Support composite primary keys in batch enumeration

lib/job-iteration/active_record_batch_enumerator.rb

@@ -1,5 +1,7 @@
 # frozen_string_literal: true
 
+require_relative "active_record_batch_enumerator/column_manager"
+
 module JobIteration
   # Builds Batch Enumerator based on ActiveRecord Relation.
   # @see EnumeratorBuilder
@@ -11,26 +13,15 @@ class ActiveRecordBatchEnumerator
     def initialize(relation, columns: nil, batch_size: 100, timezone: nil, cursor: nil)
       @batch_size = batch_size
       @timezone = timezone
-      @primary_key = "#{relation.table_name}.#{relation.primary_key}"
-      @columns = Array(columns&.map(&:to_s) || @primary_key)
-      @primary_key_index = @columns.index(@primary_key) || @columns.index(relation.primary_key)
-      @pluck_columns = if @primary_key_index
-        @columns
-      else
-        @columns.dup << @primary_key
-      end
+      @column_mgr = ColumnManager.new(relation: relation, columns: columns)
       @cursor = Array.wrap(cursor)
       @initial_cursor = @cursor
-      raise ArgumentError, "Must specify at least one column" if @columns.empty?
-      if relation.joins_values.present? && !@columns.all? { |column| column.to_s.include?(".") }
-        raise ArgumentError, "You need to specify fully-qualified columns if you join a table"
-      end
 
       if relation.arel.orders.present? || relation.arel.taken.present?
         raise JobIteration::ActiveRecordCursor::ConditionNotSupportedError
       end
 
-      @base_relation = relation.reorder(@columns.join(","))
+      @base_relation = relation.reorder(@column_mgr.columns.join(","))
     end
 
     def each
@@ -53,7 +44,7 @@ def next_batch
         relation = relation.where(*conditions)
       end
 
-      cursor_values, ids = relation.uncached do
+      cursor_values, pkey_ids = relation.uncached do
         pluck_columns(relation)
       end
 
@@ -62,25 +53,40 @@ def next_batch
         @cursor = @initial_cursor
         return
       end
+
       # The primary key was plucked, but original cursor did not include it, so we should remove it
-      cursor.pop unless @primary_key_index
-      @cursor = Array.wrap(cursor)
+      @cursor = @column_mgr.remove_missing_pkey_values(cursor)
 
-      # Yields relations by selecting the primary keys of records in the batch.
-      # Post.where(published: nil) results in an enumerator of relations like:
-      # Post.where(published: nil, ids: batch_of_ids)
-      @base_relation.where(@primary_key => ids)
+      filter_relation_with_primary_key(pkey_ids)
     end
 
-    def pluck_columns(relation)
-      if @pluck_columns.size == 1 # only the primary key
-        column_values = relation.pluck(*@pluck_columns)
-        return [column_values, column_values]
+    # Yields relations by selecting the primary keys of records in the batch.
+    # Post.where(published: nil) results in an enumerator of relations like:
+    # Post.where(published: nil, ids: batch_of_ids)
+    def filter_relation_with_primary_key(primary_key_values)
+      pkey = @column_mgr.primary_key
+      pkey_values = primary_key_values
+
+      # If the primary key is only composed of a single column, simplify the
+      # query. This keeps us compatible with Rails prior to 7.1 where composite
+      # primary keys were introduced along with the syntax that allows you to
+      # query for multi-column values.
+      if pkey.size <= 1
+        pkey = pkey.first
+        pkey_values = pkey_values.map(&:first)
       end
 
-      column_values = relation.pluck(*@pluck_columns)
-      primary_key_index = @primary_key_index || -1
-      primary_key_values = column_values.map { |values| values[primary_key_index] }
+      @base_relation.where(pkey => pkey_values)
+    end
+
+    def pluck_columns(relation)
+      column_values = relation.pluck(*@column_mgr.pluck_columns)
+
+      # Pluck behaves differently when only one column is given. By using zip,
+      # we make the output consistent (at the cost of more object allocation).
+      column_values = column_values.zip if @column_mgr.pluck_columns.size == 1
+
+      primary_key_values = @column_mgr.pkey_values(column_values)
 
       serialize_column_values!(column_values)
       [column_values, primary_key_values]
@@ -94,15 +100,15 @@ def cursor_value
 
     def conditions
       column_index = @cursor.size - 1
-      column = @columns[column_index]
-      where_clause = if @columns.size == @cursor.size
+      column = @column_mgr.columns[column_index]
+      where_clause = if @column_mgr.columns.size == @cursor.size
         "#{column} > ?"
       else
         "#{column} >= ?"
       end
       while column_index > 0
         column_index -= 1
-        column = @columns[column_index]
+        column = @column_mgr.columns[column_index]
         where_clause = "#{column} > ? OR (#{column} = ? AND (#{where_clause}))"
       end
       ret = @cursor.reduce([where_clause]) { |params, value| params << value << value }

