AMD

[Salnikoff]

Hi

Having macbook pro 15" 2011 late, IIYAMA 27" G-Master GB2788HS-B1

I want maximum HZ for that monitor (up to 144Hz)

Tell me please, can you do pathcer for AMD video cards?

I can pay for it...

Sorry for bad English

[Floris497]

First check if you can do it with SwitchResX alone. that might already work. (make sure to use an DP cable) if it does not I can take a look again at the AMD drivers.. but it don't think I can find something this time. I don't really have a lot of time to look into that. I'm wondering what you want out of a MacBook with 144Hz? no game is going to run smooth on a laptop like that I suppose :) however you can get an external PCIe thunderbolt enclosure, pun an AMD Card in there that is supported by macOS and That has FreeSync or if you don't care about FreeSync then you can also go for an Nvidia card. I've used this and it works pretty well. but don't expect full performance over thunderbolt vs PCIe in a desktop. hope this helps.

[Salnikoff]

Hi, 1. I tried do that with SwitchRezX, only 60Hz 1920x1080, I talk about it with SwithcRezX developer and he says i need something else (pixelpatcher)… but i have did it on windows 10 throw bootcamp and having 100Hz 1920x1080 (https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher <https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher>). But i do not like windows…) 2. Using DP cable 3. I’m not gamer, it’s not comfortable for my eyes look at 27’’ 60Hz 4. external PCIe thunderbolt enclosure… i don’t need performance. Thank you )

…

20 февр. 2017 г., в 1:20, Floris Fredrikze ***@***.***> написал(а): First check if you can do it with SwitchResX alone. that might already work. (make sure to use an DP cable) if it does not I can take a look again at the AMD drivers.. but it don't think I can find something this time. I don't really have a lot of time to look into that. I'm wondering what you want out of a MacBook with 144Hz? no game is going to run smooth on a laptop like that I suppose :) however you can get an external PCIe thunderbolt enclosure, pun an AMD Card in there that is supported by macOS and That has FreeSync or if you don't care about FreeSync then you can also go for an Nvidia card. I've used this and it works pretty well. but don't expect full performance over thunderbolt vs PCIe in a desktop. hope this helps. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#142 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AYr3CUsHk2e_8MtcYqUW6oqngg_FWVZ4ks5reMArgaJpZM4MFh5L>.

[Floris497]

I see, I did have a look yesterday.. but not really a good one. I need to get the file that was patched in 10.9.1 and see what it did and where in the driver this lock is.. it will take some time to figure that out.. in the meantime you could try both CoreDisplay (or IOKit if CoreDisplay doesn't work ) and see if it the custom resolutions in switchresx get active. (I'm pretty sure you can get to 80Hz at least using custom resolutions in switchresx.. but not sure)

[Salnikoff]

Ok, i’ll try it tomorrow (tuesday) Thank you!

…

20 февр. 2017 г., в 10:08, Floris Fredrikze ***@***.***> написал(а): I see, I did have a look yesterday.. but not really a good one. I need to get the file that was patched in 10.9.1 and see what it did and where in the driver this lock is.. it will take some time to figure that out.. in the meantime you could try both CoreDisplay (or IOKit if CoreDisplay doesn't work ) and see if it the custom resolutions in switchresx get active. (I'm pretty sure you can get to 80Hz at least using custom resolutions in switchresx.. but not sure) — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#142 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AYr3CSLGB6KAMSscKjvQK2jJAK9qZQcoks5reTwFgaJpZM4MFh5L>.

[Salnikoff]

Hi! I did all by instruction step by step… look: 1. https://youtu.be/98LAooAgmds 2. http://prntscr.com/ebigaf

…

20 февр. 2017 г., в 10:08, Floris Fredrikze ***@***.***> написал(а): I see, I did have a look yesterday.. but not really a good one. I need to get the file that was patched in 10.9.1 and see what it did and where in the driver this lock is.. it will take some time to figure that out.. in the meantime you could try both CoreDisplay (or IOKit if CoreDisplay doesn't work ) and see if it the custom resolutions in switchresx get active. (I'm pretty sure you can get to 80Hz at least using custom resolutions in switchresx.. but not sure) — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#142 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AYr3CSLGB6KAMSscKjvQK2jJAK9qZQcoks5reTwFgaJpZM4MFh5L>.

[Floris497]

After saving in switchresx and rebooting what does the custom resolutions panel say?

[Salnikoff]

not installed…

…

21 февр. 2017 г., в 15:11, Floris Fredrikze ***@***.***> написал(а): After saving in switchresx and rebooting what does the custom resolutions panel say? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#142 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AYr3Cbx-aXZa0SU2GfYqm1eHkFkMoWpbks5retRcgaJpZM4MFh5L>.

[Floris497]

I see, but after rebooting it should either say 'active' or something like 'inactive - not supported?' I don't remember the apply now button.. you could try it

[Salnikoff]

There is no other buttons, only «apply now(experimental)» That is all… there is other button, don’t remember how it calls in early version of switchrezx

…

21 февр. 2017 г., в 15:15, Floris Fredrikze ***@***.***> написал(а): I see, but after rebooting it should either say 'active' or something like 'inactive - not supported?' I don't remember the apply now button.. you could try it — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#142 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AYr3CeZZOrc01XxZmt8gYeRRy0VT2BVUks5retVIgaJpZM4MFh5L>.

[Salnikoff]

maybe i need to do something else?

…

21 февр. 2017 г., в 15:15, Floris Fredrikze ***@***.***> написал(а): I see, but after rebooting it should either say 'active' or something like 'inactive - not supported?' I don't remember the apply now button.. you could try it — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#142 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AYr3CeZZOrc01XxZmt8gYeRRy0VT2BVUks5retVIgaJpZM4MFh5L>.

[Floris497]

Cmd+s then close switchresx and reboot the whole mac.. should do the trick.. I expected you to be on 10.12.X

[Salnikoff]

I’ll try to install older version SwitchResX… look what’s happing )

…

21 февр. 2017 г., в 15:42, Floris Fredrikze ***@***.***> написал(а): Cmd+s then close switchresx and reboot the whole mac.. should do the trick.. I expected you to be on 10.12.X — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#142 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AYr3CaSxFTB8KvIotLw7m3m5ExqAHprgks5retuvgaJpZM4MFh5L>.

[Floris497]

I've not used this version will check when I'm home

[Salnikoff]

http://prntscr.com/ebjqyd <http://prntscr.com/ebjqyd>

…

21 февр. 2017 г., в 16:13, Floris Fredrikze ***@***.***> написал(а): I've not used this version will check when I'm home — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#142 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AYr3CfZ-hjrMRHKZxwDVejRlD-oS0Ouwks5reuLxgaJpZM4MFh5L>.

[Floris497]

Looks like you do need an separate AMD patch.. let me check what i can do for you but it's going to take a bit of time