done since 10.5.0 for issues
          that were impossible or highly unlikely to trigger in practice.
        - Miscellaneous bug fixes.

2026-01-07  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.6.2 ***

    Noteworthy changes compared to the previous release, 10.6.1:

    Bug fixes:
        - Fix a bug where a buffer holding a configuration file option's value
          was erroneously overwritten. This affected x86 BIOS builds only, and
          it would be triggered if the `serial_baudrate` configuration file
          option was used.

2026-01-05  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.6.1 ***

    Noteworthy changes compared to the previous release, 10.6.0:

    Bug fixes:
        - Fix an issue where there were no bound checks when pressing the
          delete key in the menu entry editor, sometimes causing out-of-bounds
          accesses.
        - Add many checks for return values of disk-related functions that
          could fail.
        - Fix a typo in the physical memory manager code where a pointer was
          checked instead of the value it was pointing to. This could have in
          theory caused 0-length usable memory entries to appear in the memory
          map.
        - Add checks to avoid division by 0 if the user-specified baud rate is
          0.
        - Fix broken calculation in the fb_clear() function that caused severe
          out-of-bounds writes when the bits-per-pixel were not 32 or 16.
        - Fix potential unaligned memory accesses in the BLAKE2B code. This
          could have caused issues on RISC architectures like aarch64 or
          riscv64.
        - Fix missing continues in the riscv ISA string initialisation logic.
          This could have caused HARTs with invalid ISA strings to be used
          anyways instead of being ignored.
        - More minor bug fixes for bugs discovered during static analysis.

    Miscellaneous:
        - Use C versions of mem*() functions instead of assembly versions for
          x86 and x86-64.

2025-12-28  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.6.0 ***

    Noteworthy changes compared to the previous release, 10.5.1:

    New features:
        - ISO9660: Add support for large, multi-extent files.

    Bug fixes:
        - Unbreak BIOS booting from optical media with ISO9660 filesystems on
          many platforms including QEMU. This was a regression introduced in
          10.5.1.
        - Fix an issue with large (>4GiB) physical memory allocations on 32-bit
          platforms. Some values were truncated to size_t (aka uint32_t) in
          many instances causing bugs.
        - Fix a couple of memory leaks missed in 10.5.1.
        - Add safeguard against the font file being too small for the expected
          size. This avoids potential panics from the filesystem driver, and it
          instead just prints a warning and falls back to using the default
          font.

    Miscellaneous:
        - Update description of the `term_font_size` and `term_font_spacing`
          configuration options in CONFIG.md.

2025-12-26  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.5.1 ***

    Noteworthy changes compared to the previous release, 10.5.0:

    Bug fixes:
        - Many bug fixes throughout the codebase, mainly tackling hardening
          (especially of filesystem drivers). Most issues were caught with
          static analysis.
        - Fixage of some memory leaks.
        - Fixage of major issue that could have caused UEFI PXE to not work.
        - Multiboot1: fix issue that would cause the information buffer to be
          underallocated.

2025-12-11  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.5.0 ***

    Noteworthy changes compared to the previous release, 10.4.0:

    New features:
        - Add new `interface_help_colour` global configuration file option to
          allow changing the colour of "helper" messages in the interface.
        - Add new `interface_rotation` global configuration option to allow
          rotating the output interface be 0, 90, 180, or 270 degrees.

2025-11-30  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.4.0 ***

    Noteworthy changes compared to the previous release, 10.3.2:

    New features:
        - Add new configuration file option "global_dtb" to allow overriding
          the device tree used by Limine itself as well as for all boot entries
          (unless overridden by entry-local "dtb_path" option).

    Bug fixes:
        - Flush entire I-Cache if it is not PIPT on aarch64.
        - Fix use-after-free bug in riscv64 initialisation code related to
          device tree handling.

    Miscellaneous:
        - Framebuffer-related caching improvements for riscv64 and aarch64.
          This should fix a long standing issue where, on a lot of riscv64
          boards, the Limine interface would look mangled due to missing cache
          flushing.
        - Prioritise using ACPI for riscv64 initialisation code if available
          and if a DTB is not manually specified.

2025-11-23  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.3.2 ***

    Noteworthy changes compared to the previous release, 10.3.1:

    CI-related changes, otherwise, same as 10.3.1.

2025-11-23  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.3.1 ***

    Noteworthy changes compared to the previous release, 10.3.0:

    Bug fixes:
        - Fix wrong virtual address related constants, for the loongarch64
          port, that made Limine-protocol kernels fail to boot.
        - Fix issue that caused the MBR ID in the Limine boot protocol
          limine_file structure to always be 0.

2025-11-07  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.3.0 ***

    Noteworthy changes compared to the previous release, 10.2.1:

    **Special notes:**
        Despite there being breaking changes in this release, no major version
        bump is done; this is because the changes are minor enough, there are
        no big new features, and version 10.x was not released long enough ago.
        This is technically in violation of Semantic Versioning, but considered
        to be an acceptable exception.

    Breaking changes:
        - Change default paths and default path ordering for configuration file
          search. Mainly, search first for a configuration file in the same
          directory as the EFI application file of Limine, on EFI ports.
        - Change default path ordering for stage 3 file search on BIOS ports.
        - No longer install the limine.h header file on the host.
        - No longer install PROTOCOL.md (Limine Boot Protocol specification) on
          the host.

    Bug fixes:
        - Fix an issue where code assumed that the RSDT address in the RSDP was
          always non-NULL, which could cause crashes or hangs when using base
          revision 4 of the Limine Boot Protocol.

2025-10-29  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.2.1 ***

    Noteworthy changes compared to the previous release, 10.2.0:

    Bug fixes:
        - Add workaround for skipping SPI flash devices exposed as EFI volumes.
          This fixes the hanging issues on many ARM laptops, without breaking
          U-Boot unlike the previous workaround.

2025-10-26  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.2.0 ***

    Noteworthy changes compared to the previous release, 10.1.1:

    New features:
        - Implement base revision 4 of the Limine boot protocol as per
          documentation (read documentation for specific details).

