Changelog.md

WhateverGreen Changelog

v1.3.9

• Added igfxdumpdelay boot argument to delay -igfxdump in ms
• Partially fix ICL framebuffer patching
• Add support to injecting Force_Load_FalconSMUFW from OpenCore
• Disabled automatic enabling of GVA for Polaris on 10.13 and lower
• Replaced -radnogva argument with radgva=0/1 to force GVA for Polaris
• Added wegtree=1 boot argument (rebuild-device-tree property) to force device renaming on Apple FW

v1.3.8

• Added igfxfw=2 boot argument and igfxfw IGPU property to load Apple GuC firmware
• Added igfxpavp=1 boot argument (and igfxpavp property) to force enable PAVP output
• Added igfxfcms=1 boot argument (and complete-modeset property) on Skylake and Apple
• Improved performance with Lilu 1.4.3 APIs
• Added -igfxfbdbg boot argument to debug IGPU framebuffer (debug builds only)
• Added igfxagdc=0 boot argument and disable-agdc IGPU property to disable AGDC
• Added igfxonln=1 boot argument and force-online IGPU property force online status for all displays
• Added igfxonlnfbs=MASK boot argument and force-online-framebuffers IGPU property to override display status

v1.3.7

• Improved the maximum link rate fix: Now correct the value read from extended DPCD as well. (by @0xFireWolf)
• Improved firmware loading handling on 10.15.4 (may fix booting issues on KBL+)
• Improved support for Comet Lake IGPUs (thx @stormbirds)

v1.3.6

• Enabled CoreLSKD streaming patches by default for AMD hardware DRM on Ivy Bridge
• Repurposed 64 bit for FP 2.x streaming hardware accelerated streaming patches (can be used as shikigva=80)
• Fixed accelerator name update logic for X4xxx kexts
• Fixed Verde IOGVACodec injection to make hardware video decoder work
• Enable software TV+ decoding on all CPUs without IGPU (shikigva=256)
• Added HEVC capabilities to AMD6 decoders for all GPUs (disabled by -radnogva or disable-gva-support)
• Added HW decoder device-id spoofing via -radcodec boot-arg, by @osy86

v1.3.5

• Added Lilu 1.4.0 support, which is now the minimum supported version
• Dropped legacy boot arguments (-shikigva, -shikifps)
• Fixed handling agdpmod GPU property (in IGPUs and in conjunction with boot-arg)
• Added -wegtree boot argument to force device renaming
• Fixed FairPlay DRM playback patches on 10.15
• Added shikigva and shiki-id aliases in IORegistry
• Added applbkl aliases to IORegistry (data, 32-bit)
• Added applbkl-name and applbkl-data IORegistry data keys to provide custom backlight data
• Fixed applying CoreFP patches on Apple firmware, when they are not needed
• Added shikigva=16 (repurposed) property to use AMD hardware DRM decoder in select apps
• Added shikigva=128 (repurposed) property to use hardware decoder for FairPlay 1.0 (can be used as shikigva=144)
• Do not disable DRM patches when shikigva is used even on Apple hardware for MacPro5,1 support

v1.3.4

• Added support for disabled AppleGraphicsDevicePolicy in AMD drivers on 10.15.1
• Added basic support for -radcfg and -radgl on AMD Navi GPUs

v1.3.3

• Rework backlight panel info injection to fix Mac issues

v1.3.2

• Added more GPUs for detection
• Enable IGPU graphics kernel panic workaround on 10.14.4+ on SKL

v1.3.1

• Fixed an issue that LSPCON driver fails to set the mode after the adapter power is off, i.e. sleep/wake up cycle.
• Unified release archive names
• Enforce complete IGPU modeset on Kaby Lake and newer (overridable by igfxfcmsfbs bootarg or complete-modeset-framebuffers device property)
• Disable VRAM testing on AMD GPUs on 10.14.4+ (based on vladie's patch)

v1.3.0

• Fixed custom connector support for Radeon GPUs, thx @lwfitzgerald
• Added disable-gfx-submit property to back ngfxsubmit=0 boot argument
• Added GuC firmware loading patch for latest SKL+ drivers
• Allow loading on 10.15 without -lilubetaall
• Disabled NVIDIA performance fix on 10.15, as it now is built-in
• Enable HDMI 2.0 patches on 10.14+ (Use at own risk in case of undiscovered change)
• Added CFL graphics kernel panic workaround on 10.14.4+
• Added infinite loop fix when calculating dividers for Intel HDMI connections on SKL, KBL and CFL platforms.
• Added driver support for onboard LSPCON chips to enable DisplayPort to HDMI 2.0 output on Intel IGPUs (by @0xFireWolf)

v1.2.9

• Added AMD Radeon VII to detected list
• Disabled automatic framebuffer usage on Polaris GPUs
• Added preserve-names device property to preserve current GPU names
• Added AppleVPA patching support, replaces NoVPAJpeg.kext (thx CMMChris and uglyJoe)

v.1.2.8

• Added KBL graphics kernel panic workaround on 10.14.4+
• Added IGPU DPCD link incompatible rate patch (thanks @0xFireWolf)

v1.2.7

• Added more IGPU device-ids to detected list

v1.2.6

• Added applbkl=0 boot argument to termporarily disable AppleBacklight patching code
• Fixed AMD Verde CAIL injection logic
• Fixed breaking backlight on Apple hardware, on laptops with AMD GPUs, and on 10.11 or earlier
• Changed CFL backlight patches to enable by default on CFL drivers only (avoids issues with faux "KBL" 8xxx CPUs)