lib/job-iteration/active_record_batch_enumerator/column_manager.rb

@@ -0,0 +1,138 @@
+# frozen_string_literal: true
+
+module JobIteration
+  class ActiveRecordBatchEnumerator
+    # Utility class for the batch enumerator that manages the columns that need
+    # to be plucked. It ensures primary key columns are plucked so that records
+    # in the batch can be queried for efficiently.
+    #
+    # @see ActiveRecordBatchEnumerator
+    class ColumnManager
+      # @param relation [ActiveRecord::Relation] - relation to manage columns for
+      # @param columns [Array<String,Symbol>, nil] - set of columns to select
+      def initialize(relation:, columns:)
+        @table_name = relation.table_name
+        @primary_key = Array(relation.primary_key)
+        @qualified_pkey_columns = @primary_key.map { |col| qualify_column(col) }
+        @columns = columns&.map(&:to_s) || @qualified_pkey_columns
+
+        validate_columns!(relation)
+        initialize_pluck_columns_and_pkey_positions
+      end
+
+      # @return [Array<String>]
+      #   The list of columns to be plucked. If no columns were specified, this
+      #   list contains the fully qualified primary key column(s).
+      attr_reader :columns
+
+      # @return [Array<String>]
+      #   The list of primary key columns for the relation. These columns are
+      #   not qualified with the table name.
+      attr_reader :primary_key
+
+      # @return [Array<String>]
+      #   The full set of columns to be plucked from the relation. This is a
+      #   superset of `columns` and is guaranteed to contain all of the primary
+      #   key columns on the relation.
+      attr_reader :pluck_columns
+
+      # @param column_values [Array<Array>]
+      #   List of rows where each row contains values as determined by
+      #   `pluck_columns`.
+      #
+      # @return [Array<Array>]
+      #   List where each item contains the primary key column values for the
+      #   corresponding row. Values are guaranteed to be in the same order as
+      #   the columns are listed in `primary_key`.
+      def pkey_values(column_values)
+        column_values.map do |values|
+          @qualified_pkey_columns.map do |pkey_column|
+            pkey_column_idx = @primary_key_index_map[pkey_column]
+            values[pkey_column_idx]
+          end
+        end
+      end
+
+      # @param cursor [Array]
+      #   A list of values for a single row, as determined by `pluck_columns`.
+      #
+      # @return [Array]
+      #   The same values that were passed in, minus any primary key column
+      #   values that do not appear in `columns`.
+      def remove_missing_pkey_values(cursor)
+        cursor.pop(@missing_pkey_count)
+        cursor
+      end
+
+      private
+
+      def qualify_column(column)
+        "#{@table_name}.#{column}"
+      end
+
+      def validate_columns!(relation)
+        raise ArgumentError, "Must specify at least one column" if @columns.empty?
+
+        if relation.joins_values.present? && !@columns.all? { |column| column.to_s.include?(".") }
+          raise ArgumentError, "You need to specify fully-qualified columns if you join a table"
+        end
+      end
+
+      # This method is responsible for initializing several instance variables:
+      #
+      # * `@pluck_columns` [Array<String>] -
+      #       The set of columns to pluck.
+      # * `@missing_pkey_count` [Integer] -
+      #       The number of primary keys that were missing from `@columns`.
+      # * `@primary_key_index_map` [Hash<String:Integer>] -
+      #       Hash mapping all primary key columns to their position in
+      #       `@pluck_columns`.
+      def initialize_pluck_columns_and_pkey_positions
+        @pluck_columns = @columns.dup
+        initial_pkey_index_map = find_initial_primary_key_indices(@pluck_columns)
+
+        missing_pkey_columns = initial_pkey_index_map.select { |_, idx| idx.nil? }.keys
+        missing_pkey_index_map = add_missing_pkey_columns!(missing_pkey_columns, @pluck_columns)
+        @missing_pkey_count = missing_pkey_index_map.size
+
+        # Compute the location of each primary key column in `@pluck_columns`.
+        @primary_key_index_map = initial_pkey_index_map.merge(missing_pkey_index_map)
+      end
+
+      # Figure out which primary key columns are already included in `columns`
+      # and track their position in the array.
+      #
+      # @param columns [Array<String>] - list of columns
+      #
+      # @return [Hash<String:Integer,nil>]
+      #   A hash containing all of the fully qualified primary key columns as
+      #   its keys. Values are the position of each column in the `columns`
+      #   array. A `nil` value indicates the column is not present in `columns`.
+      def find_initial_primary_key_indices(columns)
+        @primary_key.each_with_object({}) do |pkey_column, indices|
+          fully_qualified_pkey_column = qualify_column(pkey_column)
+          idx = columns.index(pkey_column) || columns.index(fully_qualified_pkey_column)
+
+          indices[fully_qualified_pkey_column] = idx
+        end
+      end
+
+      # Takes a set of primary key columns and adds them to `columns`.
+      #
+      # @note - mutates `columns`
+      #
+      # @param missing_columns [Array<String>] - set of missing pkey columns
+      # @param columns [Array<String>] - set of columns to pluck
+      #
+      # @return [Hash<String:Integer>]
+      #   A hash containing all of the values from `missing_columns` as its
+      #   keys. Values are the position of those columns in `columns`.
+      def add_missing_pkey_columns!(missing_columns, columns)
+        missing_columns.each_with_object({}) do |pkey_column, indices|
+          indices[pkey_column] = columns.size
+          columns << pkey_column
+        end
+      end
+    end
+  end
+end

test/test_helper.rb

@@ -116,6 +116,12 @@ class TestCase
     def skip_until_version(version)
       skip("Deferred until version #{version}") if Gem::Version.new(JobIteration::VERSION) < Gem::Version.new(version)
     end
+
+    def skip_until_active_record_version(version)
+      return if ActiveRecord.version >= Gem::Version.new(version)
+
+      skip("Deferred until ActiveRecord version #{version}")
+    end
   end
 end
 
@@ -150,6 +156,7 @@ def truncate_fixtures
     ActiveRecord::Base.connection.truncate(TravelRoute.table_name)
     ActiveRecord::Base.connection.truncate(Product.table_name)
     ActiveRecord::Base.connection.truncate(Comment.table_name)
+    ActiveRecord::Base.connection.truncate(Order.table_name)
   end
 
   def with_global_default_retry_backoff(backoff)