    Bug fixes:
        - "Fix" multiboot1 framebuffer structure to match GRUB instead of the
          multiboot1 specification.

2025-10-13  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.1.1 ***

    Noteworthy changes compared to the previous release, 10.1.0:

    Bug fixes:
        - DTBs: Always reallocate DTBs to bootloader-reclaimable memory. This
          is to prevent pointers to EFI/reserved memory from being leaked to
          Limine protocol executables, which is against said protocol, which
          mandates that DTBs have to be in bootloader-reclaimable memory.

2025-10-05  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.1.0 ***

    Noteworthy changes compared to the previous release, 10.0.1:

    New features:
        - Expand safety checks of the `limine bios-install` command and replace
          the `--force-mbr` flag with just `--force`.
        - Add autodetection of the BIOS boot partition if no explicit partition
          index is passed to `limine bios-install`.

    Bug fixes:
        - Only use ASCII characters for terminal output when graphical output
          fails to initialise and the EFI standard output console is used
          instead.

    Miscellaneous:
        - Remove left-over logic that was meant to supplement the removed GPT
          embedding feature.
        - Remove workaround to allow building the RISC-V port with LLVM <=16.
        - Update a bunch of output messages from the `limine` host tool.

2025-09-21  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.0.1 ***

    Noteworthy changes compared to the previous release, 10.0.0:

    Bug fixes:
        - Fix a potential use-after-free issue when flushing interrupts on x86
          UEFI systems.
        - Prefer using the 32-bit Linux protocol unless it is strictly
          necessary to use the 64-bit protocol due to allocation constraints.
          This is due to reports of the 32-bit protocol being more reliable
          on certain rare systems where the 64-bit protocol crashes or hangs.

2025-09-15  Mintsuki  <mintsuki@protonmail.com>

    *** Release 10.0.0 ***

    Noteworthy changes compared to the previous release, 9.6.7:

    Breaking changes:
        - GPT embedding is no longer supported as a deployment method for
          GPT-with-BIOS configurations. The rationale for this being that it is
          far too fragile, especially with regards to growing or shrinking disk
          images, and it may cause certain machines to refuse to boot such
          setups as they are technically in violation of the GPT specification.
        - The default baud rate for serial I/O on BIOS systems is now 115200,
          instead of 9600.
        - BIOS (chainloading) boot menu entries are now hidden when booting in
          UEFI mode, and EFI (chainloading) entries are hidden when booting in
          BIOS mode.
        - For the Limine boot protocol, for relocatable executables, KASLR now
          defaults to being disabled. The rationale for this being that KASLR
          is a somewhat niche and fairly bypassable security technique, which
          can cause headaches for kernels not wanting to support it, and make
          troubleshooting harder.
        - For the Limine boot protocol, for PE format kernels, do not discard
          discardable sections, as code put to a discardable section like INIT
          might be intended to only be discarded after early kernel init, not
          before the kernel is even loaded.

2025-09-13  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.6.7 ***

    Noteworthy changes compared to the previous release, 9.6.6:

    Bug fixes:
        - Relax EFI handle validation before running fallback volume detection.
          This further addresses issues caused by 9.5.4.

2025-09-06  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.6.6 ***

    Noteworthy changes compared to the previous release, 9.6.5:

    Bug fixes:
        - Fix regression introduced by 9.5.4 that caused Limine to fail to boot
          with U-Boot.

2025-08-30  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.6.3 through 9.6.5 ***

    Noteworthy changes compared to the previous release, 9.6.2:

    These are special hotfix releases attempting to address issues with the
    Forgejo release workflow after the migration to Codeberg.

    Other than that, they have no differences compared to 9.6.2.

2025-08-30  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.6.2 ***

    Noteworthy changes compared to the previous release, 9.6.1:

    Miscellaneous:
        - The Limine project has moved its home to Codeberg.
        - Nyu-EFI was rebranded to PicoEFI.
        - Minor build system improvements and subproject bumps.

2025-08-16  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.6.1 ***

    Noteworthy changes compared to the previous release, 9.6.0:

    Bug fixes:
        - EFI chainloading: Make EFI device path of loaded image relative to
          the loaded image device handle. This now complies with the EFI
          specification, and, amongst others, it fixes chainloading Shim.

    Miscellaneous:
        - Miscellaneous build system changes and improvements.
        - Do not disable linker relaxations for LoongArch64.
        - `limine` host tool: Add check to ensure that a provided GPT BIOS
          partition is at least 32KiB in size.

2025-08-07  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.6.0 ***

    Noteworthy changes compared to the previous release, 9.5.4:

    Miscellaneous:
        - Get rid of the fragile and messy "freestanding-toolchain" build
          helper tool. This allows for a simpler and more predictable way of
          selecting the target toolchain components via ./configure.

2025-08-06  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.5.4 ***

    Noteworthy changes compared to the previous release, 9.5.3:

    Bug fixes:
        - Exclude non-PCI devices from the volume discovery process on UEFI.
          This is because on (especially, but not limited to) Snapdragon X
          systems, firmware/flash devices, which are non-PCI, are exposed as
          block I/O volumes too. This skips them, which makes the bootloader
          more reliable and avoids long hangs at boot.
        - Miscellaneous changes and fixes to the fallback volume discovery
          path, to increase reliability and reduce the chance of accidental
          damage or data loss. See GitHub issue #525.
        - Minor assembly improvement that fixed Limine not building with old
          NASM.

2025-08-04  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.5.3 ***

    Noteworthy changes compared to the previous release, 9.5.2:

    Bug fixes:
        - Miscellaneous build system fixes, mainly to sort out possible issues
          introduced by 9.5.2.

2025-08-01  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.5.2 ***

    Noteworthy changes compared to the previous release, 9.5.1:

    Bug fixes:
        - Revert change that moved to `nm` from `objdump` for generating the
          symbol table, as that broke section-specific symbol dumps and caused
          BIOS stage 2 to be bloated with the full symbol table.

    Miscellaneous:
        - Miscellaneous build system updates and improvements.

2025-07-29  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.5.1 ***

    Noteworthy changes compared to the previous release, 9.5.0:

    Bug fixes:
        - Unbreak build using ld.gold as linker.