v1.2.5

• Added support for specifying agpmod in external GPU properties
• Added fatal error on agpmod=cfgmap on 10.14 and newer, which had no effect since 10.13.4
• Added igfxcflbklt boot argument and enable-cfl-backlight-fix property to fix CFL backlight
• Added max backlight frequency override via max-backlight-freq IGPU property on CFL
• Added framebuffer-camellia and framebuffer-flags patching
• Added AppleBacklight patching code (based on AppleBacklightFixup by hieplpvip)
• Added NVIDIA HDMI enabling code for firmwares that disable it by default (thanks @Fraxul)
• Enabled CFL backlight patches by default on laptops with CFL graphics
• Fixed SNB IGPU HDMI automatic patching
• Fix multiple AMD GPU support improperly handling configuration properties

v1.2.4

• Added platform list dumping to ioreg (at IOService:/IOResources/WhateverGreen), debug build only with -igfxfbdump
• Fixed 10.14.1 IGPU KBL/CFL support without external GPU
• Fixed warning about legacy processors (e.g. Xeon)
• Fixed the support for providing custom names on Radeon RX models

v1.2.3

• Added framebuffer-cursormem IGPU patch support (Haswell specific)
• Added framebuffer-conX-XXXXXXXX-alldata IGPU patch support (platform-id specific conX-alldata)
• Changed AGDP patch defaults to vit+pikera patch
• Fixed semantic patches for Coffee Lake when it pretends to be Kaby

v1.2.2

• Added framebuffer-conX-alldata IGPU patch support
• Fixed automatic frame selection with -wegnoegpu boot-arg or disable-external-gpu IGPU property (Lilu 1.2.7 or newer)

v1.2.1

• Added -wegnoegpu boot-arg and disable-external-gpu IGPU property to kill external GPU
• Fixed IGPU framebuffer patches (requires Lilu 1.2.6)
• Fixed -shikioff not working (note, -liluuseroff may be more handy)
• Fixed loading on 10.8 and 10.9
• Fixed device property reading for AMD CAIL overrides
• Recovered GuC loading for internal usage (do NOT use, causes freezes and crashes)
• Disabled HDMI 2.0 by default, use -cdfon boot-arg or enable-hdmi20 IGPU/GFX0 property to enable

v1.2.0

• Merged GPU kexts into one (AMD, Intel, NVIDIA) including H/W acceleration (Shiki)
• Added binary and structural Intel framebuffer patches (thx to headkaze)
• Added Intel CFL support
• Fixed certain AMD multimonitor issues
• Enabled 10.14 support by default

v1.1.8

• Added more GPU models to automatic detection
• Hardened solved symbol verification to avoid panics with broken kext cache
• Fixed compiling with older Xcode

v1.1.7

• Added -radgl boot argument to disable Metal support
• Disabled a few more unnecessary patches for 10.13.4

In order to boot with -radgl you may need to set the defaults:

sudo defaults write /Library/Preferences/com.apple.CoreDisplay useMetal -boolean no
sudo defaults write /Library/Preferences/com.apple.CoreDisplay useIOP -boolean no

v1.1.6

• Ensure proper GFX0 and HDAU renaming

v1.1.5

• Added more GPU models to automatic detection (including new names from 10.13.4)
• Added automatic CFG_USE_AGDC disabling to avoid constant issues with 4K display sleep and broken HDMI/DP ports

v1.1.4

• Added automatic screen boot artifact correction (-radlogo is no longer necessary and is removed)
• Added automatic CFG_FB_LIMIT correction to avoid issues on several Polaris GPUs on 10.13

v1.1.3

• Added more GPU models to automatic detection
• Added -rad4200 option to fix freezes and possibly improve the performance of Radeon Pro 560 on 10.13

v1.1.2

• Enabled the kext in installer and recovery by default
• Improved controller start debugging

v1.1.1

• Added more GPU models to automatic detection
• Rename GPU name to GFX0 only if it does not start with GFX prefix
• Added -radnoaudio boot argument to avoid DP/HDMI audio autoenabling
• Added no-audio-autofix gpu controller property to avoid DP/HDMI audio autoenabling

v1.1.0

• Requires Lilu 1.2.0 or newer
• Added more GPU models to automatic detection
• Fixed GPU controller name to GFX0 if not already changed
• Fixed HDMI audio initialising even when the kext is disabled

v1.0.4

• Added more GPU models to automatic detection
• Initial Vega series support
• Fixed minor issues in HDMI audio enabling code

v1.0.3

• Fixed radpg bit mask working incorrectly
• Added manual tuning of aty_config, aty_properties, and cail_properties via ACPI
• Changed HDMI audio layout-id to match HDEF layout-id if available

v1.0.2

• Added more GPU models to automatic detection
• Added basic automatic HDMI audio correction
• Fixed WhateverName os version requirements
• Disabled connector ordering by default (use connector-priority if needed)
• Changed connector-priority default type importance
• Added version info for easier debugging

v1.0.1

• Added more GPU models to automatic detection
• Disabled DVI transmitter changes by default (use -raddvi boot-arg)
• Added IOAccelDeviceGetName correction
• Added libWhateverName.dylib with an app for GPU GL/Compute/Metal engine name correction

v1.0.0

• Initial release