CES2022/BME680GasRTC.ino at main · strikerdlm/CES2022 · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
//Code developed by Diego Malpica, as Environmental Sensor for space habitats

#include <TFT_eSPI.h>
#include "seeed_bme680.h"
#include <SPI.h>
#include <Seeed_FS.h>
#include "SD/Seeed_SD.h"
#include "CO2Sensor.h"
#include "RTC_SAMD51.h"
#include "DateTime.h"

#define BME_SCK 13
#define BME_MISO 12
#define BME_MOSI 11
#define BME_CS 10
#define IIC_ADDR  uint8_t(0x76)

CO2Sensor co2Sensor(A0, 0.99, 100);

Seeed_BME680 bme680(IIC_ADDR); /* IIC PROTOCOL */
//Seeed_BME680 bme680;             /* SPI PROTOCOL */
//Seeed_BME680 bme680(BME_CS, BME_MOSI, BME_MISO,  BME_SCK);/*SPI PROTOCOL*/

RTC_SAMD51 rtc;
TFT_eSPI tft;
// Stock font and GFXFF reference handle
TFT_eSprite spr = TFT_eSprite(&tft);  // Sprite

File myFile;

void setup() {
  // put your setup code here, to run once:
  pinMode(WIO_LIGHT, INPUT);
  rtc.begin();
  tft.begin();
  tft.setRotation(3);
  spr.createSprite(tft.width(),tft.height());
  Serial.begin(115200);
//  while (!Serial);
//  Serial.println("Serial start!!!");
//  delay(100);
  co2Sensor.calibrate();
  while (!bme680.init()) {
      //Serial.println("bme680 init failed ! can't find device!");
      delay(10000);
   }
  SD.begin(SDCARD_SS_PIN, SDCARD_SPI);
  myFile = SD.open("Envir.csv", FILE_WRITE);
  DateTime now = DateTime(F(__DATE__), F(__TIME__));
  Serial.println("adjust time!");
  rtc.adjust(now);

  now = rtc.now();
}

void loop() {
  // put your main code here, to run repeatedly:
  int val;
  DateTime now = rtc.now();
  int light = analogRead(WIO_LIGHT);
  spr.fillSprite(TFT_BLACK);
  spr.setFreeFont(&FreeSansBoldOblique18pt7b);
  spr.setTextColor(TFT_RED);
  spr.drawString("SpaceAnalog", 60 - 15, 10 , 1);// Print the test text in the custom font
  for(int8_t line_index = 0;line_index < 5 ; line_index++)
  {
    spr.drawLine(0, 50 + line_index, tft.width(), 50 + line_index, TFT_GREEN);
  }

  spr.setFreeFont(&FreeSansBoldOblique9pt7b);                 // Select the font
  // BME680 sensor
  if (bme680.read_sensor_data()) {
        Serial.println("Failed to perform reading :(");
        return;
    }
  spr.setTextColor(TFT_WHITE);
  spr.drawString("Temp:", 60 - 24, 100 -24 , 1);// Print the test text in the custom font
  spr.drawRoundRect(60 - 24,100,80,40,5,TFT_WHITE);
  spr.setTextColor(TFT_WHITE);
  spr.drawNumber(bme680.sensor_result_value.temperature,60 - 20,100+10,1);
  spr.setTextColor(TFT_GREEN);
  spr.drawString("C", 60 + 12, 100+8, 1);
  int co2 = co2Sensor.read();

// Baro
  spr.setTextColor(TFT_WHITE);
  spr.drawString("Barometer:", 230 -24 , 100 - 24 , 1);// Print the test text in the custom font
  spr.drawRoundRect(230 - 24,100,100,40,5,TFT_WHITE);
  spr.setTextColor(TFT_WHITE);
  spr.drawNumber((bme680.sensor_result_value.pressure / 1000)*7.5006168,230 - 20,100+10,1);
  spr.setTextColor(TFT_GREEN);
  spr.drawString("mmHg", 230 + 12, 100+8, 1);


//  HR%
  spr.setTextColor(TFT_WHITE);
  spr.drawString("HR%:", 60 - 24, 180 -24 , 1);// Print the test text in the custom font
  spr.drawRoundRect(60 - 24,180,80,40,5,TFT_WHITE);
  spr.setTextColor(TFT_WHITE);
  spr.drawNumber(bme680.sensor_result_value.humidity,60 - 20,180+10,1);
  spr.setTextColor(TFT_GREEN);
  spr.drawString("%", 60 + 12, 180+8, 1);
  SD.begin(SDCARD_SS_PIN, SDCARD_SPI);
  myFile = SD.open("Envir.csv", FILE_APPEND);
  myFile.print(now.year(), DEC);
  myFile.print('/');
  myFile.print(now.month(), DEC);
  myFile.print('/');
  myFile.print(now.day(), DEC);
  myFile.print(",");
  myFile.print(now.hour(), DEC);
  myFile.print(':');
  myFile.print(now.minute(), DEC);
  myFile.print(':');
  myFile.print(now.second(), DEC);
  myFile.print(",");
  myFile.print((bme680.sensor_result_value.pressure / 1000)*7.5006168);
  myFile.print(",");
  myFile.print(bme680.sensor_result_value.temperature);
  myFile.print(",");
  myFile.print(bme680.sensor_result_value.humidity);
  myFile.print(",");
  myFile.print(co2);
  myFile.print(",");
  myFile.print(light);
  myFile.println(",");
  myFile.close();


//CO Sensor
  spr.setTextColor(TFT_WHITE);
  spr.drawString("CO2:", 230 - 24, 180 -24 , 1);// Print the test text in the custom font
  spr.drawRoundRect(230 - 24,180,112,40,5,TFT_WHITE);
  spr.setTextColor(TFT_WHITE);
  spr.drawNumber(co2,230 - 20,180+10,1);
  spr.setTextColor(TFT_GREEN);
  spr.drawString("ppm", 230 + 12, 180+8, 1);
  spr.pushSprite(0, 0);
  delay(5000);
}