    Miscellaneous:
        - Miscellaneous build system updates and improvements.

2025-07-14  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.5.0 ***

    Noteworthy changes compared to the previous release, 9.4.0:

    New features:
        - protocols/efi: Hybridise loading mechanism with old memory-device
          based approach. This may work around the redundant requirement that
          EFI applications be signed, and it may fix certain issues created
          when the chainload mechanism was changed in 9.0.1.

    Bug fixes:
        - `limine` host tool: Fix some mismatched printf format specifiers.

    Miscellaneous:
        - Miscellaneous build system updates and improvements.
        - Many dependencies had their commits bumped, some new dependencies
          were added (limine-protocol), some were changed (libfdt moved to a
          different repository that only includes BSD-2-Clause licensable
          code).

2025-07-10  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.4.0 ***

    Noteworthy changes compared to the previous release, 9.3.4:

    New features:
        - BLI: Implement `LoaderTimeInitUSec` and `LoaderTimeExecUSec`.
          These are variables used by `systemd-analyze` and are useful for boot
          performance metrics.
        - Limine boot protocol: Add bootloader performance feature.
          This feature provides the same information as the new Boot Loader
          Interface variables, but encoded in a nicer way for Limine protocol
          executables.

    Miscellaneous:
        - Use `nm` instead of `objdump` for generating the symbol table, which
          results in a better, more consistent output, especially for non-x86
          architectures.
        - Miscellaneous build system updates and improvements.

2025-06-21  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.3.4 ***

    Noteworthy changes compared to the previous release, 9.3.3:

    Bug fixes:
        - ELF: Make an optimisation related to skipping scanning of .bss
          regions for finding of structures in the loaded image (for Limine
          protocol structures or otherwise) less overeager as that could break
          in certain cases.
        - SMP: On x86, ensure that the value of IA32_APIC_BASE is the same on
          the APs as it is on the BSP.
        - PMM: Mark EfiLoader{Code,Data} regions as bootloader reclaimable
          rather than reserved memory, as for certain protocols, like the
          Limine boot protocol, reserved memory is unmapped at runtime, while
          these regions may contain hot data that is still needed, like Limine
          bootloader memory stacks.

2025-05-27  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.3.3 ***

    Noteworthy changes compared to the previous release, 9.3.2:

    Bug fixes:
        - Reinstate the limit for scanned drives to 0xf0. This is due to a
          report of int 13h hangs when used on drives >=0xf0.

2025-05-19  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.3.2 ***

    Noteworthy changes compared to the previous release, 9.3.1:

    Bug fixes:
        - PMM: Mark EfiBootServices{Code,Data} memory regions as bootloader
          reclaimable instead of usable free memory as apparently the ACPI
          and UEFI specifications make no guarantees about useful structures
          being left in these areas after leaving boot services (namely BGRT
          and ESRT).

2025-05-15  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.3.1 ***

    Noteworthy changes compared to the previous release, 9.3.0:

    Bug fixes:
        - Remove .git directory mistakenly left over inside release tarballs.
        - Fix bug that would lead to panics when booting Linux protocol kernels
          without modules on x86.

2025-05-07  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.3.0 ***

    Noteworthy changes compared to the previous release, 9.2.3:

    New features:
        - Add optional support for the 64-bit x86-64 boot protocol for Linux.
          This is supported on the UEFI/x86-64 port of Limine, and it is
          preferred over the 32-bit boot protocol if supported by the given
          kernel. This helps with loading larger modules on certain systems
          with low amounts of low memory which would otherwise panic.

    Bug fixes:
        - Fix away some ungraceful handling of out-of-memory situations when
          loading files using the Linux boot protocol. Make into panics instead
          of crashes or hangs.

    Miscellaneous:
        - Improve performance and memory usage of loading modules for the Linux
          boot protocol.

2025-04-12  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.2.3 ***

    Noteworthy changes compared to the previous release, 9.2.2:

    Bug fixes:
        - Fix issues introduced by the stb_image fix introduced in 9.2.1 which
          could cause hangs or crashes when certain wallpaper images are used.

    Miscellaneous:
        - Update cc-runtime to new, integer-only, packed version.

2025-03-31  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.2.2 ***

    Noteworthy changes compared to the previous release, 9.2.1:

    Bug fixes:
        - Two quick bug fixes and workarounds in order to make multiboot2 more
          resilient when booting specific kernels such as Xen.
        - Avoid mistakenly allocating more memory than necessary when creating
          the volume index.

2025-03-25  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.2.1 ***

    Noteworthy changes compared to the previous release, 9.2.0:

    Bug fixes:
        - Fix potential buffer overflow bug with our stb_image support code.

    Miscellaneous:
        - Dynamically allocate volume index instead of relying on a hard coded
          limit and a fixed allocation. This fixes potential panics or failure
          to access volumes on systems with a lot of drives/partitions.
        - Limine boot protocol/ELF: Print the name of unresolved symbols on
          panic.

2025-03-16  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.2.0 ***

    Noteworthy changes compared to the previous release, 9.1.3:

    New features:
        - Introduce initial support for the Boot Loader Interface
          specification.
        - Add /EFI/limine/limine.conf to the paths tried for config file when
          using EFI.

    Miscellaneous:
        - Do not try config path /EFI/BOOT/limine.conf unless booted using EFI.

2025-03-13  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.1.3 ***

    Noteworthy changes compared to the previous release, 9.1.2:

    Bug fixes:
        - Loongarch64: Fix alignment of TLB-refill handler.

    Miscellaneous:
        - Many fixes and improvements to documentation, installed or otherwise,
          including further licensing clarifications.

2025-03-11  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.1.2 ***

    Noteworthy changes compared to the previous release, 9.1.1:

    This release does not change anything code-wise, but rather it focuses on
    sorting out the licensing mess of Nyu-EFI, by updating it to the latest
    revision which tackles this problem, and furthermore it improves the
    COPYING file to be more explicit about submodules and their licensing.

