TKB home Smart Energy Wallplug TZ69 can’t see the voltage measurement

[lucas66a]

Hi,

I have a couple of TKB TZ69 Smart Energy Wallplug’s, Homey see’s them fine using your driver.

However I previously used these with home assistant and they reported back Voltage, this is missing on Homey. I would very much like to graph voltage as I think I’m getting spikes that i'd like to investigate.

Is it possible to add the voltage measurements in the driver?

Thanks

[caseda]

i'll see if i can quickly add this capability into the app's driver this weekend.
As i don't have any of these devices i can't test if it works or not, so i will be reliant on you (or anyone else with this device) for this.

[lucas66a]

Fantastic, I’ll be happy to test.

…

Sent from my iPad On 12 Sep 2019, at 19:28, R Mengers <notifications@github.com<mailto:notifications@github.com>> wrote: i'll see if i can quickly add this capability into the app's driver this weekend. As i don't have any of these devices i can't test if it works or not, so i will be reliant on you (or anyone else with this device) for this. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fcaseda%2Fcom.tkbhome%2Fissues%2F57%3Femail_source%3Dnotifications%26email_token%3DALOE2PGHDV3KFQFG3GQXYHLQJKC4HA5CNFSM4H4NOLIKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6S2F6Q%23issuecomment-530948858&data=02%7C01%7C%7C82cca48144c84fc1596e08d737aefcd3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637039097006586557&sdata=VyqeEhC4BqCqgea4eqL%2FiZ%2FUecGkdxSKgTN%2Be6nW9z0%3D&reserved=0>, or mute the thread<https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FALOE2PDDJVJADVBJYNEDPWTQJKC4HANCNFSM4H4NOLIA&data=02%7C01%7C%7C82cca48144c84fc1596e08d737aefcd3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637039097006606579&sdata=4%2Fwt2ovFIaHVaQzLWz%2BGSDXVdDNckbbQ6rnY2FYsXV8%3D&reserved=0>.

[Ramonzuidgeest]

I have the same problem. No watt report. When do you think it will work? Or Dit I install it wrong? Tkb home TZ69G
Thanks

[caseda]

@Ramonzuidgeest Wattage not reporting and the OP's Voltage entirely not being there, are 2 different values/issues, And as i don't have this device myself it is really hard to tell you what is wrong if you didn't change any of the advanced settings

[Ramonzuidgeest]

Oke, thanks. Will you support this device in the future?
Greetings?

[CyberSponk]

Got a TZ69 since a few days. Firmware of Device is 1026, Tkb-App 2.0.5 and Homey 3.1.0. Wattage (Energie, the left value) works. Could not say if Kwh (Energiezähler, the richgt vaulue) works because pluged the Device today. Perhaps helps this Information.

[Ramonzuidgeest]

I paired again and the watt report works fine. Thanks

[caseda]

the voltage information should be visible now in the 2.0.6 version of the app.

You can find the 2.0.6 update in the test part of the appstore:
https://homey.app/a/com.tkbhome/test/
And please confirm that your issue was fixed in this update.

[lucas66a]

Hi, I can confirm I can see the voltage measurement, looks good. I’ll keep an eye on this and report on any issues. Thanks for making these changes.