AirFreshening / aromamode not working

Is there an existing issue for this?

• I have searched the existing issues and no issue is describing my issue

The problem

When changing the Air Freshing (in the Ecovans mobile app) the AirFreshening event isn't fired.

With the debuging mode see an MQTT payload coming in where the content contains an aromamode that changes to 0 when turend off, and 1 when turned on.

With which model does the problem occur?

Deebot T9 series

From which source you have installed the library?

GitHub

Version of the ecovacs-deebot.js library

0.9.1

Version of Node.js

v18.12.1

Operating system

Windows

Anything in the logs that might be useful?

No response

Additional information

No response

[mrbungle64]

@cactusss

The AirFreshening event is currently only working with the AirBot Z1 (Air Purifier).
Not all events or commands handled in the code, are confirmed to work (for all possible models) ...

[mrbungle64]

@cactusss

With the debuging mode see an MQTT payload coming in where the content contains an aromamode that changes to 0 when turend off, and 1 when turned on.

Why don't you post the specific payload directly?

[mrbungle64]

@cactusss

Btw: Where can I find the repository of your project?

@cactusss

With the debuging mode see an MQTT payload coming in where the content contains an aromamode that changes to 0 when turend off, and 1 when turned on.

Why don't you post the specific payload directly?

You mean this:
{"content":"{\"rn\":\"bd_setting\",\"d\":{\"header\":{\"pri\":1,\"tzm\":480,\"ts\":\"1673182887542\",\"ver\":\"0.0.1\",\"fwVer\":\"2.5.5\",\"hwVer\":\"0.1.1\"},\"body\":{\"data\":{\"d_id\":\"465781\",\"d_sum\":1,\"d_seq\":0,\"d_val\":{\"gid\":\"G1672729495988\",\"index\":\"0000000294\",\"simpleMode\":0,\"isPressurized\":1,\"fanspeed\":0,\"continue\":0,\"waterAmount\":1,\"DND\":1,\"mopremind\":0,\"mopmode\":3,\"aromamode\":0,\"personalClean\":0,\"autocollect\":1,\"occurrenceTime\":\"1673182887521\"}}}}}"}

@cactusss

The AirFreshening event is currently only working with the AirBot Z1 (Air Purifier). Not all events or commands handled in the code, are confirmed to work (for all possible models) ...

Bummer. Since the aromamode exists, why not implement it ;)

@cactusss

Btw: Where can I find the repository of your project?

You can't. Yet. I don't know yet how to publish it to GitHub, I'll figure that out as soon as I have published my app in the Homey App store. But it's not complete yet. I you want to have a loog at what I'v got until now I can send you a zip or something

[mrbungle64]

@cactusss

@cactusss

With the debuging mode see an MQTT payload coming in where the content contains an aromamode that changes to 0 when turend off, and 1 when turned on.

Why don't you post the specific payload directly?

You mean this: {"content":"{\"rn\":\"bd_setting\",\"d\":{\"header\":{\"pri\":1,\"tzm\":480,\"ts\":\"1673182887542\",\"ver\":\"0.0.1\",\"fwVer\":\"2.5.5\",\"hwVer\":\"0.1.1\"},\"body\":{\"data\":{\"d_id\":\"465781\",\"d_sum\":1,\"d_seq\":0,\"d_val\":{\"gid\":\"G1672729495988\",\"index\":\"0000000294\",\"simpleMode\":0,\"isPressurized\":1,\"fanspeed\":0,\"continue\":0,\"waterAmount\":1,\"DND\":1,\"mopremind\":0,\"mopmode\":3,\"aromamode\":0,\"personalClean\":0,\"autocollect\":1,\"occurrenceTime\":\"1673182887521\"}}}}}"}

Yes, but this is the payload of one of the FwBuryPoint messages, right?

I don't think that the FwBuryPoint messages are part of the API.
I think it's more for debugging purposes or something similar.

@cactusss
The AirFreshening event is currently only working with the AirBot Z1 (Air Purifier). Not all events or commands handled in the code, are confirmed to work (for all possible models) ...

Bummer. Since the aromamode exists, why not implement it ;)

Of course I can implement it, but as long as we only have the FwBuryPoint message that contains the aromamode value, it'll be more like a "bonus" event...

@cactusss
Btw: Where can I find the repository of your project?

You can't. Yet. I don't know yet how to publish it to GitHub, I'll figure that out as soon as I have published my app in the Homey App store. But it's not complete yet.

Why don't you publish it directly? 😉
Sooner or later it will become mandatory anyway...

I you want to have a loog at what I'v got until now I can send you a zip or something

It's not really necessary (if you publish it sooner or later) 😉

@cactusss
Yes, but this is the payload of one of the FwBuryPoint messages, right?

I don't think that the FwBuryPoint messages are part of the API. I think it's more for debugging purposes or something similar.

@cactusss
The AirFreshening event is currently only working with the AirBot Z1 (Air Purifier). Not all events or commands handled in the code, are confirmed to work (for all possible models) ...

Bummer. Since the aromamode exists, why not implement it ;)

Of course I can implement it, but as long as we only have the FwBuryPoint message that contains the aromamode value, it'll be more like a "bonus" event...

Please do ;)

@cactusss
Btw: Where can I find the repository of your project?

You can't. Yet. I don't know yet how to publish it to GitHub, I'll figure that out as soon as I have published my app in the Homey App store. But it's not complete yet.

Why don't you publish it directly? 😉 Sooner or later it will become mandatory anyway...

You got a point, I'll have to anyway. Don't have a clue what I'm doing with Github Desktop (suddenly I had 6 repositories, it cleaned them up) but here it is: https://github.com/cactusss/nl.onzewifi.DeebotT9

[mrbungle64]

@cactusss

This is actually a fork of this repository, right? 😉
What is the difference between that two implementations?

You can send me an email to start a conversation on Discord, if you like.
(I'll give you my Discord username via email)