2025-03-10  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.1.1 ***

    Noteworthy changes compared to the previous release, 9.1.0:

    Bug fixes:
        - Do not use ConOut for serial output exclusively unless serial is
          verified to be present to the best of our abilities. This fixes an
          issue where if `serial=yes` is used on some machines (including
          several Apple Mac models) a black screen will be shown instead of the
          Limine menu.

    Miscellaneous:
        - Begin signing tarballs and (most) commits.

2025-03-07  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.1.0 ***

    Noteworthy changes compared to the previous release, 9.0.1:

    New features:
        - `limine` host tool: When using the `bios-install` command on an
          ISOHYBRID with a GPT, automatically convert it to MBR, if possible
          and unless explicitly disabled, in order to enhance compatibility of
          said ISOHYBRIDs with many systems (of note, Lenovo Thinkpads).

2025-02-25  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.0.1 ***

    Noteworthy changes compared to the previous release, 9.0.0:

    Miscellaneous:
        - EFI chainload: Replace old chainload method with one that is more
          friendly to other EFI bootloaders such as rEFInd.
        - Limine boot protocol/PE: Map previously unmapped PE image headers.

2025-02-17  Mintsuki  <mintsuki@protonmail.com>

    *** Release 9.0.0 ***

    Noteworthy changes compared to the previous release, 8.7.0:

    Breaking changes:
        - Support for the ext2/3/4 filesystems has been once again dropped due
          to lack of maintenance and to avoid extra potential attack surface
          during Secure Boot Limine usage.
        - Drop support for the legacy config format (limine.cfg) and only keep
          around the new one (limine.conf) introduced with Limine 8.x.
        - Drop support for the (barely worked and seldom used) `chainload_next`
          protocol.

    New features:
        - Limine boot protocol: Introduce API revision 3, for the `limine.h`
          file with several renamed identifiers for better clarity.
        - Limine boot protocol: Specify and implement a new, convenience,
          "Executable Command Line feature".
        - Limine boot protocol: Use monitor/mwait CPU instructions, when
          available, to reduce CPU usage and increase performance during
          multiprocessor initialisation.
        - Add preferred aliases for BIOS and EFI chainload (namely `bios` and
          `efi`) protocol names for the `protocol` config option.

    Bug fixes:
        - EFI (chainload) boot protocol: Fix `path` option alias not working.

    Miscellaneous:
        - Update Flanterm submodule to latest.

2025-01-10  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.7.0 ***

    Noteworthy changes compared to the previous release, 8.6.1:

    New features:
        - Limine boot protocol: Add support for PE executables.
        - Linux boot protocol: Enable support for Loongarch64.
        - Add support for selecting a random wallpaper every boot if multiple
          are provided.
        - Add `path` aliases for `kernel_path` and `image_path` for the Linux
          and EFI Chainloading protocols respectively.

    Miscellaneous:
        - Submodule version/commit bumps.

2024-12-26  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.6.1 ***

    Noteworthy changes compared to the previous release, 8.6.0:

    Bug fixes:
        - Propagate EFI PXE device handle properly when chainloading.
        - Ensure that, when specifying a `dtb_path`, extra space is properly
          allocated just as is done for EFI-provided DTBs.

    Miscellaneous:
        - Linux on RISCs: General code clean up; pass EFI memory map and initrd
          information as EFI configuration tables alongside already passed DTB
          parameters for the same, in preparation for loongarch64 support.

2024-12-05  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.6.0 ***

    Noteworthy changes compared to the previous release, 8.5.0:

    New features:
        - Limine boot protocol: Specify and implement new "RISC-V BSP Hart ID"
          feature.
        - Limine boot protocol: Add a new "SBI" firmware type to the firmware
          type feature
        - Limine boot protocol: Add a new API revision 2 to the limine.h header
          file. This replaces many mentions of 'kernel' with a more neutral
          'executable' instead.
        - Config: add 'path' alias for 'kernel_path' for the Limine and
          multiboot1 and 2 protocols.

2024-11-30  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.5.0 ***

    Noteworthy changes compared to the previous release, 8.4.1:

    New features:
        - Limine boot protocol: Introduce limine.h API revisions to avoid API
          breaks.

    Bug fixes:
        - Limine boot protocol: Amend base revision 3 to keep EFI memmap
          pointer as virtual. Making it physical made no sense and is
          henceforth considered a bug.

    Miscellaneous:
        - Limine boot protocol: Rename SMP feature to MP feature for limine.h
          API revision 1+.
        - Limine boot protocol: Make some types that were void pointers into
          uint64_t's to better represent their physical nature; limine.h API
          revision 1+.

2024-11-25  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.4.1 ***

    Noteworthy changes compared to the previous release, 8.4.0:

    Miscellaneous:
        - Limine boot protocol: Ensure machines with pre-enabled x2APIC are
          properly supported.
        - Reuse a viable framebuffer for UEFI fallback terminal output (like on
          panics) if boot services have been exited instead of bailing out.
        - Miscellaneous build system updates.

2024-11-08  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.4.0 ***

    Noteworthy changes compared to the previous release, 8.3.2:

    New features:
        - Support passing Limine its configuration via SMBIOS tables.

    Miscellaneous:
        - Update cc-runtime to latest; use non-packed version.

2024-10-31  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.3.2 ***

    Noteworthy changes compared to the previous release, 8.3.1:

    Miscellaneous:
        - Limine boot protocol: Amend base revision 3 to mandate reporting base
          revision used to kernels.

2024-10-28  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.3.1 ***

    Noteworthy changes compared to the previous release, 8.3.0:

    Bug fixes:
        - Limine boot protocol: Revert broken optimisation.

2024-10-28  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.3.0 ***

    Noteworthy changes compared to the previous release, 8.2.0:

    New features:
        - Limine boot protocol: Specify and implement base revision 3. See the
          specification for further info.
        - Add a new `FW_TYPE` built-in config macro.

    Miscellaneous:
        - Bump Flanterm revision to a6f6edd6631c01caab932a59dce97bbd5f0c72c8.
        - Limine boot protocol: Misc optimisations to page tables usage.

2024-10-23  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.2.0 ***

    Noteworthy changes compared to the previous release, 8.1.2:

    New features:
        - Add device tree blob override configuration options for the Limine
          and Linux boot protocols.
        - Limine boot protocol: Filter `memory@...` nodes out of device trees.

