diff --git a/.gitignore b/.gitignore index 8427b2e..6aa55ea 100644 --- a/.gitignore +++ b/.gitignore @@ -1,8 +1,13 @@ *.m4 +ChangeLog +m4/ChangeLog autom4te.cache autoscan.log compile -config.* +config.guess +config.log +config.status +config.sub configure configure.scan depcomp @@ -14,7 +19,13 @@ Makefile Makefile.in missing mkinstalldirs +src/config.h +src/config.h.in *~ *.o *.pc tester +.dirstamp +stamp-h1 +po/stamp-po +po/*.gmo diff --git a/ABOUT-NLS b/ABOUT-NLS new file mode 100644 index 0000000..3cc8286 --- /dev/null +++ b/ABOUT-NLS @@ -0,0 +1,1379 @@ +1 Notes on the Free Translation Project +*************************************** + +Free software is going international! The Free Translation Project is a +way to get maintainers of free software, translators, and users all +together, so that free software will gradually become able to speak many +languages. A few packages already provide translations for their +messages. + + If you found this 'ABOUT-NLS' file inside a distribution, you may +assume that the distributed package does use GNU 'gettext' internally, +itself available at your nearest GNU archive site. But you do _not_ +need to install GNU 'gettext' prior to configuring, installing or using +this package with messages translated. + + Installers will find here some useful hints. These notes also +explain how users should proceed for getting the programs to use the +available translations. They tell how people wanting to contribute and +work on translations can contact the appropriate team. + +1.1 INSTALL Matters +=================== + +Some packages are "localizable" when properly installed; the programs +they contain can be made to speak your own native language. Most such +packages use GNU 'gettext'. Other packages have their own ways to +internationalization, predating GNU 'gettext'. + + By default, this package will be installed to allow translation of +messages. It will automatically detect whether the system already +provides the GNU 'gettext' functions. Installers may use special +options at configuration time for changing the default behaviour. The +command: + + ./configure --disable-nls + +will _totally_ disable translation of messages. + + When you already have GNU 'gettext' installed on your system and run +configure without an option for your new package, 'configure' will +probably detect the previously built and installed 'libintl' library and +will decide to use it. If not, you may have to to use the +'--with-libintl-prefix' option to tell 'configure' where to look for it. + + Internationalized packages usually have many 'po/LL.po' files, where +LL gives an ISO 639 two-letter code identifying the language. Unless +translations have been forbidden at 'configure' time by using the +'--disable-nls' switch, all available translations are installed +together with the package. However, the environment variable 'LINGUAS' +may be set, prior to configuration, to limit the installed set. +'LINGUAS' should then contain a space separated list of two-letter +codes, stating which languages are allowed. + +1.2 Using This Package +====================== + +As a user, if your language has been installed for this package, you +only have to set the 'LANG' environment variable to the appropriate +'LL_CC' combination. If you happen to have the 'LC_ALL' or some other +'LC_xxx' environment variables set, you should unset them before setting +'LANG', otherwise the setting of 'LANG' will not have the desired +effect. Here 'LL' is an ISO 639 two-letter language code, and 'CC' is +an ISO 3166 two-letter country code. For example, let's suppose that +you speak German and live in Germany. At the shell prompt, merely +execute 'setenv LANG de_DE' (in 'csh'), 'export LANG; LANG=de_DE' (in +'sh') or 'export LANG=de_DE' (in 'bash'). This can be done from your +'.login' or '.profile' file, once and for all. + + You might think that the country code specification is redundant. +But in fact, some languages have dialects in different countries. For +example, 'de_AT' is used for Austria, and 'pt_BR' for Brazil. The +country code serves to distinguish the dialects. + + The locale naming convention of 'LL_CC', with 'LL' denoting the +language and 'CC' denoting the country, is the one use on systems based +on GNU libc. On other systems, some variations of this scheme are used, +such as 'LL' or 'LL_CC.ENCODING'. You can get the list of locales +supported by your system for your language by running the command +'locale -a | grep '^LL''. + + Not all programs have translations for all languages. By default, an +English message is shown in place of a nonexistent translation. If you +understand other languages, you can set up a priority list of languages. +This is done through a different environment variable, called +'LANGUAGE'. GNU 'gettext' gives preference to 'LANGUAGE' over 'LANG' +for the purpose of message handling, but you still need to have 'LANG' +set to the primary language; this is required by other parts of the +system libraries. For example, some Swedish users who would rather read +translations in German than English for when Swedish is not available, +set 'LANGUAGE' to 'sv:de' while leaving 'LANG' to 'sv_SE'. + + Special advice for Norwegian users: The language code for Norwegian +bokma*l changed from 'no' to 'nb' recently (in 2003). During the +transition period, while some message catalogs for this language are +installed under 'nb' and some older ones under 'no', it's recommended +for Norwegian users to set 'LANGUAGE' to 'nb:no' so that both newer and +older translations are used. + + In the 'LANGUAGE' environment variable, but not in the 'LANG' +environment variable, 'LL_CC' combinations can be abbreviated as 'LL' to +denote the language's main dialect. For example, 'de' is equivalent to +'de_DE' (German as spoken in Germany), and 'pt' to 'pt_PT' (Portuguese +as spoken in Portugal) in this context. + +1.3 Translating Teams +===================== + +For the Free Translation Project to be a success, we need interested +people who like their own language and write it well, and who are also +able to synergize with other translators speaking the same language. +Each translation team has its own mailing list. The up-to-date list of +teams can be found at the Free Translation Project's homepage, +'http://translationproject.org/', in the "Teams" area. + + If you'd like to volunteer to _work_ at translating messages, you +should become a member of the translating team for your own language. +The subscribing address is _not_ the same as the list itself, it has +'-request' appended. For example, speakers of Swedish can send a +message to 'sv-request@li.org', having this message body: + + subscribe + + Keep in mind that team members are expected to participate _actively_ +in translations, or at solving translational difficulties, rather than +merely lurking around. If your team does not exist yet and you want to +start one, or if you are unsure about what to do or how to get started, +please write to 'coordinator@translationproject.org' to reach the +coordinator for all translator teams. + + The English team is special. It works at improving and uniformizing +the terminology in use. Proven linguistic skills are praised more than +programming skills, here. + +1.4 Available Packages +====================== + +Languages are not equally supported in all packages. The following +matrix shows the current state of internationalization, as of Jun 2014. +The matrix shows, in regard of each package, for which languages PO +files have been submitted to translation coordination, with a +translation percentage of at least 50%. + + Ready PO files af am an ar as ast az be bg bn bn_IN bs ca crh cs + +---------------------------------------------------+ + a2ps | [] [] [] | + aegis | | + anubis | | + aspell | [] [] [] | + bash | [] [] [] | + bfd | | + binutils | [] | + bison | | + bison-runtime | [] | + buzztrax | [] | + ccd2cue | | + ccide | | + cflow | | + clisp | | + coreutils | [] [] | + cpio | | + cppi | | + cpplib | [] | + cryptsetup | [] | + datamash | | + denemo | [] [] | + dfarc | [] | + dialog | [] [] [] | + dico | | + diffutils | [] | + dink | [] | + direvent | | + doodle | [] | + dos2unix | | + dos2unix-man | | + e2fsprogs | [] [] | + enscript | [] | + exif | [] | + fetchmail | [] [] | + findutils | [] | + flex | [] | + freedink | [] [] | + fusionforge | | + gas | | + gawk | [] | + gcal | [] | + gcc | | + gdbm | | + gettext-examples | [] [] [] [] [] | + gettext-runtime | [] [] [] | + gettext-tools | [] [] | + gjay | | + glunarclock | [] [] [] | + gnubiff | [] | + gnubik | [] | + gnucash | () () [] | + gnuchess | | + gnulib | [] | + gnunet | | + gnunet-gtk | | + gold | | + gphoto2 | [] | + gprof | [] | + gramadoir | | + grep | [] [] [] | + grub | [] | + gsasl | | + gss | | + gst-plugins-bad | [] [] | + gst-plugins-base | [] [] [] | + gst-plugins-good | [] [] [] | + gst-plugins-ugly | [] [] [] | + gstreamer | [] [] [] [] | + gtick | [] | + gtkam | [] [] | + gtkspell | [] [] [] [] [] | + guix | | + guix-packages | | + gutenprint | [] | + hello | [] | + help2man | | + help2man-texi | | + hylafax | | + idutils | | + iso_15924 | [] | + iso_3166 | [] [] [] [] [] [] [] [] [] [] | + iso_3166_2 | | + iso_4217 | [] | + iso_639 | [] [] [] [] [] [] [] [] [] | + iso_639_3 | [] [] | + iso_639_5 | | + jwhois | | + kbd | [] | + klavaro | [] [] [] [] [] | + ld | [] | + leafpad | [] [] [] [] | + libc | [] [] [] | + libexif | () | + libextractor | | + libgnutls | [] | + libgphoto2 | [] | + libgphoto2_port | [] | + libgsasl | | + libiconv | [] [] | + libidn | [] | + liferea | [] [] [] [] | + lilypond | [] [] | + lordsawar | [] | + lprng | | + lynx | [] [] | + m4 | [] | + mailfromd | | + mailutils | | + make | [] | + man-db | [] [] | + man-db-manpages | | + midi-instruments | [] [] [] | + minicom | [] | + mkisofs | [] | + myserver | [] | + nano | [] [] [] | + opcodes | | + parted | [] | + pies | | + pnmixer | | + popt | [] | + procps-ng | | + procps-ng-man | | + psmisc | [] | + pspp | [] | + pushover | [] | + pwdutils | | + pyspread | | + radius | [] | + recode | [] [] [] | + recutils | | + rpm | | + rush | | + sarg | | + sed | [] [] [] [] | + sharutils | [] | + shishi | | + skribilo | | + solfege | [] [] | + solfege-manual | | + spotmachine | | + sudo | [] [] | + sudoers | [] [] | + sysstat | [] | + tar | [] [] [] | + texinfo | [] [] | + texinfo_document | [] [] | + tigervnc | [] | + tin | | + tin-man | | + tracgoogleappsa... | | + trader | | + util-linux | [] | + ve | | + vice | | + vmm | | + vorbis-tools | [] | + wastesedge | | + wcd | | + wcd-man | | + wdiff | [] [] | + wget | [] | + wyslij-po | | + xboard | | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +---------------------------------------------------+ + af am an ar as ast az be bg bn bn_IN bs ca crh cs + 4 0 2 5 3 11 0 8 25 3 3 1 55 4 74 + + da de el en en_GB en_ZA eo es et eu fa fi fr + +--------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] [] [] | + aegis | [] [] [] [] | + anubis | [] [] [] [] [] | + aspell | [] [] [] [] [] [] [] | + bash | [] [] [] | + bfd | [] [] [] [] | + binutils | [] [] [] | + bison | [] [] [] [] [] [] [] [] | + bison-runtime | [] [] [] [] [] [] [] [] | + buzztrax | [] [] [] [] | + ccd2cue | [] [] [] [] | + ccide | [] [] [] [] [] [] | + cflow | [] [] [] [] [] | + clisp | [] [] [] [] [] | + coreutils | [] [] [] [] [] | + cpio | [] [] [] [] [] | + cppi | [] [] [] [] [] | + cpplib | [] [] [] [] [] [] | + cryptsetup | [] [] [] [] [] | + datamash | [] [] [] [] | + denemo | [] | + dfarc | [] [] [] [] [] [] | + dialog | [] [] [] [] [] [] [] [] [] | + dico | [] [] [] [] | + diffutils | [] [] [] [] [] [] | + dink | [] [] [] [] [] [] | + direvent | [] [] [] [] | + doodle | [] [] [] [] | + dos2unix | [] [] [] [] [] | + dos2unix-man | [] [] [] | + e2fsprogs | [] [] [] [] [] | + enscript | [] [] [] [] [] [] | + exif | [] [] [] [] [] [] | + fetchmail | [] () [] [] [] [] [] | + findutils | [] [] [] [] [] [] [] [] | + flex | [] [] [] [] [] [] | + freedink | [] [] [] [] [] [] [] [] | + fusionforge | [] [] [] | + gas | [] [] [] | + gawk | [] [] [] [] [] | + gcal | [] [] [] [] | + gcc | [] | + gdbm | [] [] [] [] [] | + gettext-examples | [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] | + gettext-tools | [] [] [] [] [] | + gjay | [] [] [] [] | + glunarclock | [] [] [] [] [] | + gnubiff | () [] [] () | + gnubik | [] [] [] [] [] | + gnucash | [] () () () () () () | + gnuchess | [] [] [] [] | + gnulib | [] [] [] [] [] [] [] | + gnunet | [] | + gnunet-gtk | [] | + gold | [] [] [] | + gphoto2 | [] () [] [] | + gprof | [] [] [] [] [] [] | + gramadoir | [] [] [] [] [] | + grep | [] [] [] [] [] [] [] | + grub | [] [] [] [] [] | + gsasl | [] [] [] [] [] | + gss | [] [] [] [] [] | + gst-plugins-bad | [] [] [] | + gst-plugins-base | [] [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] [] [] | + gtick | [] () [] [] [] | + gtkam | [] () [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] | + guix | [] [] | + guix-packages | | + gutenprint | [] [] [] [] | + hello | [] [] [] [] [] [] [] [] | + help2man | [] [] [] [] [] [] [] | + help2man-texi | [] [] [] | + hylafax | [] [] | + idutils | [] [] [] [] [] | + iso_15924 | [] () [] [] () [] () | + iso_3166 | [] () [] [] [] [] () [] () | + iso_3166_2 | [] () () () | + iso_4217 | [] () [] [] [] () [] () | + iso_639 | [] () [] [] () [] () | + iso_639_3 | () () () | + iso_639_5 | () () () | + jwhois | [] [] [] [] [] | + kbd | [] [] [] [] [] [] | + klavaro | [] [] [] [] [] [] [] | + ld | [] [] [] [] | + leafpad | [] [] [] [] [] [] [] [] | + libc | [] [] [] [] [] | + libexif | [] [] () [] [] | + libextractor | [] | + libgnutls | [] [] [] [] | + libgphoto2 | [] () [] | + libgphoto2_port | [] () [] [] [] [] | + libgsasl | [] [] [] [] [] | + libiconv | [] [] [] [] [] [] [] | + libidn | [] [] [] [] [] | + liferea | [] () [] [] [] [] [] | + lilypond | [] [] [] [] [] [] | + lordsawar | [] [] | + lprng | | + lynx | [] [] [] [] [] [] | + m4 | [] [] [] [] [] [] | + mailfromd | [] | + mailutils | [] [] [] [] | + make | [] [] [] [] [] | + man-db | [] [] [] [] | + man-db-manpages | [] [] | + midi-instruments | [] [] [] [] [] [] [] [] [] | + minicom | [] [] [] [] [] | + mkisofs | [] [] [] | + myserver | [] [] [] [] | + nano | [] [] [] [] [] [] [] | + opcodes | [] [] [] [] [] | + parted | [] [] [] | + pies | [] | + pnmixer | [] [] | + popt | [] [] [] [] [] [] | + procps-ng | [] [] | + procps-ng-man | [] [] | + psmisc | [] [] [] [] [] [] [] | + pspp | [] [] [] | + pushover | () [] [] [] | + pwdutils | [] [] [] | + pyspread | [] [] [] | + radius | [] [] | + recode | [] [] [] [] [] [] [] | + recutils | [] [] [] [] | + rpm | [] [] [] [] [] | + rush | [] [] [] | + sarg | [] [] | + sed | [] [] [] [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | [] [] [] | + skribilo | [] [] [] | + solfege | [] [] [] [] [] [] [] [] | + solfege-manual | [] [] [] [] [] | + spotmachine | [] [] [] [] [] | + sudo | [] [] [] [] [] [] | + sudoers | [] [] [] [] [] [] | + sysstat | [] [] [] [] [] [] | + tar | [] [] [] [] [] [] [] | + texinfo | [] [] [] [] [] | + texinfo_document | [] [] [] [] | + tigervnc | [] [] [] [] [] [] | + tin | [] [] [] [] | + tin-man | [] | + tracgoogleappsa... | [] [] [] [] [] | + trader | [] [] [] [] [] [] | + util-linux | [] [] [] [] | + ve | [] [] [] [] [] | + vice | () () () | + vmm | [] [] | + vorbis-tools | [] [] [] [] | + wastesedge | [] | + wcd | [] [] [] [] | + wcd-man | [] | + wdiff | [] [] [] [] [] [] [] | + wget | [] [] [] [] [] [] | + wyslij-po | [] [] [] [] | + xboard | [] [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] [] [] | + +--------------------------------------------------+ + da de el en en_GB en_ZA eo es et eu fa fi fr + 119 131 32 1 6 0 94 95 22 13 4 102 139 + + ga gd gl gu he hi hr hu hy ia id is it ja ka kk + +-------------------------------------------------+ + a2ps | [] [] [] [] | + aegis | [] | + anubis | [] [] [] [] | + aspell | [] [] [] [] [] | + bash | [] [] [] [] | + bfd | [] [] | + binutils | [] [] [] | + bison | [] | + bison-runtime | [] [] [] [] [] [] [] [] | + buzztrax | | + ccd2cue | [] | + ccide | [] [] | + cflow | [] [] [] | + clisp | | + coreutils | [] [] | + cpio | [] [] [] [] [] [] | + cppi | [] [] [] [] [] | + cpplib | [] [] | + cryptsetup | [] | + datamash | | + denemo | [] | + dfarc | [] [] [] | + dialog | [] [] [] [] [] [] [] [] [] [] | + dico | | + diffutils | [] [] [] [] | + dink | [] | + direvent | [] | + doodle | [] [] | + dos2unix | [] [] | + dos2unix-man | | + e2fsprogs | [] [] | + enscript | [] [] [] | + exif | [] [] [] [] [] [] | + fetchmail | [] [] [] | + findutils | [] [] [] [] [] [] [] | + flex | [] | + freedink | [] [] [] [] | + fusionforge | | + gas | [] | + gawk | [] () [] | + gcal | | + gcc | | + gdbm | | + gettext-examples | [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] [] | + gettext-tools | [] [] [] | + gjay | [] | + glunarclock | [] [] [] [] [] [] | + gnubiff | [] [] () | + gnubik | [] [] [] | + gnucash | () () () () () | + gnuchess | | + gnulib | [] [] [] [] [] | + gnunet | | + gnunet-gtk | | + gold | [] [] | + gphoto2 | [] [] [] [] | + gprof | [] [] [] [] | + gramadoir | [] [] [] | + grep | [] [] [] [] [] [] [] | + grub | [] [] [] | + gsasl | [] [] [] [] [] | + gss | [] [] [] [] [] | + gst-plugins-bad | [] [] [] | + gst-plugins-base | [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] [] [] | + gtkam | [] [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] [] [] | + guix | | + guix-packages | | + gutenprint | [] [] [] | + hello | [] [] [] [] [] | + help2man | [] [] [] | + help2man-texi | | + hylafax | [] | + idutils | [] [] | + iso_15924 | [] [] [] [] [] [] | + iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] | + iso_3166_2 | [] [] | + iso_4217 | [] [] [] [] [] [] | + iso_639 | [] [] [] [] [] [] [] [] [] | + iso_639_3 | [] [] | + iso_639_5 | | + jwhois | [] [] [] [] | + kbd | [] [] [] | + klavaro | [] [] [] [] [] | + ld | [] [] [] [] | + leafpad | [] [] [] [] [] [] [] () | + libc | [] [] [] [] [] | + libexif | [] | + libextractor | | + libgnutls | [] | + libgphoto2 | [] [] | + libgphoto2_port | [] [] | + libgsasl | [] [] [] [] | + libiconv | [] [] [] [] [] [] [] | + libidn | [] [] [] [] | + liferea | [] [] [] [] [] | + lilypond | [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] [] | + m4 | [] [] [] [] [] | + mailfromd | | + mailutils | | + make | [] [] [] [] | + man-db | [] [] | + man-db-manpages | [] [] | + midi-instruments | [] [] [] [] [] [] [] [] [] | + minicom | [] [] [] | + mkisofs | [] [] | + myserver | [] | + nano | [] [] [] [] [] [] | + opcodes | [] [] [] | + parted | [] [] [] [] [] | + pies | | + pnmixer | [] [] | + popt | [] [] [] [] [] [] [] [] [] [] | + procps-ng | | + procps-ng-man | | + psmisc | [] [] [] [] | + pspp | [] [] | + pushover | [] | + pwdutils | [] | + pyspread | | + radius | [] | + recode | [] [] [] [] [] [] [] | + recutils | | + rpm | [] | + rush | [] | + sarg | | + sed | [] [] [] [] [] [] [] | + sharutils | | + shishi | | + skribilo | [] | + solfege | [] [] | + solfege-manual | | + spotmachine | | + sudo | [] [] [] [] | + sudoers | [] [] [] | + sysstat | [] [] [] [] | + tar | [] [] [] [] [] [] | + texinfo | [] [] [] | + texinfo_document | [] [] [] | + tigervnc | | + tin | | + tin-man | | + tracgoogleappsa... | [] [] [] [] | + trader | [] [] | + util-linux | [] | + ve | [] | + vice | () () | + vmm | | + vorbis-tools | [] [] | + wastesedge | [] | + wcd | | + wcd-man | | + wdiff | [] [] [] | + wget | [] [] [] [] | + wyslij-po | [] [] [] | + xboard | | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] [] [] | + +-------------------------------------------------+ + ga gd gl gu he hi hr hu hy ia id is it ja ka kk + 35 2 47 4 8 2 60 71 2 6 81 11 87 57 0 3 + + kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl + +--------------------------------------------------+ + a2ps | [] [] | + aegis | [] | + anubis | [] [] [] | + aspell | [] [] | + bash | [] [] | + bfd | | + binutils | | + bison | [] | + bison-runtime | [] [] [] [] [] [] | + buzztrax | | + ccd2cue | | + ccide | [] [] | + cflow | [] | + clisp | [] | + coreutils | [] [] | + cpio | [] | + cppi | | + cpplib | [] | + cryptsetup | [] | + datamash | [] [] | + denemo | | + dfarc | [] [] | + dialog | [] [] [] [] [] [] | + dico | | + diffutils | [] [] [] | + dink | [] | + direvent | [] | + doodle | [] | + dos2unix | [] [] | + dos2unix-man | [] | + e2fsprogs | [] | + enscript | [] | + exif | [] [] [] | + fetchmail | [] | + findutils | [] [] | + flex | [] | + freedink | [] [] | + fusionforge | | + gas | | + gawk | [] | + gcal | | + gcc | | + gdbm | | + gettext-examples | [] [] [] [] [] [] | + gettext-runtime | [] [] [] | + gettext-tools | [] | + gjay | | + glunarclock | [] [] | + gnubiff | [] | + gnubik | [] [] | + gnucash | () () () () () () () [] | + gnuchess | [] [] | + gnulib | [] | + gnunet | | + gnunet-gtk | | + gold | | + gphoto2 | [] | + gprof | [] [] | + gramadoir | [] | + grep | [] [] | + grub | [] [] [] | + gsasl | [] | + gss | | + gst-plugins-bad | [] [] [] | + gst-plugins-base | [] [] [] | + gst-plugins-good | [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] | + gstreamer | [] [] [] | + gtick | [] | + gtkam | [] [] | + gtkspell | [] [] [] [] [] [] [] | + guix | | + guix-packages | | + gutenprint | [] | + hello | [] [] [] | + help2man | [] | + help2man-texi | | + hylafax | [] | + idutils | [] | + iso_15924 | () [] [] | + iso_3166 | [] [] [] () [] [] [] [] [] [] | + iso_3166_2 | () [] | + iso_4217 | () [] [] [] | + iso_639 | [] [] () [] [] [] [] | + iso_639_3 | [] () [] | + iso_639_5 | () | + jwhois | [] [] | + kbd | [] | + klavaro | [] [] | + ld | | + leafpad | [] [] [] [] [] | + libc | [] [] | + libexif | [] | + libextractor | [] | + libgnutls | [] [] | + libgphoto2 | [] | + libgphoto2_port | [] | + libgsasl | [] | + libiconv | [] [] | + libidn | [] | + liferea | [] [] [] | + lilypond | [] | + lordsawar | | + lprng | | + lynx | [] | + m4 | [] | + mailfromd | | + mailutils | | + make | [] [] | + man-db | [] | + man-db-manpages | [] | + midi-instruments | [] [] [] [] [] [] [] | + minicom | [] | + mkisofs | [] | + myserver | | + nano | [] [] [] | + opcodes | [] | + parted | [] [] | + pies | | + pnmixer | [] | + popt | [] [] [] [] [] | + procps-ng | | + procps-ng-man | | + psmisc | [] | + pspp | [] [] | + pushover | | + pwdutils | [] | + pyspread | | + radius | [] | + recode | [] [] | + recutils | [] | + rpm | [] | + rush | [] | + sarg | | + sed | [] [] | + sharutils | [] | + shishi | | + skribilo | | + solfege | [] [] | + solfege-manual | [] | + spotmachine | [] | + sudo | [] [] [] | + sudoers | [] [] [] | + sysstat | [] [] | + tar | [] [] [] | + texinfo | [] | + texinfo_document | [] | + tigervnc | [] | + tin | | + tin-man | | + tracgoogleappsa... | [] [] [] | + trader | [] | + util-linux | [] | + ve | [] | + vice | [] | + vmm | [] | + vorbis-tools | [] | + wastesedge | [] | + wcd | [] | + wcd-man | [] | + wdiff | [] | + wget | [] [] | + wyslij-po | [] | + xboard | [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] | + +--------------------------------------------------+ + kn ko ku ky lg lt lv mk ml mn mr ms mt nb ne nl + 5 15 4 6 0 13 23 3 3 3 4 11 2 42 1 125 + + nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + +------------------------------------------------+ + a2ps | [] [] [] [] [] [] [] | + aegis | [] [] | + anubis | [] [] [] | + aspell | [] [] [] [] [] [] [] | + bash | [] [] [] [] [] [] | + bfd | [] [] | + binutils | [] [] | + bison | [] [] [] | + bison-runtime | [] [] [] [] [] [] [] [] | + buzztrax | [] | + ccd2cue | [] [] | + ccide | [] [] [] | + cflow | [] [] [] | + clisp | [] | + coreutils | [] [] [] [] | + cpio | [] [] [] | + cppi | [] [] [] | + cpplib | [] [] [] | + cryptsetup | [] [] [] | + datamash | [] [] | + denemo | | + dfarc | [] [] [] | + dialog | [] [] [] [] [] [] [] | + dico | [] | + diffutils | [] [] [] | + dink | | + direvent | [] [] [] | + doodle | [] [] | + dos2unix | [] [] [] [] | + dos2unix-man | [] [] | + e2fsprogs | [] | + enscript | [] [] [] [] [] [] | + exif | [] [] [] [] [] [] | + fetchmail | [] [] [] | + findutils | [] [] [] [] [] [] | + flex | [] [] [] [] [] | + freedink | [] [] [] [] [] | + fusionforge | | + gas | | + gawk | [] | + gcal | | + gcc | | + gdbm | [] [] [] | + gettext-examples | [] [] [] [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] [] [] [] [] | + gettext-tools | [] [] [] [] [] [] [] | + gjay | [] | + glunarclock | [] [] [] [] [] [] | + gnubiff | [] | + gnubik | [] [] [] [] | + gnucash | () () () () () [] | + gnuchess | [] [] | + gnulib | [] [] [] [] [] | + gnunet | | + gnunet-gtk | | + gold | | + gphoto2 | [] [] [] [] [] | + gprof | [] [] [] [] | + gramadoir | [] [] | + grep | [] [] [] [] [] [] | + grub | [] [] [] [] [] | + gsasl | [] [] [] | + gss | [] [] [] [] | + gst-plugins-bad | [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] [] [] | + gstreamer | [] [] [] [] [] [] [] | + gtick | [] [] [] [] [] | + gtkam | [] [] [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] [] [] | + guix | | + guix-packages | | + gutenprint | [] [] | + hello | [] [] [] [] [] [] | + help2man | [] [] [] [] | + help2man-texi | [] | + hylafax | | + idutils | [] [] [] | + iso_15924 | [] () [] [] [] [] | + iso_3166 | [] [] [] [] () [] [] [] [] [] [] [] [] | + iso_3166_2 | [] () [] | + iso_4217 | [] [] () [] [] [] [] [] | + iso_639 | [] [] [] () [] [] [] [] [] [] | + iso_639_3 | [] () | + iso_639_5 | () [] | + jwhois | [] [] [] [] | + kbd | [] [] | + klavaro | [] [] [] [] [] | + ld | | + leafpad | [] [] [] [] [] [] [] [] | + libc | [] [] [] | + libexif | [] () [] | + libextractor | [] | + libgnutls | [] | + libgphoto2 | [] | + libgphoto2_port | [] [] [] [] [] | + libgsasl | [] [] [] [] | + libiconv | [] [] [] [] [] | + libidn | [] [] [] | + liferea | [] [] [] [] () [] [] | + lilypond | | + lordsawar | | + lprng | [] | + lynx | [] [] | + m4 | [] [] [] [] [] | + mailfromd | [] | + mailutils | [] | + make | [] [] [] | + man-db | [] [] [] | + man-db-manpages | [] [] [] | + midi-instruments | [] [] [] [] [] [] [] [] | + minicom | [] [] [] [] | + mkisofs | [] [] [] | + myserver | [] [] | + nano | [] [] [] [] [] [] | + opcodes | | + parted | [] [] [] [] [] [] | + pies | [] | + pnmixer | [] | + popt | [] [] [] [] [] [] | + procps-ng | [] | + procps-ng-man | [] | + psmisc | [] [] [] [] | + pspp | [] [] | + pushover | | + pwdutils | [] | + pyspread | [] [] | + radius | [] [] | + recode | [] [] [] [] [] [] [] [] | + recutils | [] [] | + rpm | [] | + rush | [] [] [] | + sarg | [] [] | + sed | [] [] [] [] [] [] [] [] | + sharutils | [] [] [] | + shishi | [] [] | + skribilo | [] | + solfege | [] [] [] | + solfege-manual | [] [] | + spotmachine | [] [] | + sudo | [] [] [] [] [] [] | + sudoers | [] [] [] [] | + sysstat | [] [] [] [] [] | + tar | [] [] [] [] [] | + texinfo | [] [] [] | + texinfo_document | [] [] | + tigervnc | [] [] [] | + tin | [] | + tin-man | | + tracgoogleappsa... | [] [] [] [] | + trader | [] [] | + util-linux | [] [] | + ve | [] [] [] | + vice | | + vmm | | + vorbis-tools | [] [] [] | + wastesedge | | + wcd | | + wcd-man | | + wdiff | [] [] [] [] [] | + wget | [] [] [] [] [] | + wyslij-po | [] [] [] [] | + xboard | [] [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] | + +------------------------------------------------+ + nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr + 7 3 6 114 1 12 88 32 82 3 40 45 7 101 + + sv sw ta te tg th tr uk ur vi wa wo zh_CN + +----------------------------------------------+ + a2ps | [] [] [] [] [] | + aegis | [] | + anubis | [] [] [] [] | + aspell | [] [] [] [] [] | + bash | [] [] [] [] | + bfd | [] [] [] | + binutils | [] [] [] | + bison | [] [] [] [] | + bison-runtime | [] [] [] [] [] [] | + buzztrax | [] [] [] | + ccd2cue | [] [] [] | + ccide | [] [] [] [] | + cflow | [] [] [] [] | + clisp | | + coreutils | [] [] [] | + cpio | [] [] [] [] [] | + cppi | [] [] [] [] | + cpplib | [] [] [] [] [] | + cryptsetup | [] [] [] | + datamash | [] [] [] | + denemo | [] | + dfarc | [] [] | + dialog | [] [] [] [] [] [] | + dico | [] | + diffutils | [] [] [] [] [] | + dink | [] | + direvent | [] [] | + doodle | [] [] | + dos2unix | [] [] [] [] | + dos2unix-man | [] [] [] | + e2fsprogs | [] [] [] [] | + enscript | [] [] [] [] | + exif | [] [] [] [] [] | + fetchmail | [] [] [] [] | + findutils | [] [] [] [] [] | + flex | [] [] [] [] | + freedink | [] [] [] | + fusionforge | | + gas | [] | + gawk | [] [] [] | + gcal | [] [] [] | + gcc | [] | + gdbm | [] [] | + gettext-examples | [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] | + gettext-tools | [] [] [] [] [] | + gjay | [] [] [] | + glunarclock | [] [] [] [] | + gnubiff | [] [] | + gnubik | [] [] [] [] | + gnucash | () () () () [] | + gnuchess | [] [] [] | + gnulib | [] [] [] [] | + gnunet | | + gnunet-gtk | | + gold | [] [] | + gphoto2 | [] [] [] [] | + gprof | [] [] [] [] | + gramadoir | [] [] [] | + grep | [] [] [] [] [] | + grub | [] [] [] [] | + gsasl | [] [] [] [] | + gss | [] [] [] | + gst-plugins-bad | [] [] [] [] [] | + gst-plugins-base | [] [] [] [] [] | + gst-plugins-good | [] [] [] [] [] | + gst-plugins-ugly | [] [] [] [] [] | + gstreamer | [] [] [] [] [] | + gtick | [] [] [] | + gtkam | [] [] [] [] | + gtkspell | [] [] [] [] [] [] [] | + guix | | + guix-packages | | + gutenprint | [] [] [] [] | + hello | [] [] [] [] [] [] | + help2man | [] [] [] | + help2man-texi | [] | + hylafax | [] | + idutils | [] [] [] | + iso_15924 | [] () [] [] () [] | + iso_3166 | [] [] () [] [] () [] [] | + iso_3166_2 | () [] [] () [] | + iso_4217 | [] () [] [] () [] | + iso_639 | [] [] [] () [] [] () [] [] | + iso_639_3 | [] () [] [] () | + iso_639_5 | () [] () | + jwhois | [] [] [] [] | + kbd | [] [] [] [] | + klavaro | [] [] [] [] [] [] | + ld | [] [] [] [] [] | + leafpad | [] [] [] [] [] [] | + libc | [] [] [] [] [] | + libexif | [] [] () | + libextractor | [] [] | + libgnutls | [] [] [] [] | + libgphoto2 | [] [] [] | + libgphoto2_port | [] [] [] [] | + libgsasl | [] [] [] [] | + libiconv | [] [] [] [] [] | + libidn | () [] [] [] | + liferea | [] [] [] [] [] | + lilypond | [] | + lordsawar | | + lprng | [] | + lynx | [] [] [] [] | + m4 | [] [] [] | + mailfromd | [] [] | + mailutils | [] | + make | [] [] [] [] | + man-db | [] [] [] | + man-db-manpages | [] [] | + midi-instruments | [] [] [] [] [] [] | + minicom | [] [] | + mkisofs | [] [] [] | + myserver | [] | + nano | [] [] [] [] | + opcodes | [] [] [] | + parted | [] [] [] [] [] | + pies | [] [] | + pnmixer | [] [] [] | + popt | [] [] [] [] [] [] [] | + procps-ng | [] [] | + procps-ng-man | [] | + psmisc | [] [] [] [] | + pspp | [] [] [] | + pushover | [] | + pwdutils | [] [] | + pyspread | [] | + radius | [] [] | + recode | [] [] [] [] | + recutils | [] [] [] | + rpm | [] [] [] [] | + rush | [] [] | + sarg | | + sed | [] [] [] [] [] | + sharutils | [] [] [] [] | + shishi | [] [] | + skribilo | [] [] | + solfege | [] [] [] [] | + solfege-manual | [] | + spotmachine | [] [] [] | + sudo | [] [] [] [] [] | + sudoers | [] [] [] [] | + sysstat | [] [] [] [] [] | + tar | [] [] [] [] [] | + texinfo | [] [] [] | + texinfo_document | [] | + tigervnc | [] [] [] | + tin | [] | + tin-man | | + tracgoogleappsa... | [] [] [] [] [] | + trader | [] | + util-linux | [] [] [] [] | + ve | [] [] [] [] | + vice | () () | + vmm | | + vorbis-tools | [] [] | + wastesedge | | + wcd | [] [] [] | + wcd-man | [] | + wdiff | [] [] [] [] | + wget | [] [] [] | + wyslij-po | [] [] | + xboard | [] [] | + xdg-user-dirs | [] [] [] [] [] [] [] [] | + xkeyboard-config | [] [] [] [] | + +----------------------------------------------+ + sv sw ta te tg th tr uk ur vi wa wo zh_CN + 106 1 4 3 0 13 51 115 1 125 7 1 100 + + zh_HK zh_TW + +-------------+ + a2ps | | 30 + aegis | | 9 + anubis | | 19 + aspell | | 29 + bash | [] | 23 + bfd | | 11 + binutils | | 12 + bison | [] | 18 + bison-runtime | [] | 38 + buzztrax | | 9 + ccd2cue | | 10 + ccide | | 17 + cflow | | 16 + clisp | | 10 + coreutils | | 18 + cpio | | 20 + cppi | | 17 + cpplib | [] | 19 + cryptsetup | | 14 + datamash | | 11 + denemo | | 5 + dfarc | | 17 + dialog | [] | 42 + dico | | 6 + diffutils | | 22 + dink | | 10 + direvent | | 11 + doodle | | 12 + dos2unix | [] | 18 + dos2unix-man | | 9 + e2fsprogs | | 15 + enscript | | 21 + exif | | 27 + fetchmail | | 19 + findutils | | 29 + flex | [] | 19 + freedink | | 24 + fusionforge | | 3 + gas | | 5 + gawk | | 13 + gcal | | 8 + gcc | | 2 + gdbm | | 10 + gettext-examples | [] [] | 40 + gettext-runtime | [] [] | 35 + gettext-tools | [] | 24 + gjay | | 9 + glunarclock | [] | 27 + gnubiff | | 9 + gnubik | | 19 + gnucash | () | 6 + gnuchess | | 11 + gnulib | | 23 + gnunet | | 1 + gnunet-gtk | | 1 + gold | | 7 + gphoto2 | [] | 19 + gprof | | 21 + gramadoir | | 14 + grep | [] | 31 + grub | | 21 + gsasl | [] | 19 + gss | | 17 + gst-plugins-bad | | 21 + gst-plugins-base | | 27 + gst-plugins-good | | 32 + gst-plugins-ugly | | 34 + gstreamer | [] | 32 + gtick | | 19 + gtkam | | 24 + gtkspell | [] [] | 48 + guix | | 2 + guix-packages | | 0 + gutenprint | | 15 + hello | [] | 30 + help2man | | 18 + help2man-texi | | 5 + hylafax | | 5 + idutils | | 14 + iso_15924 | [] | 23 + iso_3166 | [] [] | 58 + iso_3166_2 | | 9 + iso_4217 | [] [] | 28 + iso_639 | [] [] | 46 + iso_639_3 | | 10 + iso_639_5 | | 2 + jwhois | [] | 20 + kbd | | 17 + klavaro | | 30 + ld | [] | 15 + leafpad | [] | 39 + libc | [] | 24 + libexif | | 10 + libextractor | | 5 + libgnutls | | 13 + libgphoto2 | | 10 + libgphoto2_port | [] | 19 + libgsasl | | 18 + libiconv | [] | 29 + libidn | | 17 + liferea | | 29 + lilypond | | 11 + lordsawar | | 3 + lprng | | 3 + lynx | | 19 + m4 | [] | 22 + mailfromd | | 4 + mailutils | | 6 + make | | 19 + man-db | | 15 + man-db-manpages | | 10 + midi-instruments | [] | 43 + minicom | [] | 17 + mkisofs | | 13 + myserver | | 9 + nano | [] | 30 + opcodes | | 12 + parted | [] | 23 + pies | | 4 + pnmixer | | 9 + popt | [] | 36 + procps-ng | | 5 + procps-ng-man | | 4 + psmisc | [] | 22 + pspp | | 13 + pushover | | 6 + pwdutils | | 8 + pyspread | | 6 + radius | | 9 + recode | | 31 + recutils | | 10 + rpm | [] | 13 + rush | | 10 + sarg | | 4 + sed | [] | 35 + sharutils | | 13 + shishi | | 7 + skribilo | | 7 + solfege | | 21 + solfege-manual | | 9 + spotmachine | | 11 + sudo | | 26 + sudoers | | 22 + sysstat | | 23 + tar | [] | 30 + texinfo | | 17 + texinfo_document | | 13 + tigervnc | | 14 + tin | [] | 7 + tin-man | | 1 + tracgoogleappsa... | [] | 22 + trader | | 12 + util-linux | | 13 + ve | | 14 + vice | | 1 + vmm | | 3 + vorbis-tools | | 13 + wastesedge | | 3 + wcd | | 8 + wcd-man | | 3 + wdiff | [] | 23 + wget | | 21 + wyslij-po | | 14 + xboard | | 10 + xdg-user-dirs | [] [] | 68 + xkeyboard-config | [] | 28 + +-------------+ + 89 teams zh_HK zh_TW + 166 domains 7 42 2809 + + Some counters in the preceding matrix are higher than the number of +visible blocks let us expect. This is because a few extra PO files are +used for implementing regional variants of languages, or language +dialects. + + For a PO file in the matrix above to be effective, the package to +which it applies should also have been internationalized and distributed +as such by its maintainer. There might be an