Help creating an EXE

[wes1993]

Hello!!
I love this project and i want to save in my pc.
can you explain to me how can i build and EXE so i don't need to install everytime python etc?
Thanks a lot
Stefano

[metahnetoutage]

Hello, To save you time, it is cheaper for you to learn how to connect to iCloud via JavaScript api provided by Apple. You can do authentication and not waste time on this project. You will still be Abel to do so much directly with Apple stuff. Why? Because this project does bad hack job. It is not supported anymore, it is for older versions of iPhone until around 5/6 maybe 7. Spend quality 40 hours learning how to connect via JavaScript and do authentication and spend day $100 on Apple license if you want to do more. That is time and money well spent. You expectations for this project are at 9, when it is at 5 level at best. I am a developer. Dima

…

On Wed, Apr 1, 2020 at 3:05 PM wes1993 ***@***.***> wrote: Hello!! I love this project and i want to save in my pc. can you explain to me how can i build and EXE so i don't need to install everytime python etc? Thanks a lot Stefano — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#146>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALE26ZRDNS4XKX4GEZFJGD3RKO3ELANCNFSM4LZUCCUA> .

[wes1993]

Thanks a lot for your reply.
I’m not a developer so I don’t know how to use Apple api... also is for personal use so I 100€ day is so much expensive for me... :(
Do you know different software for downloading photos from iCloud?
The Apple iCloud software and iCloud.com won’t work very well... :(

[metahnetoutage]

I was going to do my own...This is the closest I found. To help you out your comment should be: Open up a terminal and navigate to directory where you’d aced this python file. Name of program -d /pathtoDirectoryWhereyousave The system will prompt you for user name And password. Enter both So suppose you saved the file at mycooldir. You would cd there. Then type name of application -d ./pathtodestination If you check docs you will see this, now, make sure you have -d before your directory. I replied once in a threat you can see my answer. Let me know if you need any extra help. Session is 5 mins so do not download a lot. Dima

…

On Wed, Apr 1, 2020 at 4:11 PM wes1993 ***@***.***> wrote: Thanks a lot for your reply. I’m not a developer so I don’t know how to use Apple api... also is for personal use so I 100€ day is so much expensive for me... :( Do you know different software for downloading photos from iCloud? The Apple iCloud software and iCloud.com won’t work very well... :( — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#146 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALE26ZUNG7BYAEABMBCINWTRKPC3JANCNFSM4LZUCCUA> .

[Quentame]

@metahnetoutage

Do you have a link to the iCloud JS API ?

I found this https://developer.apple.com/icloud/cloudkit/

Thanks.

[metahnetoutage]

I can give you yes. https://developer.apple.com/documentation/cloudkitjs Take your Time and do not rush. It’s is not a one two three.

…

On Wed, Apr 1, 2020 at 4:31 PM Quentame ***@***.***> wrote: @metahnetoutage <https://github.com/metahnetoutage> Do you have a link to the iCloud JS API ? I found this. Thanks. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#146 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALE26ZRYASS3R7CDQSST2NLRKPFE5ANCNFSM4LZUCCUA> .

[RhetTbull]

This might help: auto-py-to-exe It can convert the python script into a stand-alone .exe

[wes1993]

Thanks a lot to everyone for the help!!! :-D
sorry for my late reply but i'm in Italy...
@RhetTbull I have used auto-py-to-exe but won't work... after building just black window....
@metahnetoutage i'm using windows.. i have do the command you have told to me but it will just download the photos not make an exe... probably I do not understand.. :-(

If i try to use cx_freeze i can start the EXE but after i have inserted the email i will receive this error:

raise RuntimeError("No recommended backend was available. Install the "
RuntimeError: No recommended backend was available. Install the keyrings.alt package if you want to use the non-recommended backends. See README.rst for details.

Searching on the we i have foud this but i don't have understand where i need to pu the strings.. :-(

https://stackoverflow.com/questions/50094328/using-keyring-in-cx-freeze-no-recommended-backend-was-available/50392688

Thanks a lot
Stefano

[metahnetoutage]

You have prevailed where many have failed congrats! For more, you need to make your own app or read more than Readme and again experiment!