    Miscellaneous:
        - Documentation: USAGE.md: Update `xorriso` command to produce
          ISOHYBRIDs with Joliet info and an HFS+ filesystem for broader
          compatibility.
        - Increase the size of the `limine-cd-uefi.bin` image to 5760 sectors;
          this allows more and/or larger EFI executables to fit (like for
          example those generated when compiling with -O0).
        - Bump cc-runtime revision to d5425655388977fa12ff9b903e554a20b20c426e.

2024-10-15  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.1.2 ***

    Noteworthy changes compared to the previous release, 8.1.1:

    Bug fixes:
        - Add missing register saves and restores around call from assembly to
          C code for the x86-64 UEFI port. This bug could have caused crashes
          with certain compiler optimisation levels (like -O0).
        - Adjust size of reserved area of VBE mode info struct to be the right
          size. This bug could have caused crashes with certain compiler
          optimisation levels (like -O0).
        - Ignore UEFI memory map entries of length 0. This fixes crashes that
          could have happened on quirky UEFI firmwares passing such entries.

2024-10-12  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.1.1 ***

    Noteworthy changes compared to the previous release, 8.1.0:

    Bug fixes:
        - Limine boot protocol: Do not hard depend on the CPU supporting the
          Page Attribute Table (PAT) *for SMP processors as well*.

2024-10-12  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.1.0 ***

    Noteworthy changes compared to the previous release, 8.0.14:

    Bug fixes:
        - Limine boot protocol: Do not hard depend on the CPU supporting the
          Page Attribute Table (PAT).

    New features:
        - Limine boot protocol: Add a `randomise_hhdm_base` config file option.

    Miscellaneous:
        - Update libfdt (from dtc) to 1.7.1.

2024-09-29  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.14 ***

    Noteworthy changes compared to the previous release, 8.0.13:

    Miscellaneous:
        - Limine boot protocol: Increase maximum memory map entry count from
          256 to 1024 as it would otherwise cause issues on certain systems.

2024-09-18  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.13 ***

    Noteworthy changes compared to the previous release, 8.0.12:

    Bug fixes:
        - multiboot2: Fix handling of relocatable kernels.

2024-09-15  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.12 ***

    Noteworthy changes compared to the previous release, 8.0.11:

    Bug fixes:
        - Fix a build system problem that could cause configure failures if
          STRIP variable set to an absolute path.

    Miscellaneous:
        - Updates for "freestanding-headers" being rebranded to
          "freestnd-c-hdrs-0bsd".
        - Updates for "limine-efi" being rebranded to "nyu-efi".

2024-09-10  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.11 ***

    Noteworthy changes compared to the previous release, 8.0.10:

    Miscellaneous:
        - Replace "freestnd-c-hdrs" back with "freestanding-headers" due to
          GPLv3 with Runtime Exceptions licensing concerns and size.

2024-09-09  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.10 ***

    Noteworthy changes compared to the previous release, 8.0.9:

    Bug fixes:
        - Fix bug where contents of loaded EFI image size variable could be off
          significantly compared to actual size when compiled with GCC, causing
          many issues.
        - Fix memory manager bug introduced in 2021 during optimisation work.

    Miscellaneous:
        - Replace "freestanding-headers" with GCC-provided "freestnd-c-hdrs".

2024-09-04  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.9 ***

    Noteworthy changes compared to the previous release, 8.0.8:

    Bug fixes:
        - Fix an issue that could cause Limine to not boot on UEFI systems with
          too many memory map entries.

2024-09-03  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.8 ***

    Noteworthy changes compared to the previous release, 8.0.7:

    Bug fixes:
        - Work around makefile issues that caused GNU make versions 4.0 and 4.1
          as well as version 3.80 to fail to build Limine.

2024-09-02  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.7 ***

    Noteworthy changes compared to the previous release, 8.0.6:

    Miscellaneous:
        - Remove GNU make version check as we now support building on older
          make versions.
        - Miscellaneous build system improvements.

2024-08-25  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.6 ***

    Noteworthy changes compared to the previous release, 8.0.5:

    Bug fixes:
        - Fix issue with makefiles that would cause, among others, issues with
          job control on older GNU make versions.

    Miscellaneous:
        - Update limine-efi dependency to latest.
        - Minor build system improvements.

2024-08-12  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.5 ***

    Noteworthy changes compared to the previous release, 8.0.4:

    Bug fixes:
        - Limine boot protocol: Obtain LAPIC ID from LAPIC instead of CPUID.
          This fixes crashes on some odd machines whose firmware remaps the
          BSP's LAPIC ID from the default one.

2024-08-10  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.4 ***

    Noteworthy changes compared to the previous release, 8.0.3:

    Bug fixes:
        - Limine boot protocol: Fix off-by-1 error in HHDM MAXPHYADDR bounds
          check.

    Miscellaneous:
        - Updated cc-runtime dependency to latest, packed version.

2024-08-09  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.3 ***

    Noteworthy changes compared to the previous release, 8.0.2:

    Bug fixes:
        - AArch64, riscv64: SMP: Fix BSP potentially timing out while waiting
          for APs due to missing delay.

2024-08-08  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.2 ***

    Noteworthy changes compared to the previous release, 8.0.1:

    Bug fixes:
        - Menu: Miscellaneous cosmetic fixes.
        - Editor: Fix input and displaying of tab characters.

    Miscellaneous:
        - Config: Accept tab characters as whitespace after option colon.

2024-08-05  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.1 ***

    Noteworthy changes compared to the previous release, 8.0.0:

    Bug fixes:
        - Assortment of menu fixes to issues that could cause things not to
          render as they should.

    Miscellaneous:
        - Documentation fixes for 8.x.

2024-08-02  Mintsuki  <mintsuki@protonmail.com>

    *** Release 8.0.0 ***

    Noteworthy changes compared to the previous release, 7.13.3:

    New features:
        - Add loongarch64 support.

    Bug fixes:
        - Limine boot protocol: Ensure higher half direct map size does not
          exceed MAXPHYADDR on x86.