observable lag between the +mere existence a PO file and its wide availability in a distribution. + + If Jun 2014 seems to be old, you may fetch a more recent copy of this +'ABOUT-NLS' file on most GNU archive sites. The most up-to-date matrix +with full percentage details can be found at +'http://translationproject.org/extra/matrix.html'. + +1.5 Using 'gettext' in new packages +=================================== + +If you are writing a freely available program and want to +internationalize it you are welcome to use GNU 'gettext' in your +package. Of course you have to respect the GNU Lesser General Public +License which covers the use of the GNU 'gettext' library. This means +in particular that even non-free programs can use 'libintl' as a shared +library, whereas only free software can use 'libintl' as a static +library or use modified versions of 'libintl'. + + Once the sources are changed appropriately and the setup can handle +the use of 'gettext' the only thing missing are the translations. The +Free Translation Project is also available for packages which are not +developed inside the GNU project. Therefore the information given above +applies also for every other Free Software Project. Contact +'coordinator@translationproject.org' to make the '.pot' files available +to the translation teams. diff --git a/Makefile.am b/Makefile.am index 45008a4..6f2250b 100644 --- a/Makefile.am +++ b/Makefile.am @@ -25,6 +25,8 @@ # AUTOMAKE_OPTIONS = foreign -SUBDIRS = src man scripts +SUBDIRS = po src man scripts -EXTRA_DIST = autogen.sh Changelog +EXTRA_DIST = config.rpath m4/ChangeLog autogen.sh Changelog + +ACLOCAL_AMFLAGS = -I m4 diff --git a/config.rpath b/config.rpath new file mode 100755 index 0000000..98183ff --- /dev/null +++ b/config.rpath @@ -0,0 +1,684 @@ +#! /bin/sh +# Output a system dependent set of variables, describing how to set the +# run time search path of shared libraries in an executable. +# +# Copyright 1996-2016 Free Software Foundation, Inc. +# Taken from GNU libtool, 2001 +# Originally by Gordon Matzigkeit , 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. +# +# The first argument passed to this file is the canonical host specification, +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld +# should be set by the caller. +# +# The set of defined variables is at the end of this script. + +# Known limitations: +# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer +# than 256 bytes, otherwise the compiler driver will dump core. The only +# known workaround is to choose shorter directory names for the build +# directory and/or the installation directory. + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +shrext=.so + +host="$1" +host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +# Code taken from libtool.m4's _LT_CC_BASENAME. + +for cc_temp in $CC""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` + +# Code taken from libtool.m4's _LT_COMPILER_PIC. + +wl= +if test "$GCC" = yes; then + wl='-Wl,' +else + case "$host_os" in + aix*) + wl='-Wl,' + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) + ;; + hpux9* | hpux10* | hpux11*) + wl='-Wl,' + ;; + irix5* | irix6* | nonstopux*) + wl='-Wl,' + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + ecc*) + wl='-Wl,' + ;; + icc* | ifort*) + wl='-Wl,' + ;; + lf95*) + wl='-Wl,' + ;; + nagfor*) + wl='-Wl,-Wl,,' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + wl='-Wl,' + ;; + ccc*) + wl='-Wl,' + ;; + xl* | bgxl* | bgf* | mpixl*) + wl='-Wl,' + ;; + como) + wl='-lopt=' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ F* | *Sun*Fortran*) + wl= + ;; + *Sun\ C*) + wl='-Wl,' + ;; + esac + ;; + esac + ;; + newsos6) + ;; + *nto* | *qnx*) + ;; + osf3* | osf4* | osf5*) + wl='-Wl,' + ;; + rdos*) + ;; + solaris*) + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + wl='-Qoption ld ' + ;; + *) + wl='-Wl,' + ;; + esac + ;; + sunos4*) + wl='-Qoption ld ' + ;; + sysv4 | sysv4.2uw2* | sysv4.3*) + wl='-Wl,' + ;; + sysv4*MP*) + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + wl='-Wl,' + ;; + unicos*) + wl='-Wl,' + ;; + uts4*) + ;; + esac +fi + +# Code taken from libtool.m4's _LT_LINKER_SHLIBS. + +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no + +case "$host_os" in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + # Unlike libtool, we use -rpath here, not --rpath, since the documented + # option of GNU ld is called -rpath, not --rpath. + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + case "$host_os" in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + fi + ;; + amigaos*) + case "$host_cpu" in + powerpc) + ;; + m68k) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + cygwin* | mingw* | pw32* | cegcc*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + haiku*) + ;; + interix[3-9]*) + hardcode_direct=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + netbsd*) + ;; + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + else + ld_shlibs=no + fi + ;; + esac + ;; + sunos4*) + hardcode_direct=yes + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + esac + if test "$ld_shlibs" = no; then + hardcode_libdir_flag_spec= + fi +else + case "$host_os" in + aix3*) + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + else + aix_use_runtimelinking=no + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + fi + hardcode_direct=yes + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + fi + # Begin _LT_AC_SYS_LIBPATH_AIX. + echo 'int main () { return 0; }' > conftest.c + ${CC} ${LDFLAGS} conftest.c -o conftest + aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + fi + if test -z "$aix_libpath"; then + aix_libpath="/usr/lib:/lib" + fi + rm -f conftest.c conftest + # End _LT_AC_SYS_LIBPATH_AIX. + if test "$aix_use_runtimelinking" = yes; then + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + else + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + fi + fi + ;; + amigaos*) + case "$host_cpu" in + powerpc) + ;; + m68k) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + bsdi[45]*) + ;; + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + libext=lib + ;; + darwin* | rhapsody*) + hardcode_direct=no + if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then + : + else + ld_shlibs=no + fi + ;; + dgux*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + freebsd2.[01]*) + hardcode_direct=yes + hardcode_minus_L=yes + ;; + freebsd* | dragonfly*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + hpux9*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + hpux10*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + hpux11*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + ;; + *) + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + irix5* | irix6* | nonstopux*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + netbsd*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + newsos6) + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + *nto* | *qnx*) + ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + osf3*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + osf4* | osf5*) + if test "$GCC" = yes; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + # Both cc and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + solaris*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + sunos4*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + ;; + sysv4) + case $host_vendor in + sni) + hardcode_direct=yes # is this really true??? + ;; + siemens) + hardcode_direct=no + ;; + motorola) + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + ;; + sysv4.3*) + ;; + sysv4*MP*) + if test -d /usr/nec; then + ld_shlibs=yes + fi + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + ;; + sysv5* | sco3.2v5* | sco5v6*) + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator=':' + ;; + uts4*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + *) + ld_shlibs=no + ;; + esac +fi + +# Check dynamic linker characteristics +# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. +# Unlike libtool.m4, here we don't care about _all_ names of the library, but +# only about the one the linker finds when passed -lNAME. This is the last +# element of library_names_spec in libtool.m4, or possibly two of them if the +# linker has special search rules. +library_names_spec= # the last element of library_names_spec in libtool.m4 +libname_spec='lib$name' +case "$host_os" in + aix3*) + library_names_spec='$libname.a' + ;; + aix[4-9]*) + library_names_spec='$libname$shrext' + ;; + amigaos*) + case "$host_cpu" in + powerpc*) + library_names_spec='$libname$shrext' ;; + m68k) + library_names_spec='$libname.a' ;; + esac + ;; + beos*) + library_names_spec='$libname$shrext' + ;; + bsdi[45]*) + library_names_spec='$libname$shrext' + ;; + cygwin* | mingw* | pw32* | cegcc*) + shrext=.dll + library_names_spec='$libname.dll.a $libname.lib' + ;; + darwin* | rhapsody*) + shrext=.dylib + library_names_spec='$libname$shrext' + ;; + dgux*) + library_names_spec='$libname$shrext' + ;; + freebsd[23].*) + library_names_spec='$libname$shrext$versuffix' + ;; + freebsd* | dragonfly*) + library_names_spec='$libname$shrext' + ;; + gnu*) + library_names_spec='$libname$shrext' + ;; + haiku*) + library_names_spec='$libname$shrext' + ;; + hpux9* | hpux10* | hpux11*) + case $host_cpu in + ia64*) + shrext=.so + ;; + hppa*64*) + shrext=.sl + ;; + *) + shrext=.sl + ;; + esac + library_names_spec='$libname$shrext' + ;; + interix[3-9]*) + library_names_spec='$libname$shrext' + ;; + irix5* | irix6* | nonstopux*) + library_names_spec='$libname$shrext' + case "$host_os" in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; + *) libsuff= shlibsuff= ;; + esac + ;; + esac + ;; + linux*oldld* | linux*aout* | linux*coff*) + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + library_names_spec='$libname$shrext' + ;; + knetbsd*-gnu) + library_names_spec='$libname$shrext' + ;; + netbsd*) + library_names_spec='$libname$shrext' + ;; + newsos6) + library_names_spec='$libname$shrext' + ;; + *nto* | *qnx*) + library_names_spec='$libname$shrext' + ;; + openbsd*) + library_names_spec='$libname$shrext$versuffix' + ;; + os2*) + libname_spec='$name' + shrext=.dll + library_names_spec='$libname.a' + ;; + osf3* | osf4* | osf5*) + library_names_spec='$libname$shrext' + ;; + rdos*) + ;; + solaris*) + library_names_spec='$libname$shrext' + ;; + sunos4*) + library_names_spec='$libname$shrext$versuffix' + ;; + sysv4 | sysv4.3*) + library_names_spec='$libname$shrext' + ;; + sysv4*MP*) + library_names_spec='$libname$shrext' + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + library_names_spec='$libname$shrext' + ;; + tpf*) + library_names_spec='$libname$shrext' + ;; + uts4*) + library_names_spec='$libname$shrext' + ;; +esac + +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` +shlibext=`echo "$shrext" | sed -e 's,^\.,,'` +escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` + +LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' < +# +# Copying and distribution of this file, with or without modification, +# are permitted in any medium without royalty provided the copyright +# notice and this notice are preserved. This file is offered as-is, +# without any warranty. +# +# Origin: gettext-0.19.8 +GETTEXT_MACRO_VERSION = 0.19 + +PACKAGE = @PACKAGE@ +VERSION = @VERSION@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + +SED = @SED@ +SHELL = /bin/sh +@SET_MAKE@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ + +prefix = @prefix@ +exec_prefix = @exec_prefix@ +datarootdir = @datarootdir@ +datadir = @datadir@ +localedir = @localedir@ +gettextsrcdir = $(datadir)/gettext/po + +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ + +# We use $(mkdir_p). +# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as +# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, +# @install_sh@ does not start with $(SHELL), so we add it. +# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined +# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake +# versions, $(mkinstalldirs) and $(install_sh) are unused. +mkinstalldirs = $(SHELL) @install_sh@ -d +install_sh = $(SHELL) @install_sh@ +MKDIR_P = @MKDIR_P@ +mkdir_p = @mkdir_p@ + +# When building gettext-tools, we prefer to use the built programs +# rather than installed programs. However, we can't do that when we +# are cross compiling. +CROSS_COMPILING = @CROSS_COMPILING@ + +GMSGFMT_ = @GMSGFMT@ +GMSGFMT_no = @GMSGFMT@ +GMSGFMT_yes = @GMSGFMT_015@ +GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) +MSGFMT_ = @MSGFMT@ +MSGFMT_no = @MSGFMT@ +MSGFMT_yes = @MSGFMT_015@ +MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) +XGETTEXT_ = @XGETTEXT@ +XGETTEXT_no = @XGETTEXT@ +XGETTEXT_yes = @XGETTEXT_015@ +XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) +MSGMERGE = msgmerge +MSGMERGE_UPDATE = @MSGMERGE@ --update +MSGINIT = msginit +MSGCONV = msgconv +MSGFILTER = msgfilter + +POFILES = @POFILES@ +GMOFILES = @GMOFILES@ +UPDATEPOFILES = @UPDATEPOFILES@ +DUMMYPOFILES = @DUMMYPOFILES@ +DISTFILES.common = Makefile.in.in remove-potcdate.sin \ +$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) +DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ +$(POFILES) $(GMOFILES) \ +$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) + +POTFILES = \ + +CATALOGS = @CATALOGS@ + +POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot +POFILESDEPS_yes = $(POFILESDEPS_) +POFILESDEPS_no = +POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT)) + +DISTFILESDEPS_ = update-po +DISTFILESDEPS_yes = $(DISTFILESDEPS_) +DISTFILESDEPS_no = +DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO)) + +# Makevars gets inserted here. (Don't remove this line!) + +.SUFFIXES: +.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update + +.po.mo: + @echo "$(MSGFMT) -c -o $@ $<"; \ + $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ + +.po.gmo: + @lang=`echo $* | sed -e 's,.*/,,'`; \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \ + cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo + +.sin.sed: + sed -e '/^#/d' $< > t-$@ + mv t-$@ $@ + + +all: all-@USE_NLS@ + +all-yes: stamp-po +all-no: + +# Ensure that the gettext macros and this Makefile.in.in are in sync. +CHECK_MACRO_VERSION = \ + test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \ + || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \ + exit 1; \ + } + +# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no +# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because +# we don't want to bother translators with empty POT files). We assume that +# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. +# In this case, stamp-po is a nop (i.e. a phony target). + +# stamp-po is a timestamp denoting the last time at which the CATALOGS have +# been loosely updated. Its purpose is that when a developer or translator +# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, +# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent +# invocations of "make" will do nothing. This timestamp would not be necessary +# if updating the $(CATALOGS) would always touch them; however, the rule for +# $(POFILES) has been designed to not touch files that don't need to be +# changed. +stamp-po: $(srcdir)/$(DOMAIN).pot + @$(CHECK_MACRO_VERSION) + test ! -f $(srcdir)/$(DOMAIN).pot || \ + test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) + @test ! -f $(srcdir)/$(DOMAIN).pot || { \ + echo "touch stamp-po" && \ + echo timestamp > stamp-poT && \ + mv stamp-poT stamp-po; \ + } + +# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', +# otherwise packages like GCC can not be built if only parts of the source +# have been downloaded. + +# This target rebuilds $(DOMAIN).pot; it is an expensive operation. +# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. +# The determination of whether the package xyz is a GNU one is based on the +# heuristic whether some file in the top level directory mentions "GNU xyz". +# If GNU 'find' is available, we avoid grepping through monster files. +$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed + package_gnu="$(PACKAGE_GNU)"; \ + test -n "$$package_gnu" || { \ + if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \ + LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f \ + -size -10000000c -exec grep 'GNU @PACKAGE@' \ + /dev/null '{}' ';' 2>/dev/null; \ + else \ + LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \ + fi; \ + } | grep -v 'libtool:' >/dev/null; then \ + package_gnu=yes; \ + else \ + package_gnu=no; \ + fi; \ + }; \ + if test "$$package_gnu" = "yes"; then \ + package_prefix='GNU '; \ + else \ + package_prefix=''; \ + fi; \ + if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ + msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ + else \ + msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ + fi; \ + case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ + $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ + --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ + --files-from=$(srcdir)/POTFILES.in \ + --copyright-holder='$(COPYRIGHT_HOLDER)' \ + --msgid-bugs-address="$$msgid_bugs_address" \ + ;; \ + *) \ + $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ + --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \ + --files-from=$(srcdir)/POTFILES.in \ + --copyright-holder='$(COPYRIGHT_HOLDER)' \ + --package-name="$${package_prefix}@PACKAGE@" \ + --package-version='@VERSION@' \ + --msgid-bugs-address="$$msgid_bugs_address" \ + ;; \ + esac + test ! -f $(DOMAIN).po || { \ + if test -f $(srcdir)/$(DOMAIN).pot-header; then \ + sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \ + cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po; \ + rm -f $(DOMAIN).1po; \ + fi; \ + if test -f $(srcdir)/$(DOMAIN).pot; then \ + sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ + sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ + if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ + rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ + else \ + rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ + mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ + fi; \ + else \ + mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ + fi; \ + } + +# This rule has no dependencies: we don't need to update $(DOMAIN).pot at +# every "make" invocation, only create it when it is missing. +# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. +$(srcdir)/$(DOMAIN).pot: + $(MAKE) $(DOMAIN).pot-update + +# This target rebuilds a PO file if $(DOMAIN).pot has changed. +# Note that a PO file is not touched if it doesn't need to be changed. +$(POFILES): $(POFILESDEPS) + @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ + if test -f "$(srcdir)/$${lang}.po"; then \ + test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot; \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \ + cd $(srcdir) \ + && { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ + $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ + *) \ + $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \ + esac; \ + }; \ + else \ + $(MAKE) $${lang}.po-create; \ + fi + + +install: install-exec install-data +install-exec: +install-data: install-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ + for file in $(DISTFILES.common) Makevars.template; do \ + $(INSTALL_DATA) $(srcdir)/$$file \ + $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + for file in Makevars; do \ + rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + else \ + : ; \ + fi +install-data-no: all +install-data-yes: all + @catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + dir=$(localedir)/$$lang/LC_MESSAGES; \ + $(mkdir_p) $(DESTDIR)$$dir; \ + if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ + $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ + echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ + for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ + if test -n "$$lc"; then \ + if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ + link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ + mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ + for file in *; do \ + if test -f $$file; then \ + ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ + fi; \ + done); \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + else \ + if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ + :; \ + else \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + fi; \ + fi; \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ + ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ + cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ + fi; \ + done; \ + done + +install-strip: install + +installdirs: installdirs-exec installdirs-data +installdirs-exec: +installdirs-data: installdirs-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ + else \ + : ; \ + fi +installdirs-data-no: +installdirs-data-yes: + @catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + dir=$(localedir)/$$lang/LC_MESSAGES; \ + $(mkdir_p) $(DESTDIR)$$dir; \ + for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ + if test -n "$$lc"; then \ + if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ + link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ + mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ + for file in *; do \ + if test -f $$file; then \ + ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ + fi; \ + done); \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + else \ + if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ + :; \ + else \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + fi; \ + fi; \ + fi; \ + done; \ + done + +# Define this as empty until I found a useful application. +installcheck: + +uninstall: uninstall-exec uninstall-data +uninstall-exec: +uninstall-data: uninstall-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + for file in $(DISTFILES.common) Makevars.template; do \ + rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + else \ + : ; \ + fi +uninstall-data-no: +uninstall-data-yes: + catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + done; \ + done + +check: all + +info dvi ps pdf html tags TAGS ctags CTAGS ID: + +mostlyclean: + rm -f remove-potcdate.sed + rm -f stamp-poT + rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po + rm -fr *.o + +clean: mostlyclean + +distclean: clean + rm -f Makefile Makefile.in POTFILES *.mo + +maintainer-clean: distclean + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + rm -f stamp-po $(GMOFILES) + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +dist distdir: + test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS) + @$(MAKE) dist2 +# This is a separate target because 'update-po' must be executed before. +dist2: stamp-po $(DISTFILES) + dists="$(DISTFILES)"; \ + if test "$(PACKAGE)" = "gettext-tools"; then \ + dists="$$dists Makevars.template"; \ + fi; \ + if test -f $(srcdir)/$(DOMAIN).pot; then \ + dists="$$dists $(DOMAIN).pot stamp-po"; \ + fi; \ + if test -f $(srcdir)/ChangeLog; then \ + dists="$$dists ChangeLog"; \ + fi; \ + for i in 0 1 2 3 4 5 6 7 8 9; do \ + if test -f $(srcdir)/ChangeLog.$$i; then \ + dists="$$dists ChangeLog.