Muses72323

Arduino library for communication with the audio chip Muses72323. Written for ESP32 and fully tested. The data sheets can be found here (pdf).

Download

Download the latest release over at the Releases page.

Example

#include <Arduino.h>
#include <Muses72323.h>

#define VOLUME_ADDRESS      0   // internal chip address
#define VOLUME_CS           21  // GPIO port for chip select (latch)
#define VOL_MAX   0
#define VOL_MIN   -447

// volume attenuator
Muses72323 muses = Muses72323(&SPI, 100000UL, VOLUME_ADDRESS, VOLUME_CS);


void setup() {
  Serial.begin(115200);
  while (!Serial);
  Serial.println("Booting...");

  muses.begin();

  // enable internal clock for soft stepping
  Serial.println("Set internal clock source for softstep");
  muses.setInternalClock(true);
  // enable soft stepping
  Serial.println("enable softstep");
  muses.setSoftStep(true);
  // mute
  Serial.println("mute output");
  muses.mute();

  // Zerocrossing and independent left & right attentuaion is enabled by default
  // set gain to  +6dB
  Serial.println("Set gain to +6dB");
  muses.setGain(2);

  // set volume to -200
  Serial.println("Set volume to -200");
  muses.setVolume(-200);
  delay(2000);

  // set different values for left and right
  Serial.println("Set left volume to -447 and right volume to -1");
  muses.setVolume(-447, -1);
}

// the loop function runs over and over again until power down or reset
void loop() {

}

Problems

Please post any problems on the Issues page.

License

Please read over the LICENSE file included in the project.