    Miscellaneous:
        - Extensive changes to the config syntax. (See CONFIG.md).
        - Rename term_wallpaper, term_wallpaper_style, and term_backdrop config
          options to remove the term_ prefix.
        - Removed support for GZ-compressed files (and internal Limine
          protocol modules).

2024-08-02  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.13.3 ***

    Noteworthy changes compared to the previous release, 7.13.2:

    Bug fixes:
        - Limine boot protocol: Fix broken comparison that could cause an HHDM
          too large to not be properly detected.
        - Limine boot protocol: aarch64: Fix incorrect macro value that would
          cause the size of the higher half to be incorrectly detected as half.

    Miscellaneous:
        - Remove Nix flake stuff from repository/tarball.

2024-07-30  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.13.2 ***

    Noteworthy changes compared to the previous release, 7.13.1:

    Bug fixes:
        - Limine boot protocol: Fix a bug introduced in 7.13.0 that made
          compressed modules not work on IA-32 ports.

2024-07-29  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.13.1 ***

    Noteworthy changes compared to the previous release, 7.13.0:

    Bug fixes:
        - Limine boot protocol: Fix a bug introduced in 7.13.0 that made the
          protocol unusable with the BIOS port when loading any modules, when
          Limine was linked using ld.bfd.

2024-07-29  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.13.0 ***

    Noteworthy changes compared to the previous release, 7.12.1:

    New features:
        - Limine boot protocol: Allow above-4GiB load of modules on IA-32
          ports.

    Miscellaneous:
        - Build system improvements.

2024-07-27  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.12.1 ***

    Noteworthy changes compared to the previous release, 7.12.0:

    Miscellaneous:
        - Limine boot protocol: limit the HHDM size to half of the higher half
          in all conditions; limit HHDM KASLR wiggle room to a quarter rather
          than half of the higher half.
        - Build system improvements.

2024-07-21  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.12.0 ***

    Noteworthy changes compared to the previous release, 7.11.0:

    New features:
        - Reinstate support for ext2/3/4, albeit in an unsupported and
          unmaintained state, at least for the time being.
        - Menu: Add vertical bars around entry title in entry editor.
        - Menu: Add clearer indications of what is wrong when config invalid or
          missing.

    Bug fixes:
        - Terminal: Fix long standing wallpaper drawing related bug that under
          certain circumstances could cause memory corruption.
        - Miscellaneous VBE related bug fixes.
        - Miscellaneous A20 line related improvements/fixes.

    Miscellaneous:
        - Limine boot protocol: perform appropriate checks to ensure that the
          higher half direct map fits in the higher half; enforce paging modes
          as needed.
        - Limine boot protocol: aarch64: Specify that the granule size for both
          TTBR0_EL1 and TTBR1_EL1 is 4KiB.
        - Limine boot protocol: aarch64: Specify the values of TCR_EL1.T0SZ and
          TCR_EL1.T1SZ depending on the paging mode used.
        - Limine boot protocol: aarch64: Specify the condition of TTBR0_EL1 and
          TTBR1_EL1 at entry.

2024-07-18  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.11.0 ***

    Noteworthy changes compared to the previous release, 7.10.3:

    New features:
        - Limine boot protocol: Specify and implement "firmware type" feature.
        - Limine boot protocol: Specify and implement revision 1 "paging mode"
          request extension.

2024-07-16  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.10.3 ***

    Noteworthy changes compared to the previous release, 7.10.2:

    Bug fixes:
        - Menu: Fix high menu entry count support that was previously broken in
          a regression.
        - Linux boot protocol: Install "memory reservation" EFI configuration
          table on aarch64/riscv64.

    Miscellaneous:
        - Miscellaneous improvements and optimisations of code introduced in
          version 7.10.2.

2024-07-14  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.10.2 ***

    Noteworthy changes compared to the previous release, 7.10.1:

    Bug fixes:
        - Fix a long standing issue with volume detection on UEFI.
        - Fix issue returning to editor after a panic when coming from a blank
          entry without a valid config.
        - Add missing "loading" prints when booting Linux on non-x86.

2024-07-12  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.10.1 ***

    Noteworthy changes compared to the previous release, 7.10.0:

    Bug fixes:
        - DTB: Never pass UEFI DTB buffer directly; fix misuse of libfdt API.

2024-07-12  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.10.0 ***

    Noteworthy changes compared to the previous release, 7.9.2:

    New features:
        - SMP: Support SMP on AArch64 without ACPI.

    Bug fixes:
        - SMP: Do not allocate a useless stack for the BSP.
        - `limine`: Protect against overwriting MBR partitions beginning at
          exceedingly low sector values (outside de facto specification).

    Miscellaneous:
        - Limine boot protocol: Do not pass responses if RSDP or SMBIOS not
          available instead of returning responses with NULL pointers.
        - Limine boot protocol: Do not pass a framebuffer response if no
          framebuffers are available.

2024-07-06  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.9.2 ***

    Noteworthy changes compared to the previous release, 7.9.1:

    Bug fixes:
        - Limine boot protocol: Return NULL response instead of a response with
          erroneous CPU count of 0 for SMP on x86-64, if x2APIC support not
          enabled and missing xAPIC fallback.
        - Limine boot protocol: Do not ignore MAX_PAGING_MODE config setting if
          paging mode request missing from loaded kernel.

    Miscellaneous:
        - Limine boot protocol/ELF: Apply a slide of 0xffffffff80000000 minus
          the ELF-reported base load address for relocatable kernels that have
          lower half load addresses, instead of always applying a slide of
          0xffffffff80000000.

2024-06-29  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.9.1 ***

    Noteworthy changes compared to the previous release, 7.9.0:

    Bug fixes:
        - `limine`: Revert change that marked protective MBR wrapper partition
          as active on GPT.

2024-06-28  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.9.0 ***

    Noteworthy changes compared to the previous release, 7.8.0:

    New features:
        - Linux boot protocol: Add support on aarch64 and riscv64.