$$i"; \ + fi; \ + done; \ + if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ + for file in $$dists; do \ + if test -f $$file; then \ + cp -p $$file $(distdir) || exit 1; \ + else \ + cp -p $(srcdir)/$$file $(distdir) || exit 1; \ + fi; \ + done + +update-po: Makefile + $(MAKE) $(DOMAIN).pot-update + test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) + $(MAKE) update-gmo + +# General rule for creating PO files. + +.nop.po-create: + @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ + echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ + exit 1 + +# General rule for updating PO files. + +.nop.po-update: + @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ + if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \ + tmpdir=`pwd`; \ + echo "$$lang:"; \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ + cd $(srcdir); \ + if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ + $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ + *) \ + $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ + esac; \ + }; then \ + if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ + rm -f $$tmpdir/$$lang.new.po; \ + else \ + if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ + :; \ + else \ + echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ + exit 1; \ + fi; \ + fi; \ + else \ + echo "msgmerge for $$lang.po failed!" 1>&2; \ + rm -f $$tmpdir/$$lang.new.po; \ + fi + +$(DUMMYPOFILES): + +update-gmo: Makefile $(GMOFILES) + @: + +# Recreate Makefile by invoking config.status. Explicitly invoke the shell, +# because execution permission bits may not work on the current file system. +# Use @SHELL@, which is the shell determined by autoconf for the use by its +# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. +Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ + cd $(top_builddir) \ + && @SHELL@ ./config.status $(subdir)/$@.in po-directories + +force: + +# Tell versions [3.59,3.63) of GNU make not to export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/po/Makevars b/po/Makevars new file mode 100644 index 0000000..0648ec7 --- /dev/null +++ b/po/Makevars @@ -0,0 +1,78 @@ +# Makefile variables for PO directory in any package using GNU gettext. + +# Usually the message domain is the same as the package name. +DOMAIN = $(PACKAGE) + +# These two variables depend on the location of this directory. +subdir = po +top_builddir = .. + +# These options get passed to xgettext. +XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ + +# This is the copyright holder that gets inserted into the header of the +# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding +# package. (Note that the msgstr strings, extracted from the package's +# sources, belong to the copyright holder of the package.) Translators are +# expected to transfer the copyright for their translations to this person +# or entity, or to disclaim their copyright. The empty string stands for +# the public domain; in this case the translators are expected to disclaim +# their copyright. +COPYRIGHT_HOLDER = Free Software Foundation, Inc. + +# This tells whether or not to prepend "GNU " prefix to the package +# name that gets inserted into the header of the $(DOMAIN).pot file. +# Possible values are "yes", "no", or empty. If it is empty, try to +# detect it automatically by scanning the files in $(top_srcdir) for +# "GNU packagename" string. +PACKAGE_GNU = + +# This is the email address or URL to which the translators shall report +# bugs in the untranslated strings: +# - Strings which are not entire sentences, see the maintainer guidelines +# in the GNU gettext documentation, section 'Preparing Strings'. +# - Strings which use unclear terms or require additional context to be +# understood. +# - Strings which make invalid assumptions about notation of date, time or +# money. +# - Pluralisation problems. +# - Incorrect English spelling. +# - Incorrect formatting. +# It can be your email address, or a mailing list address where translators +# can write to without being subscribed, or the URL of a web page through +# which the translators can contact you. +MSGID_BUGS_ADDRESS = + +# This is the list of locale categories, beyond LC_MESSAGES, for which the +# message catalogs shall be used. It is usually empty. +EXTRA_LOCALE_CATEGORIES = + +# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt' +# context. Possible values are "yes" and "no". Set this to yes if the +# package uses functions taking also a message context, like pgettext(), or +# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument. +USE_MSGCTXT = no + +# These options get passed to msgmerge. +# Useful options are in particular: +# --previous to keep previous msgids of translated messages, +# --quiet to reduce the verbosity. +MSGMERGE_OPTIONS = + +# These options get passed to msginit. +# If you want to disable line wrapping when writing PO files, add +# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and +# MSGINIT_OPTIONS. +MSGINIT_OPTIONS = + +# This tells whether or not to regenerate a PO file when $(DOMAIN).pot +# has changed. Possible values are "yes" and "no". Set this to no if +# the POT file is checked in the repository and the version control +# program ignores timestamps. +PO_DEPENDS_ON_POT = yes + +# This tells whether or not to forcibly update $(DOMAIN).pot and +# regenerate PO files on "make dist". Possible values are "yes" and +# "no". Set this to no if the POT file and PO files are maintained +# externally. +DIST_DEPENDS_ON_UPDATE_PO = yes diff --git a/po/POTFILES b/po/POTFILES new file mode 100644 index 0000000..0284136 --- /dev/null +++ b/po/POTFILES @@ -0,0 +1,3 @@ + ../src/gui/gui_common.cpp \ + ../src/gui/gtkmm.cpp \ + ../src/gui/x11.cpp diff --git a/po/POTFILES.in b/po/POTFILES.in new file mode 100644 index 0000000..a177f81 --- /dev/null +++ b/po/POTFILES.in @@ -0,0 +1,4 @@ +# List of source files which contain translatable strings. +src/gui/gui_common.cpp +src/gui/gtkmm.cpp +src/gui/x11.cpp diff --git a/po/Rules-quot b/po/Rules-quot new file mode 100644 index 0000000..baf6528 --- /dev/null +++ b/po/Rules-quot @@ -0,0 +1,58 @@ +# This file, Rules-quot, can be copied and used freely without restrictions. +# Special Makefile rules for English message catalogs with quotation marks. + +DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot + +.SUFFIXES: .insert-header .po-update-en + +en@quot.po-create: + $(MAKE) en@quot.po-update +en@boldquot.po-create: + $(MAKE) en@boldquot.po-update + +en@quot.po-update: en@quot.po-update-en +en@boldquot.po-update: en@boldquot.po-update-en + +.insert-header.po-update-en: + @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ + if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ + tmpdir=`pwd`; \ + echo "$$lang:"; \ + ll=`echo $$lang | sed -e 's/@.*//'`; \ + LC_ALL=C; export LC_ALL; \ + cd $(srcdir); \ + if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \ + | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \ + { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \ + $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \ + ;; \ + *) \ + $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \ + ;; \ + esac } 2>/dev/null > $$tmpdir/$$lang.new.po \ + ; then \ + if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ + rm -f $$tmpdir/$$lang.new.po; \ + else \ + if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ + :; \ + else \ + echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ + exit 1; \ + fi; \ + fi; \ + else \ + echo "creation of $$lang.po failed!" 1>&2; \ + rm -f $$tmpdir/$$lang.new.po; \ + fi + +en@quot.insert-header: insert-header.sin + sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header + +en@boldquot.insert-header: insert-header.sin + sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header + +mostlyclean: mostlyclean-quot +mostlyclean-quot: + rm -f *.insert-header diff --git a/po/boldquot.sed b/po/boldquot.sed new file mode 100644 index 0000000..4b937aa --- /dev/null +++ b/po/boldquot.sed @@ -0,0 +1,10 @@ +s/"\([^"]*\)"/“\1”/g +s/`\([^`']*\)'/‘\1’/g +s/ '\([^`']*\)' / ‘\1’ /g +s/ '\([^`']*\)'$/ ‘\1’/g +s/^'\([^`']*\)' /‘\1’ /g +s/“”/""/g +s/“/“/g +s/”/”/g +s/‘/‘/g +s/’/’/g diff --git a/po/en@boldquot.header b/po/en@boldquot.header new file mode 100644 index 0000000..fedb6a0 --- /dev/null +++ b/po/en@boldquot.header @@ -0,0 +1,25 @@ +# All this catalog "translates" are quotation characters. +# The msgids must be ASCII and therefore cannot contain real quotation +# characters, only substitutes like grave accent (0x60), apostrophe (0x27) +# and double quote (0x22). These substitutes look strange; see +# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html +# +# This catalog translates grave accent (0x60) and apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019). +# It also translates pairs of apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019) +# and pairs of quotation mark (0x22) to +# left double quotation mark (U+201C) and right double quotation mark (U+201D). +# +# When output to an UTF-8 terminal, the quotation characters appear perfectly. +# When output to an ISO-8859-1 terminal, the single quotation marks are +# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to +# grave/acute accent (by libiconv), and the double quotation marks are +# transliterated to 0x22. +# When output to an ASCII terminal, the single quotation marks are +# transliterated to apostrophes, and the double quotation marks are +# transliterated to 0x22. +# +# This catalog furthermore displays the text between the quotation marks in +# bold face, assuming the VT100/XTerm escape sequences. +# diff --git a/po/en@quot.header b/po/en@quot.header new file mode 100644 index 0000000..a9647fc --- /dev/null +++ b/po/en@quot.header @@ -0,0 +1,22 @@ +# All this catalog "translates" are quotation characters. +# The msgids must be ASCII and therefore cannot contain real quotation +# characters, only substitutes like grave accent (0x60), apostrophe (0x27) +# and double quote (0x22). These substitutes look strange; see +# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html +# +# This catalog translates grave accent (0x60) and apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019). +# It also translates pairs of apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019) +# and pairs of quotation mark (0x22) to +# left double quotation mark (U+201C) and right double quotation mark (U+201D). +# +# When output to an UTF-8 terminal, the quotation characters appear perfectly. +# When output to an ISO-8859-1 terminal, the single quotation marks are +# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to +# grave/acute accent (by libiconv), and the double quotation marks are +# transliterated to 0x22. +# When output to an ASCII terminal, the single quotation marks are +# transliterated to apostrophes, and the double quotation marks are +# transliterated to 0x22. +# diff --git a/po/hu.po b/po/hu.po new file mode 100644 index 0000000..1b59f60 --- /dev/null +++ b/po/hu.po @@ -0,0 +1,42 @@ +# Hungarian translation of xinput_calibrator +# Copyright (C) 2016 Sicom Systems Inc. +# This file is distributed under the same license as the xinput_calibrator package. +# Zoltán Böszörményi , 2016. +# +msgid "" +msgstr "" +"Project-Id-Version: xinput_calibrator 0.7.5\n" +"Report-Msgid-Bugs-To: http://github.com/tias/xinput_calibrator/issues\n" +"POT-Creation-Date: 2016-09-13 15:30+0200\n" +"PO-Revision-Date: 2016-09-13 15:15+0200\n" +"Last-Translator: Zoltán Böszörményi \n" +"Language-Team: Sicom Translator Team \n" +"Language: hu\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: src/gui/gui_common.cpp:41 src/gui/gui_common.cpp:42 +#, c-format +msgid "Touchscreen Calibration for '%s'" +msgstr "'%s' Érintőképernyő Kalibrációja" + +#: src/gui/gui_common.cpp:45 +msgid "Touchscreen Calibration" +msgstr "Érintőképernyő Kalibráció" + +#: src/gui/gui_common.cpp:49 +msgid "Press the point, use a stylus to increase precision." +msgstr "Nyomja meg a pontot, használjon érintőtollat a nagyobb pontossághoz." + +#: src/gui/gui_common.cpp:56 +msgid "(To abort, press any key or wait)" +msgstr "(Nyomjon meg egy gombot vagy várjon a megszakításhoz)" + +#: src/gui/gui_common.cpp:58 +msgid "(To abort, press any key)" +msgstr "(Nyomjon meg egy gombot a megszakításhoz)" + +#: src/gui/gtkmm.cpp:226 src/gui/x11.cpp:383 +msgid "Mis-click detected, restarting..." +msgstr "Hibás kattintás történt, újraindulás..." diff --git a/po/insert-header.sin b/po/insert-header.sin new file mode 100644 index 0000000..b26de01 --- /dev/null +++ b/po/insert-header.sin @@ -0,0 +1,23 @@ +# Sed script that inserts the file called HEADER before the header entry. +# +# At each occurrence of a line starting with "msgid ", we execute the following +# commands. At the first occurrence, insert the file. At the following +# occurrences, do nothing. The distinction between the first and the following +# occurrences is achieved by looking at the hold space. +/^msgid /{ +x +# Test if the hold space is empty. +s/m/m/ +ta +# Yes it was empty. First occurrence. Read the file. +r HEADER +# Output the file's contents by reading the next line. But don't lose the +# current line while doing this. +g +N +bb +:a +# The hold space was nonempty. Following occurrences. Do nothing. +x +:b +} diff --git a/po/quot.sed b/po/quot.sed new file mode 100644 index 0000000..0122c46 --- /dev/null +++ b/po/quot.sed @@ -0,0 +1,6 @@ +s/"\([^"]*\)"/“\1”/g +s/`\([^`']*\)'/‘\1’/g +s/ '\([^`']*\)' / ‘\1’ /g +s/ '\([^`']*\)'$/ ‘\1’/g +s/^'\([^`']*\)' /‘\1’ /g +s/“”/""/g diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin new file mode 100644 index 0000000..2436c49 --- /dev/null +++ b/po/remove-potcdate.sin @@ -0,0 +1,19 @@ +# Sed script that remove the POT-Creation-Date line in the header entry +# from a POT file. +# +# The distinction between the first and the following occurrences of the +# pattern is achieved by looking at the hold space. +/^"POT-Creation-Date: .*"$/{ +x +# Test if the hold space is empty. +s/P/P/ +ta +# Yes it was empty. First occurrence. Remove the line. +g +d +bb +:a +# The hold space was nonempty. Following occurrences. Do nothing. +x +:b +} diff --git a/po/xinput_calibrator.pot b/po/xinput_calibrator.pot new file mode 100644 index 0000000..254a799 --- /dev/null +++ b/po/xinput_calibrator.pot @@ -0,0 +1,43 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR Free Software Foundation, Inc. +# This file is distributed under the same license as the xinput_calibrator package. +# FIRST AUTHOR , YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: xinput_calibrator 0.7.5\n" +"Report-Msgid-Bugs-To: http://github.com/tias/xinput_calibrator/issues\n" +"POT-Creation-Date: 2016-09-13 15:30+0200\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME \n" +"Language-Team: LANGUAGE \n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#: src/gui/gui_common.cpp:41 src/gui/gui_common.cpp:42 +#, c-format +msgid "Touchscreen Calibration for '%s'" +msgstr "" + +#: src/gui/gui_common.cpp:45 +msgid "Touchscreen Calibration" +msgstr "" + +#: src/gui/gui_common.cpp:49 +msgid "Press the point, use a stylus to increase precision." +msgstr "" + +#: src/gui/gui_common.cpp:56 +msgid "(To abort, press any key or wait)" +msgstr "" + +#: src/gui/gui_common.cpp:58 +msgid "(To abort, press any key)" +msgstr "" + +#: src/gui/gtkmm.cpp:226 src/gui/x11.cpp:383 +msgid "Mis-click detected, restarting..." +msgstr "" diff --git a/src/Makefile.am b/src/Makefile.am index f52b71b..aa814d5 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -24,11 +24,13 @@ # OTHER DEALINGS IN THE SOFTWARE. # +AUTOMAKE_OPTIONS = subdir-objects + SUBDIRS = \ calibrator \ gui -AM_CXXFLAGS = -Wall -ansi -pedantic +AM_CXXFLAGS = -Wall -ansi -pedantic -DLOCALEDIR=\"$(localedir)\" bin_PROGRAMS = xinput_calibrator tester diff --git a/src/calibrator/Evdev.cpp b/src/calibrator/Evdev.cpp index 0889056..b1b8154 100644 --- a/src/calibrator/Evdev.cpp +++ b/src/calibrator/Evdev.cpp @@ -22,6 +22,8 @@ * THE SOFTWARE. */ +#include "config.h" + #include "calibrator/Evdev.hpp" #include diff --git a/src/calibrator/Usbtouchscreen.cpp b/src/calibrator/Usbtouchscreen.cpp index 9bbafe3..81dd5bd 100644 --- a/src/calibrator/Usbtouchscreen.cpp +++ b/src/calibrator/Usbtouchscreen.cpp @@ -150,7 +150,6 @@ bool CalibratorUsbtouchscreen::finish_data(const XYinfo &new_axys) void CalibratorUsbtouchscreen::read_int_parameter(const char *param, int &value) { - int dummy; char filename[100]; sprintf(filename, "%s/%s", module_prefix, param); FILE *fid = fopen(filename, "r"); @@ -159,13 +158,12 @@ void CalibratorUsbtouchscreen::read_int_parameter(const char *param, int &value) return; } - dummy = fscanf(fid, "%d", &value); + (void)fscanf(fid, "%d", &value); fclose(fid); } void CalibratorUsbtouchscreen::read_bool_parameter(const char *param, bool &value) { - char *dummy; char filename[100]; sprintf(filename, "%s/%s", module_prefix, param); FILE *fid = fopen(filename, "r"); @@ -175,9 +173,9 @@ void CalibratorUsbtouchscreen::read_bool_parameter(const char *param, bool &valu } char val[3]; - dummy = fgets(val, 2, fid); + (void)fgets(val, 2, fid); fclose(fid); - value = (val[0] == yesno(true)); + value = (val[0] == yesno(true)); } void CalibratorUsbtouchscreen::write_int_parameter(const char *param, const int value) diff --git a/src/gettext.h b/src/gettext.h new file mode 100644 index 0000000..841b072 --- /dev/null +++ b/src/gettext.h @@ -0,0 +1,292 @@ +/* Convenience header for conditional use of GNU . + Copyright (C) 1995-1998, 2000-2002, 2004-2006, 2009-2016 Free Software + Foundation, Inc. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#ifndef _LIBGETTEXT_H +#define _LIBGETTEXT_H 1 + +/* NLS can be disabled through the configure --disable-nls option. */ +#if ENABLE_NLS + +/* Get declarations of GNU message catalog functions. */ +# include + +/* You can set the DEFAULT_TEXT_DOMAIN macro to specify the domain used by + the gettext() and ngettext() macros. This is an alternative to calling + textdomain(), and is useful for libraries. */ +# ifdef DEFAULT_TEXT_DOMAIN +# undef gettext +# define gettext(Msgid) \ + dgettext (DEFAULT_TEXT_DOMAIN, Msgid) +# undef ngettext +# define ngettext(Msgid1, Msgid2, N) \ + dngettext (DEFAULT_TEXT_DOMAIN, Msgid1, Msgid2, N) +# endif + +#else + +/* Solaris /usr/include/locale.h includes /usr/include/libintl.h, which + chokes if dcgettext is defined as a macro. So include it now, to make + later inclusions of a NOP. We don't include + as well because people using "gettext.h" will not include , + and also including would fail on SunOS 4, whereas + is OK. */ +#if defined(__sun) +# include +#endif + +/* Many header files from the libstdc++ coming with g++ 3.3 or newer include + , which chokes if dcgettext is defined as a macro. So include + it now, to make later inclusions of a NOP. */ +#if defined(__cplusplus) && defined(__GNUG__) && (__GNUC__ >= 3) +# include +# if (__GLIBC__ >= 2 && !defined __UCLIBC__) || _GLIBCXX_HAVE_LIBINTL_H +# include +# endif +#endif + +/* Disabled NLS. + The casts to 'const char *' serve the purpose of producing warnings + for invalid uses of the value returned from these functions. + On pre-ANSI systems without 'const', the config.h file is supposed to + contain "#define const". */ +# undef gettext +# define gettext(Msgid) ((const char *) (Msgid)) +# undef dgettext +# define dgettext(Domainname, Msgid) ((void) (Domainname), gettext (Msgid)) +# undef dcgettext +# define dcgettext(Domainname, Msgid, Category) \ + ((void) (Category), dgettext (Domainname, Msgid)) +# undef ngettext +# define ngettext(Msgid1, Msgid2, N) \ + ((N) == 1 \ + ? ((void) (Msgid2), (const char *) (Msgid1)) \ + : ((void) (Msgid1), (const char *) (Msgid2))) +# undef dngettext +# define dngettext(Domainname, Msgid1, Msgid2, N) \ + ((void) (Domainname), ngettext (Msgid1, Msgid2, N)) +# undef dcngettext +# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \ + ((void) (Category), dngettext (Domainname, Msgid1, Msgid2, N)) +# undef textdomain +# define textdomain(Domainname) ((const char *) (Domainname)) +# undef bindtextdomain +# define bindtextdomain(Domainname, Dirname) \ + ((void) (Domainname), (const char *) (Dirname)) +# undef bind_textdomain_codeset +# define bind_textdomain_codeset(Domainname, Codeset) \ + ((void) (Domainname), (const char *) (Codeset)) + +#endif + +/* Prefer gnulib's setlocale override over libintl's setlocale override. */ +#ifdef GNULIB_defined_setlocale +# undef setlocale +# define setlocale rpl_setlocale +#endif + +/* A pseudo function call that serves as a marker for the automated + extraction of messages, but does not call gettext(). The run-time + translation is done at a different place in the code. + The argument, String, should be a literal string. Concatenated strings + and other string expressions won't work. + The macro's expansion is not parenthesized, so that it is suitable as + initializer for static 'char[]' or 'const char[]' variables. */ +#define gettext_noop(String) String + +/* The separator between msgctxt and msgid in a .mo file. */ +#define GETTEXT_CONTEXT_GLUE "\004" + +/* Pseudo function calls, taking a MSGCTXT and a MSGID instead of just a + MSGID. MSGCTXT and MSGID must be string literals. MSGCTXT should be + short and rarely need to change. + The letter 'p' stands for 'particular' or 'special'. */ +#ifdef DEFAULT_TEXT_DOMAIN +# define pgettext(Msgctxt, Msgid) \ + pgettext_aux (DEFAULT_TEXT_DOMAIN, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES) +#else +# define pgettext(Msgctxt, Msgid) \ + pgettext_aux (NULL, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES) +#endif +#define dpgettext(Domainname, Msgctxt, Msgid) \ + pgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, LC_MESSAGES) +#define dcpgettext(Domainname, Msgctxt, Msgid, Category) \ + pgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, Category) +#ifdef DEFAULT_TEXT_DOMAIN +# define npgettext(Msgctxt, Msgid, MsgidPlural, N) \ + npgettext_aux (DEFAULT_TEXT_DOMAIN, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES) +#else +# define npgettext(Msgctxt, Msgid, MsgidPlural, N) \ + npgettext_aux (NULL, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES) +#endif +#define dnpgettext(Domainname, Msgctxt, Msgid, MsgidPlural, N) \ + npgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, LC_MESSAGES) +#define dcnpgettext(Domainname, Msgctxt, Msgid, MsgidPlural, N, Category) \ + npgettext_aux (Domainname, Msgctxt GETTEXT_CONTEXT_GLUE Msgid, Msgid, MsgidPlural, N, Category) + +#ifdef __GNUC__ +__inline +#else +#ifdef __cplusplus +inline +#endif +#endif +static const char * +pgettext_aux (const char *domain, + const char *msg_ctxt_id, const char *msgid, + int category) +{ + const char *translation = dcgettext (domain, msg_ctxt_id, category); + if (translation == msg_ctxt_id) + return msgid; + else + return translation; +} + +#ifdef __GNUC__ +__inline +#else +#ifdef __cplusplus +inline +#endif +#endif +static const char * +npgettext_aux (const char *domain, + const char *msg_ctxt_id, const char *msgid, + const char *msgid_plural, unsigned long int n, + int category) +{ + const char *translation = + dcngettext (domain, msg_ctxt_id, msgid_plural, n, category); + if (translation == msg_ctxt_id || translation == msgid_plural) + return (n == 1 ? msgid : msgid_plural); + else + return translation; +} + +/* The same thing extended for non-constant arguments. Here MSGCTXT and MSGID + can be arbitrary expressions. But for string literals these macros are + less efficient than those above. */ + +#include + +#if (((__GNUC__ >= 3 || __GNUG__ >= 2) && !defined __STRICT_ANSI__) \ + /* || __STDC_VERSION__ >= 199901L */ ) +# define _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS 1 +#else +# define _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS 0 +#endif + +#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS +#include +#endif + +#define pgettext_expr(Msgctxt, Msgid) \ + dcpgettext_expr (NULL, Msgctxt, Msgid, LC_MESSAGES) +#define dpgettext_expr(Domainname, Msgctxt, Msgid) \ + dcpgettext_expr (Domainname, Msgctxt, Msgid, LC_MESSAGES) + +#ifdef __GNUC__ +__inline +#else +#ifdef __cplusplus +inline +#endif +#endif +static const char * +dcpgettext_expr (const char *domain, + const char *msgctxt, const char *msgid, + int category) +{ + size_t msgctxt_len = strlen (msgctxt) + 1; + size_t msgid_len = strlen (msgid) + 1; + const char *translation; +#if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS + char msg_ctxt_id[msgctxt_len + msgid_len]; +#else + char buf[1024]; + char *msg_ctxt_id = + (msgctxt_len + msgid_len <= sizeof (buf) + ? buf + : (char *) malloc (msgctxt_len + msgid_len)); + if (msg_ctxt_id != NULL) +#endif + { + int found_translation; + memcpy (msg_ctxt_id, msgctxt, msgctxt_len - 1); + msg_ctxt_id[msgctxt_len - 1] = '\004'; + memcpy (msg_ctxt_id + msgctxt_len, msgid, msgid_len); + translation = dcgettext (domain, msg_ctxt_id, category); + found_translation = (translation != msg_ctxt_id); +#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS + if (msg_ctxt_id != buf) + free (msg_ctxt_id); +#endif + if (found_translation) + return translation; + } + return msgid; +} + +#define npgettext_expr(Msgctxt, Msgid, MsgidPlural, N) \ + dcnpgettext_expr (NULL, Msgctxt, Msgid, MsgidPlural, N, LC_MESSAGES) +#define dnpgettext_expr(Domainname, Msgctxt, Msgid, MsgidPlural, N) \ + dcnpgettext_expr (Domainname, Msgctxt, Msgid, MsgidPlural, N, LC_MESSAGES) + +#ifdef __GNUC__ +__inline +#else +#ifdef __cplusplus +inline +#endif +#endif +static const char * +dcnpgettext_expr (const char *domain, + const char *msgctxt, const char *msgid, + const char *msgid_plural, unsigned long int n, + int category) +{ + size_t msgctxt_len = strlen (msgctxt) + 1; + size_t msgid_len = strlen (msgid) + 1; + const char *translation; +#if _LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS + char msg_ctxt_id[msgctxt_len + msgid_len]; +#else + char buf[1024]; + char *msg_ctxt_id = + (msgctxt_len + msgid_len <= sizeof (buf) + ? buf + : (char *) malloc (msgctxt_len + msgid_len)); + if (msg_ctxt_id != NULL) +#endif + { + int found_translation; + memcpy (msg_ctxt_id, msgctxt, msgctxt_len - 1); + msg_ctxt_id[msgctxt_len - 1] = '\004'; + memcpy (msg_ctxt_id + msgctxt_len, msgid, msgid_len); + translation = dcngettext (domain, msg_ctxt_id, msgid_plural, n, category); + found_translation = !(translation == msg_ctxt_id || translation == msgid_plural); +#if !_LIBGETTEXT_HAVE_VARIABLE_SIZE_ARRAYS + if (msg_ctxt_id != buf) + free (msg_ctxt_id); +#endif + if (found_translation) + return translation; + } + return (n == 1 ? msgid : msgid_plural); +} + +#endif /* _LIBGETTEXT_H */ diff --git a/src/gui/gtkmm.cpp b/src/gui/gtkmm.cpp index 9c189d0..62a8909 100644 --- a/src/gui/gtkmm.cpp +++ b/src/gui/gtkmm.cpp @@ -21,9 +21,15 @@ * THE SOFTWARE. */ +#include "config.h" + #include "gui/gtkmm.hpp" #include "gui/gui_common.hpp" +#include "gettext.h" + +#define _(String) gettext(String) + CalibrationArea::CalibrationArea(Calibrator* calibrator0) : calibrator(calibrator0), time_elapsed(0), message(NULL) { @@ -216,13 +222,17 @@ bool CalibrationArea::on_button_press_event(GdkEventButton *event) bool success = calibrator->add_click((int)event->x_root, (int)event->y_root); if (!success && calibrator->get_numclicks() == 0) { - draw_message("Mis-click detected, restarting..."); + setlocale(LC_ALL, ""); + draw_message(_("Mis-click detected, restarting...")); + setlocale(LC_ALL, "C"); } else { draw_message(NULL); } // Are we done yet? if (calibrator->get_numclicks() >= 4) { + // Make sure everything is applied in the C locale + setlocale(LC_ALL, "C"); // Recalibrate success = calibrator->finish(display_width, display_height); diff --git a/src/gui/gui_common.cpp b/src/gui/gui_common.cpp index 91ea993..eb4f9da 100644 --- a/src/gui/gui_common.cpp +++ b/src/gui/gui_common.cpp @@ -20,32 +20,43 @@ * THE SOFTWARE. */ +#include "config.h" + #include "gui/gui_common.hpp" +#include "gettext.h" + +#define _(String) gettext(String) void get_display_texts(std::list *texts, Calibrator *calibrator) { std::string str; + + setlocale(LC_ALL, ""); + /* 1st line */ str = "Touchscreen Calibration"; const char* sysfs_name = calibrator->get_sysfs_name(); - if(sysfs_name != NULL) { - str += " for '"; - str += sysfs_name; - str += "'"; - } - texts->push_back(str); + if (sysfs_name != NULL) { + char *tmp = (char *)alloca(strlen(_("Touchscreen Calibration for '%s'")) + strlen(sysfs_name) + 16); + sprintf(tmp, _("Touchscreen Calibration for '%s'"), sysfs_name); + str = tmp; + } else { + str = _("Touchscreen Calibration"); + } + texts->push_back(str); /* 2nd line */ - str = "Press the point, use a stylus to increase precision."; - texts->push_back(str); + str = _("Press the point, use a stylus to increase precision."); + texts->push_back(str); /* 3rd line */ str = ""; - texts->push_back(str); + texts->push_back(str); /* 4th line */ - str = "(To abort, press any key"; if(calibrator->get_use_timeout()) - str += " or wait)"; + str = _("(To abort, press any key or wait)"); else - str += ")"; - texts->push_back(str); + str = _("(To abort, press any key)"); + texts->push_back(str); + + setlocale(LC_ALL, "C"); } diff --git a/src/gui/x11.cpp b/src/gui/x11.cpp index c3176a9..6544419 100644 --- a/src/gui/x11.cpp +++ b/src/gui/x11.cpp @@ -20,6 +20,8 @@ * THE SOFTWARE. */ +#include "config.h" + #include "gui/x11.hpp" #include "gui/gui_common.hpp" @@ -43,6 +45,9 @@ #include #include +#include "gettext.h" + +#define _(String) gettext(String) const char* GuiCalibratorX11::colors[GuiCalibratorX11::NUM_COLORS] = {"BLACK", "WHITE", "GRAY", "DIMGRAY", "RED"}; @@ -50,6 +55,48 @@ const char* GuiCalibratorX11::colors[GuiCalibratorX11::NUM_COLORS] = {"BLACK", " void sigalarm_handler(int num); #endif +#if ENABLE_NLS +/* + * This code was copied as is from: + * http://xopendisplay.hilltopia.ca/2009/Mar/Xlib-tutorial-part-8----a-different-way-to-reach-wide-characters.html + */ +int utf8toXChar2b(XChar2b *output_r, int outsize, const char *input, int inlen) { + int j, k; + for(j = 0, k = 0; j < inlen && k < outsize; j ++){ + unsigned char c = input[j]; + if (c < 128) { + output_r[k].byte1 = 0; + output_r[k].byte2 = c; + k++; + } else if (c < 0xC0) { + /* we're inside a character we don't know */ + continue; + } else switch(c&0xF0){ + case 0xC0: case 0xD0: /* two bytes 5+6 = 11 bits */ + if (inlen < j+1){ return k; } + output_r[k].byte1 = (c&0x1C) >> 2; + j++; + output_r[k].byte2 = ((c&0x3) << 6) + (input[j]&0x3F); + k++; + break; + case 0xE0: /* three bytes 4+6+6 = 16 bits */ + if (inlen < j+2){ return k; } + j++; + output_r[k].byte1 = ((c&0xF) << 4) + ((input[j]&0x3C) >> 2); + c = input[j]; + j++; + output_r[k].byte2 = ((c&0x3) << 6) + (input[j]&0x3F); + k++; + break; + case 0xFF: + /* the character uses more than 16 bits */ + continue; + } + } + return k; +} +#endif + /// Create singleton instance associated to calibrator w void GuiCalibratorX11::make_instance(Calibrator* w) { @@ -71,6 +118,14 @@ GuiCalibratorX11::GuiCalibratorX11(Calibrator* calibrator0) } screen_num = DefaultScreen(display); // Load font and get font information structure +#if ENABLE_NLS + /* We want a font that can display any i18n characters */ + font_info = XLoadQueryFont(display, "-misc-fixed-*-*-*--15-*-*-*-*-*-iso10646-1"); + if (font_info) + printf("misc-fixed ISO10646 font was successfully loaded\n"); + else + /* Otherwise fall back to fonts with possibly missing characters */ +#endif font_info = XLoadQueryFont(display, "9x15"); if (font_info == NULL) { // fall back to native font @@ -244,9 +299,21 @@ void GuiCalibratorX11::redraw() y -= 3; for (std::list::reverse_iterator rev_it = display_texts.rbegin(); rev_it != display_texts.rend(); rev_it++) { +#if ENABLE_NLS + /* Safe length for our wide string if out UTF-8 string is really ASCII */ + int wlen = 2 * (*rev_it).length() + 16; + XChar2b *wstr = (XChar2b *)malloc(wlen); + + wlen = utf8toXChar2b(wstr, wlen, (*rev_it).c_str(), (*rev_it).length()); + int w = XTextWidth16(font_info, wstr, wlen); + XDrawString16(display, win, gc, x + (text_width-w)/2, y, + wstr, wlen); + free(wstr); +#else int w = XTextWidth(font_info, (*rev_it).c_str(), (*rev_it).length()); XDrawString(display, win, gc, x + (text_width-w)/2, y, (*rev_it).c_str(), (*rev_it).length()); +#endif y -= text_height; } @@ -312,11 +379,15 @@ void GuiCalibratorX11::on_button_press_event(XEvent event) bool success = calibrator->add_click(event.xbutton.x, event.xbutton.y); if (!success && calibrator->get_numclicks() == 0) { - draw_message("Mis-click detected, restarting..."); + setlocale(LC_ALL, ""); + draw_message(_("Mis-click detected, restarting...")); + setlocale(LC_ALL, "C"); } // Are we done yet? if (calibrator->get_numclicks() >= 4) { + // Make sure everything is applied in the C locale + setlocale(LC_ALL, "C"); // Recalibrate success = calibrator->finish(display_width, display_height); @@ -336,8 +407,15 @@ void GuiCalibratorX11::on_button_press_event(XEvent event) void GuiCalibratorX11::draw_message(const char* msg) { int text_height = font_info->ascent + font_info->descent; - int text_width = XTextWidth(font_info, msg, strlen(msg)); - + int msglen = strlen(msg); +#if ENABLE_NLS + int wlen = 2 * msglen + 16; + XChar2b *wstr = (XChar2b *)malloc(wlen); + wlen = utf8toXChar2b(wstr, wlen, msg, msglen); + int text_width = XTextWidth16(font_info, wstr, wlen); +#else + int text_width = XTextWidth(font_info, msg, msglen); +#endif int x = (display_width - text_width) / 2; int y = (display_height - text_height) / 2 + clock_radius + 60; XSetForeground(display, gc, pixel[BLACK]); @@ -345,7 +423,12 @@ void GuiCalibratorX11::draw_message(const char* msg) XDrawRectangle(display, win, gc, x - 10, y - text_height - 10, text_width + 20, text_height + 25); +#if ENABLE_NLS + XDrawString16(display, win, gc, x, y, wstr, wlen); + free(wstr); +#else XDrawString(display, win, gc, x, y, msg, strlen(msg)); +#endif } void GuiCalibratorX11::give_timer_signal() diff --git a/src/main_common.cpp b/src/main_common.cpp index da8a3a3..b63e6cf 100644 --- a/src/main_common.cpp +++ b/src/main_common.cpp @@ -21,6 +21,8 @@ * THE SOFTWARE. */ +#include "config.h" + #include "calibrator.hh" // Calibrator implementations diff --git a/src/main_gtkmm.cpp b/src/main_gtkmm.cpp index 2f00634..97753ac 100644 --- a/src/main_gtkmm.cpp +++ b/src/main_gtkmm.cpp @@ -21,17 +21,27 @@ * THE SOFTWARE. */ +#include "config.h" + // Must be before Xlib stuff #include #include #include +#include "gettext.h" + #include "calibrator.hh" #include "gui/gtkmm.hpp" int main(int argc, char** argv) { - Calibrator* calibrator = Calibrator::make_calibrator(argc, argv); + Calibrator* calibrator; + + setlocale(LC_ALL, "C"); + bindtextdomain(PACKAGE, LOCALEDIR); + textdomain(PACKAGE); + + calibrator = Calibrator::make_calibrator(argc, argv); // GTK-mm setup Gtk::Main kit(argc, argv); diff --git a/src/main_x11.cpp b/src/main_x11.cpp index 85a1f2b..64b64a1 100644 --- a/src/main_x11.cpp +++ b/src/main_x11.cpp @@ -20,13 +20,22 @@ * THE SOFTWARE. */ +#include "config.h" + #include // for pause() +#include "gettext.h" #include "calibrator.hh" #include "gui/x11.hpp" int main(int argc, char** argv) { - Calibrator* calibrator = Calibrator::make_calibrator(argc, argv); + Calibrator* calibrator; + + setlocale(LC_ALL, "C"); + bindtextdomain(PACKAGE, LOCALEDIR); + textdomain(PACKAGE); + + calibrator = Calibrator::make_calibrator(argc, argv); GuiCalibratorX11::make_instance( calibrator );