…

On Thu, Apr 2, 2020 at 12:53 AM wes1993 ***@***.***> wrote: Thanks a lot to everyone for the help!!! :-D sorry for my late reply but i'm in Italy... @RhetTbull <https://github.com/RhetTbull> I have used auto-py-to-exe but won't work... after building just black window.... @metahnetoutage <https://github.com/metahnetoutage> i'm using windows.. i have do the command you have told to me but it will just download the photos not make an exe... probably I do not understand.. :-( Thanks a lot Stefano — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#146 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALE26ZUJQ46QFQ5ORSE5CADRKRABDANCNFSM4LZUCCUA> .

[wes1993]

@metahnetoutage
Thanks a lot

[metahnetoutage]

You utmost welcome! I will start such project in May! You are welcome to work and submit code upon reviewing.

…

On Thu, Apr 2, 2020 at 1:39 AM wes1993 ***@***.***> wrote: @metahnetoutage <https://github.com/metahnetoutage> Thanks a lot — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#146 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALE26ZUSU2C2JOC4BYD6AJLRKRFLHANCNFSM4LZUCCUA> .

[wes1993]

Thanks a lot!! this is a good news!!
i have solved part of the problem for now... i have this error now...

Do you have some suggestion?
Regards
Stefano

[metahnetoutage]

I had same issue. Solution, get rid of both username and password. And press Enter. At each prompt for email or password supply them. Let me know if it works!

…

On Thu, Apr 2, 2020 at 4:08 AM wes1993 ***@***.***> wrote: Thanks a lot!! this is a good news!! i have solved part of the problem for now... i have tis error now... [image: image] <https://user-images.githubusercontent.com/52070589/78242800-f6301a80-74e2-11ea-8287-82ba14ac4254.png> — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#146 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ALE26ZXE4LYZZBGDSZ44D7TRKRWZZANCNFSM4LZUCCUA> .

[metahnetoutage]

After you succeed, do not bother fixing it! Why? It is honestly not worth it! That is why I am working on JS api! I can make it work. Via JavaScript and will dis o in May.

…

On Thu, Apr 2, 2020 at 4:09 AM Dima Dimov ***@***.***> wrote: I had same issue. Solution, get rid of both username and password. And press Enter. At each prompt for email or password supply them. Let me know if it works! On Thu, Apr 2, 2020 at 4:08 AM wes1993 ***@***.***> wrote: > Thanks a lot!! this is a good news!! > i have solved part of the problem for now... i have tis error now... > [image: image] > <https://user-images.githubusercontent.com/52070589/78242800-f6301a80-74e2-11ea-8287-82ba14ac4254.png> > > — > You are receiving this because you were mentioned. > > > Reply to this email directly, view it on GitHub > <#146 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/ALE26ZXE4LYZZBGDSZ44D7TRKRWZZANCNFSM4LZUCCUA> > . >

[wes1993]

Thanks a lot i will try!!
And perfect for may!!
Stefano

[wes1993]

After you succeed, do not bother fixing it! Why? It is honestly not worth it! That is why I am working on JS api! I can make it work. Via JavaScript and will dis o in May.
…
On Thu, Apr 2, 2020 at 4:09 AM Dima Dimov @.> wrote: I had same issue. Solution, get rid of both username and password. And press Enter. At each prompt for email or password supply them. Let me know if it works! On Thu, Apr 2, 2020 at 4:08 AM wes1993 @.> wrote: > Thanks a lot!! this is a good news!! > i have solved part of the problem for now... i have tis error now... > [image: image] > https://user-images.githubusercontent.com/52070589/78242800-f6301a80-74e2-11ea-8287-82ba14ac4254.png > > — > You are receiving this because you were mentioned. > > > Reply to this email directly, view it on GitHub > <#146 (comment)>, > or unsubscribe > https://github.com/notifications/unsubscribe-auth/ALE26ZXE4LYZZBGDSZ44D7TRKRWZZANCNFSM4LZUCCUA > . >

Do you have some news about the JS api?