    Bug fixes:
        - multiboot1/2: Relax ELF file type requirements (mainly for multiboot2
          relocatable kernels).
        - UEFI: Fix bug that caused delete key to behave as if it was backspace
          even when the SERIAL config option was not "yes".

    Miscellaneous:
        - Limine boot protocol/ELF: Do not consider ELFs relocatable unless the
          ELF file type is ET_DYN.
        - Some dead code removal.

2024-06-24  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.8.0 ***

    Noteworthy changes compared to the previous release, 7.7.2:

    New features:
        - Return to booted edited entry on panic.

    Bug fixes:
        - `limine`: Mark protective MBR wrapper partition as active on GPT.

    Miscellaneous:
        - UEFI: Allocate most memory as EfiLoaderCode instead of EfiLoaderData.
        - Smaller fixes and improvements.

2024-06-09  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.7.2 ***

    Noteworthy changes compared to the previous release, 7.7.1:

    Bug fixes:
        - Limine boot protocol/ELF: Ignore PT_LOAD segments with 0 memory size.
        - Limine boot protocol/ELF: Panic on non-weak unresolved symbols.
        - Limine boot protocol/ELF: Do not sanity check DT_RELAENT size for non
          DT_RELA relocations. This is because DT_RELAENT may not be present.
        - multiboot 1 and 2 protocols: Reject relocatable ELFs.

2024-06-06  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.7.1 ***

    Noteworthy changes compared to the previous release, 7.7.0:

    Bug fixes:
        - Limine boot protocol/ELF: Stop parsing PT_DYNAMIC segment once
          DT_NULL is reached.

2024-06-04  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.7.0 ***

    Noteworthy changes compared to the previous release, 7.6.0:

    New features:
        - Limine boot protocol/ELF: Add support for GLOB_DAT, JUMP_SLOT, 64,
          and NONE relocation types.
        - Limine boot protocol/ELF: Add RELR (packed relative relocations)
          support.

    Bug fixes:
        - Limine boot protocol/ELF: Reject ELFs that depend on external
          dynamically linked libraries.

    Miscellaneous:
        - Bring back .xz compressed release tarball.

2024-06-01  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.6.0 ***

    Noteworthy changes compared to the previous release, 7.5.3:

    New features:
        - RISC-V: Add support for RISC-V systems without ACPI (using DTBs).

2024-05-24  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.5.3 ***

    Noteworthy changes compared to the previous release, 7.5.2:

    Bug fixes:
        - Multiboot 2 protocol: Fix an issue where the 32-bit EFI Image Handle
          tag would be generated under 64-bit EFI and vice versa.
        - Do not set VirtualStart to PhysicalStart when generating the EFI
          memory map; set it to 0 instead.
        - Do not perform additional checks when loading relocatable ELF files
          after verifying that they are of type ET_DYN and have a PT_DYNAMIC
          segment. This ensures that certain relocatable ELF files that were
          previously misidentified as non-relocatable are recognised as such.

2024-05-22  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.5.2 ***

    Noteworthy changes compared to the previous release, 7.5.1:

    Bug fixes:
        - Fix missing checks in the FAT filesystem driver that could cause
          divide-by-0 exceptions when parsing malformed/corrupted filesystems.
        - Limine boot protocol: Do not reject relocatable kernels with ELF PHDR
          load addresses at or around 0, instead slide them all the way to the
          topmost 2GiB (0xffffffff80000000). This allows setting a base load
          address of 0 in LD BFD/LLD linker scripts which makes LD BFD (the
          default GNU LD) actually emit an ELF with ET_DYN type.

2024-05-08  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.5.1 ***

    Noteworthy changes compared to the previous release, 7.5.0:

    Bug fixes:
        - Workarounds for issues related to drive iteration on BIOS. Discovered
          on an HP Pavilion dv6-3152er.

2024-05-03  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.5.0 ***

    Noteworthy changes compared to the previous release, 7.4.1:

    New features:
        - Limine boot protocol: Add support for requests start marker, to
          complement the previously called delimiter, now renamed to "end
          marker".
        - Limine boot protocol: Add base revision 2. The sole difference
          compared to base revision 1 being that it mandates bootloaders to
          support request delimiters.

    Bug fixes:
        - Fix an issue regarding commit date parsing in the bootstrap script.

    Miscellaneous:
        - General documentation updates and improvements; split USAGE.md from
          README.md and install the former only.

2024-04-29  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.4.1 ***

    Noteworthy changes compared to the previous release, 7.4.0:

    Miscellaneous:
        - Bump max volume limit for UEFI from 64 to 256.
        - Improve how ISA name and firmware type is reported as part of the
          default branding.

2024-04-20  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.4.0 ***

    Noteworthy changes compared to the previous release, 7.3.1:

    New features:
        - ISA name and firmware type is now printed as part of the default
          bootloader branding.
        - Add 'B' key shortcut to menu to open up a blank entry.

    Bug fixes:
        - Fix missing NULL pointer check in configuration related function.

    Miscellaneous:
        - Console has been removed.

2024-04-11  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.3.1 ***

    Noteworthy changes compared to the previous release, 7.3.0:

    Bug fixes:
        - Fix a minor issue with scrolling when using the EFI console fallback.

    Miscellaneous:
        - Bump the Flanterm revision to current latest.
        - Some dead code removal.

2024-03-31  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.3.0 ***

    Noteworthy changes compared to the previous release, 7.2.1:

    New features:
        - Limine boot protocol: Add a `MAX_PAGING_MODE` configuration option
          to override kernel/bootloader selected paging mode.

    Bug fixes:
        - Fix a couple of minor bugs with the 4GiB workaround introduced in
          version 7.2.1.

    Miscellaneous:
        - No longer produce xz compressed release tarballs. Add bzip2, lzip,
          and zstd as alternatives in its place.

2024-03-28  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.2.1 ***

    Noteworthy changes compared to the previous release, 7.2.0:

    Bug fixes:
        - Implement workaround to allow Limine loaded above 4GiB by UEFI on
          x86-64 to work in some configurations, instead of panicking.

2024-03-24  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.2.0 ***

    Noteworthy changes compared to the previous release, 7.1.0:

    New features:
        - Add support for remembering the last booted entry on UEFI by means
          of the `REMEMBER_LAST_ENTRY` config option.

