| layout | documentation |
|---|---|
| title | 36511 - ZWave |
{% include base.html %}
This describes the Z-Wave device 36511, manufactured by Good Way Technology Co., Ltd with the thing type UID of goodway_36511_00_000.
The device is in the category of Light Bulb, defining Devices that illuminate something, such as bulbs, etc..
The 36511 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
This RGBW Dimmer Module enables remote control of your LED light strips, dimmable bulbs, and halogen bulbs. When included in your Z-Wave® mesh network, you can easily adjust the brightness and intensity of the lights. The dimmer is small and lightweight, making it easier to fit into junction boxes and tight spaces.
Press the include button three times within 2 seconds or use the auto inclusion feature after powering up.
Press the exclude button three times within 2 seconds.
The following table summarises the channels available for the 36511 -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|---|---|---|---|
| Switch [Deprecated] | switch_binary | switch_binary | Switch | Switch |
| Dimmer | switch_dimmer | switch_dimmer | DimmableLight | Dimmer |
| Color Control | color_color | color_color | ColorLight | Color |
| Color Temperature | color_temperature | color_temperature | ColorLight | Dimmer |
Switch the power on and off.
The switch_binary channel is of type switch_binary and supports the Switch item and is in the Switch category.
Note: This channel is marked as deprecated so should not be used.
The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.
The switch_dimmer channel is of type switch_dimmer and supports the Dimmer item and is in the DimmableLight category.
The color channel allows to control the color of a light. It is also possible to dim values and switch the light on and off.
The color_color channel is of type color_color and supports the Color item and is in the ColorLight category.
The color temperature channel allows to set the color temperature of a light from 0 (cold) to 100 (warm).
The color_temperature channel is of type color_temperature and supports the Dimmer item and is in the ColorLight category.
The following table provides a summary of the 12 configuration parameters available in the 36511. Detailed information on each parameter can be found in the sections below.
| Param | Name | Description |
|---|---|---|
| 1 | Input IN1 | Input IN1 |
| 2 | Input IN2 | Input IN2 |
| 3 | Input IN3 | Input IN3 |
| 4 | Input IN4 | Input IN4 |
| 5 | Auto Scene Mode Set | Auto Scene Mode Set |
| 6 | Auto Scene Mode Duration | Auto Scene Mode Duration |
| 7 | Memeory Device Status | Memeory Device Status at Power Cut |
| 10 | Max Dimming Value | Max Dimming Value |
| 11 | Min Dimming Value | Min Dimming Value |
| 12 | Dimming Time Soft ON/OFF | Dimming Time Soft ON/OFF |
| 13 | Dimming Time when key pressed | Dimming Time when key pressed |
| 14 | Dimmer Mode | Dimmer Mode |
Input IN1
Values in the range 1 to 9 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_1_1 and is of type INTEGER.
Input IN2
Values in the range 1 to 9 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_2_1 and is of type INTEGER.
Input IN3
Values in the range 1 to 9 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_3_1 and is of type INTEGER.
Input IN4
Values in the range 1 to 9 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_4_1 and is of type INTEGER.
Auto Scene Mode Set
Values in the range 0 to 6 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_5_1 and is of type INTEGER.
Auto Scene Mode Duration 1-127=1-127 seconds
1001-1127=1-127 minutes Values in the range 1 to 1127 may be set.
The manufacturer defined default value is 3.
This parameter has the configuration ID config_6_2 and is of type INTEGER.
Memeory Device Status at Power Cut
Values in the range 0 to 1 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_7_1 and is of type INTEGER.
Max Dimming Value
Values in the range 2 to 99 may be set.
The manufacturer defined default value is 99.
This parameter has the configuration ID config_10_1 and is of type INTEGER.
Min Dimming Value
Values in the range 1 to 98 may be set.
The manufacturer defined default value is 1.
This parameter has the configuration ID config_11_1 and is of type INTEGER.
Dimming Time Soft ON/OFF
Values in the range 5 to 25 may be set.
The manufacturer defined default value is 10.
This parameter has the configuration ID config_12_1 and is of type INTEGER.
Dimming Time when key pressed
Values in the range 1 to 127 may be set.
The manufacturer defined default value is 5.
This parameter has the configuration ID config_13_1 and is of type INTEGER.
Dimmer Mode
Values in the range 0 to 3 may be set.
The manufacturer defined default value is 0.
This parameter has the configuration ID config_14_1 and is of type INTEGER.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The 36511 supports 1 association group.
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 1 node.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_SWITCH_BINARY_V1 | |
| COMMAND_CLASS_SWITCH_MULTILEVEL_V2 | Linked to BASIC |
| COMMAND_CLASS_SWITCH_COLOR_V2 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_CONFIGURATION_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.