2024-03-19  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.1.0 ***

    Noteworthy changes compared to the previous release, 7.0.5:

    New features:
        - Limine boot protocol: Add support for requests delimiter.

    Bug fixes:
        - Fixed a potential security vulnerability in the ISO9660 driver.

2024-02-15  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.0.5 ***

    Noteworthy changes compared to the previous release, 7.0.4:

    Bug fixes:
        - Build system related fixes and improvements. This fixes an issue that
          caused Limine 7.0.4 to fail building on Busybox systems.

2024-02-14  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.0.4 ***

    Noteworthy changes compared to the previous release, 7.0.3:

    Bug fixes:
        - Minor build system related fixes and improvements.

    Miscellaneous:
        - Significantly improve reproducibility of builds.

2024-02-08  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.0.3 ***

    Noteworthy changes compared to the previous release, 7.0.2:

    Bug fixes:
        - multiboot2 protocol: Do not panic if there is a ENTRY_ADDRESS_EFI64
          tag, but there is a valid alternative entry point. This further aligns
          our behaviour with GRUB2.

    Miscellaneous:
        - Terminal: Significantly improve serial and fallback UEFI console's
          rendition (especially colour palettes).
        - Serial: Add a baud rate config setting for Limine's BIOS version.

2024-01-26  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.0.2 ***

    Noteworthy changes compared to the previous release, 7.0.1:

    Bug fixes:
        - Fix a cosmetic bug in the menu where, when the editor was disabled,
          the controls showed "ENTER Expand" even for boot entries instead of
          only for menu directories.

    Miscellaneous:
        - Exclusively use git for obtaining dependencies in "bootstrap" script.

2024-01-22  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.0.1 ***

    Noteworthy changes compared to the previous release, 7.0.0:

    Bug fixes:
        - Fix ARM64/aarch64 spinup code to properly support Apple Silicon
          chips.
        - Prevent users from building Limine with a GNU Make version older than
          4.2, as that is not supported, by gracefully erroring out with a
          useful error message.
        - Avoid usage of reserved C identifiers in certain cases.

    Miscellaneous:
        - Drop usage of "libgcc-binaries" for "cc-runtime". This finally makes
          us able to ship Limine tarballs without included binary blobs, and
          should improve compatibility with more obscure toolchain set ups.

2024-01-14  Mintsuki  <mintsuki@protonmail.com>

    *** Release 7.0.0 ***

    Noteworthy changes compared to the previous release, 6.20240107.0:

    Bug fixes:
        - Minor fix of newline handling when reading user input lines.

    Miscellaneous:
        - Bump major version to 7. Note: There is no breaking change in 7.x
          compared to 6.x; the major version bump is done due to a change in
          the versioning scheme used by Limine (move to proper Semantic
          Versioning).
        - Fix versions of external dependencies in "bootstrap" script.

2024-01-07  Mintsuki  <mintsuki@protonmail.com>

    *** Release 6.20240107.0 ***

    Noteworthy changes compared to the previous release, 6.20231227.0:

    New features:
        - Limine boot protocol: Add support for compressed internal modules.

    Miscellaneous:
        - Improve error reporting from host "limine" executable.
        - Track "master" branch of stb_image upstream.

2023-12-27  Mintsuki  <mintsuki@protonmail.com>

    *** Release 6.20231227.0 ***

    Noteworthy changes compared to the previous release, 6.20231226.0:

    Bug fixes:
        - Actually regenerate build system with GNU Autoconf 2.72 instead of
          GNU Autoconf 2.71.

2023-12-26  Mintsuki  <mintsuki@protonmail.com>

    *** Release 6.20231226.0 ***

    Noteworthy changes compared to the previous release, 6.20231216.0:

    New features:
        - Ignore trailing whitespace in Limine config file.

    Miscellaneous:
        - Regenerate build system with GNU Autoconf 2.72.
        - Minor build system adjustments.

2023-12-16  Mintsuki  <mintsuki@protonmail.com>

    *** Release 6.20231216.0 ***

    Noteworthy changes compared to the previous release, 6.20231210.0:

    New features:
        - Added a `--print-datadir` switch to the `limine` program in order
          to print the directory where Limine files are stored when installed
          on a host distro.

    Miscellaneous:
        - General improvements to the `--help` texts for the `limine` program.

2023-12-10  Mintsuki  <mintsuki@protonmail.com>

    *** Release 6.20231210.0 ***

    This is the first release in the 6.x series.

    Breaking changes compared to the 5.x series:

    - Support for the unmaintained ext2/3/4 filesystems dropped in compliance
      with the Limine bootloader design philosophy.
    - Chainloading protocol split into 2 protocols: EFI chainloading and BIOS
      chainloading.

2023-12-07  Mintsuki  <mintsuki@protonmail.com>

    *** Release 5.20231207.1 ***

    Noteworthy changes compared to the previous release, 5.20231207.0:

    Bug fixes:
        - multiboot2/elf: Fix issue where ELF vaddrs were taken into account
          instead of paddrs when loading executables.
        - Fix implementation of a function that detects whether a given memory
          range is physical RAM.

2023-12-07  Mintsuki  <mintsuki@protonmail.com>

    *** Release 5.20231207.0 ***

    Noteworthy changes compared to the previous release, 5.20231124.0:

    New features:
        - multiboot2 protocol: Add support for relocatable header tag.
        - multiboot2 protocol: Add support for console flags header tag.
        - Limine protocol: Add support for EFI memory map feature.

    Miscellaneous:
        - Improve error reporting from host "limine" executable.
        - Do not ignore errors from mtools when building limine-uefi-cd.bin.

2023-11-24  Mintsuki  <mintsuki@protonmail.com>

    *** Release 5.20231124.0 ***

    Compared to previous release, 5.20231121.0:

    New features:
        - Add support for rebooting to UEFI firmware setup.

    Bug fixes:
        - Fix SMP (multiprocessor) initialisation regression on aarch64.

    Miscellaneous:
        - Move to new, handwritten ChangeLog from autogenerated one.